http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강문성 ( M. S. Kang ),배승종 ( S. J. Bae ),정광욱 ( K. W. Jung ),윤춘경 ( C. G. Yoon ),최중대 ( J. D. Choi ) 한국농공학회 2009 한국농공학회 학술대회초록집 Vol.2009 No.-
유달율은 임의 유역의 배출부하량이 해당유역의 말단에 도달하는 비를 말하며, 해당 유역의 오염물질 유출특성 지표로서 수질오염총량관리제와 같은 유역관리계획에서 목표수질 설정 및 할당부하량을 결정하는데 중요한 요소로 작용한다. 따라서 오염총량관리계획의 수립 및 시행을 위해서는 원단위, 배출 및 유달부하량의 과학적인 산정이 필요하다. 따라서, 본 연구의 목적은 논과 산림에서의 유출에 따른 오염물질 배출 및 유달 특성을 조사함으로서 수질오염총량기법의 고도화를 위한 논과 산림에서의 유황별 유달부하량 산정방법을 정립하고 제시하는 데 있다. 본 연구에서는 경기도 광주시 도척면 방도리에 위치하고 있는 한강수계의 유정천 최상류 지점의 논과 산림으로 우점된 소유역을 시험유역으로 선정하였으며, 토지이용 및 유역특성에 따른 부하량을 모니터링하기 위한 수문/수질 계측망을 구성하였다. 논과 산림 소유역의 측점별 수위-유량 관계를 수립하였으며, 결정계수 (R<sup>2</sup>)는 각각 0.93과 0.82의 값을 나타내었다. 논과 산림 측점에서 총 19회의 폭우사상을 모니터링 하였으며, 선행건기일수는 0-17일 사이의 값을 보였으며, 강수량은 10-100mm의 범위를 보였다. 논과 산림의 유출율의 범위는 각각 0.11-0.84와 0.38-0.72의 범위를 보임으로서, 산림지 유역의 유출률이 산림과 논을 포함하는 하류의 소유역보다 큰 값을 나타냈다. 논 측점과 산림 측점 소유역에서의 수질항목별 유량-부하량 관계를 수립하였으며, 수질항목별 결정 계수는 논과 산림측점에서 각각 0.69-0.99와 0.92-0.99의 범위를 보였다. 강우사상 계급에 따른 논과 산림 측점에서의 유황별 수질항목별 농도변화는 유사한 경향을 보였다. 수위 변화에 따른 pH와 EC 농도 변화는 두 측점에서 모두 반비례 관계를 나타내었다. 부유물질과 COD 농도는 초기 수위 상승시 높은 농도를 보임으로서, 수위변화에 대하여 뚜렷한 경향을 보였다. 수위변화에 따른 BOD 농도 변화는 초기 강우시 높은 값을 보였고, 강우가 지속되면서 뚜렷한 경향을 보이지는 않았다. 영양물질인 총질소와 총인의 농도 변화는 강우 초기에 높은 값을 보였다. 본 연구의 경우에는 유역면적이 비교적 작으면서 도시화가 이루어지지 않은 산림지와 논 우점지역인 단순 토지이용을 대상으로 하고 있다. 따라서, 일반적으로 알려진 유출 특성과 수질농도 변화와는 다소 차이가 있는 것으로 나타났다. 따라서, 보다 과학적이고 합리적인 결과를 도출하기 위해서는 지속적이고 과학적인 모니터링을 통해 양질의 자료를 수집하고 분석하여야 할 것으로 사료된다.
휴대폰 접속 기능을 포함한 블루투스 오디오 게이트웨이 및 헤드셋
정중수 ( J. S. Chung ),정태윤 ( T. Y. Chung ),정광욱 ( K. W. Jung ) 한국정보처리학회 2004 정보처리학회논문지 C : 정보통신,정보보안 Vol.11 No.4
This paper presents the implementation of the bluetooth headset and the audio gateway connected to the mobile phone in the embedded environment. The bluetooth module includes the BC02 processor chip, the BCSP02 firmware and the bluelab software including bluetooth protocol stack. The above components in the bluetooth module developed at CSR company are used as the development environment. The application program using API functions supported by bluelab is coded by C language and loaded on the flash ROM of the bluetooth module. The call processing capacity measuring the call setup time and the clearing time between the audio gateway and the headset is considered as the performance parameter of the developed systems. As a call setup and clearing time between the audio gateway and the headset is about 88.8ms, the call processing capacity is about 11 calls per second. Therefore the performance result is satisfied in the aspect of the call processing time.
송도선(D. S. Song),정인수(I. S. Jung),정중수(J. S. Chung),정광욱(K. W. Jung) 한국정보기술학회 2010 Proceedings of KIIT Conference Vol.2010 No.-
본 논문에서는 교육용 WiMAX 시스템의 소프트웨를 설계, 구현하고자 한다. 구현하는 소프트웨어에서는 기지국과 단말간 채널 액세스 브로드캐스팅 메시지를 구성하고 초기 레인징을 실현을 포함한다. 기지국과 단말의 교육용 초기 레인징 소프트웨어 설계시 프로세서를 PPC405로/Montavister Linux를 운영체제로, 컴파일 및 디버깅을 DevRocket로, 개발언어를 C로 채택한다. 개발한 소프트웨어는 WiMAX장비의 초기 레이징을 위한 RNG-REQ, RNG-RSP MAC 메시지의 디코딩 코드의 개발을 실현하여 복잡하고 어려운 WiMAX의 초기 레인징을 초보자들이 잘 이해하고 응용할 수 있다. In this paper, the educational software of WiMAX system is presented. The software includes initial ranging and hannel access roadcast messaging between a terminal and a base station. In the design of initial ranging software we dopted the PPC405 as processor, Montavister linux as OS(Operating System), DevRocket as compiler and debugging ool, and C-language as basic development language tool. Especial1y, the designed software can be useful1y applied for ser to decode and design other systems.
송도선(D. S. Song),정중수(J. S. Chung),정광욱(K. W. Jung) 한국정보기술학회 2009 Proceedings of KIIT Conference Vol.2009 No.-
본 논문은 교육용 WiMAX 시스템개발의 소프트웨어에 관한 것으로 기지국과 단말간 채널 액세스 브로드 캐스팅 메시지을 구성하고 초기 레인징을 실현하였다. 기지국과 단말의 교육용 소프트웨어 설계시 프로세서를 PPC405로, Montavister linux를 운영체제로, 컴파일 및 디버깅을 DevRocket로, 개발언어를 C로 채택하였다, WiMAX 메시지 종류중 특히 DL-MAP, UL-MAP, DCD, UCD MAC 메시지를 디코딩하고 실현하여 복잡하고 어려운 WiMAX의 브로드캐스팅 메시지을 이해하고 응용할수 있도록 소프트웨어를 설계하였다. In this paper, the educational software of WiMAX system about channel access broadcast message between the terminal and the base station is presented. PPC405 as processor, OS(Operating System) as Montavister linux, DevRocket as compiler and debugging tool, and C-language are used for development environment. Especially, DL-MAP, UL-MAP, DCD, UCD MAC message about broadcasting type among WiMAX messages is decoded and designed for user to apply the designed software.
정중수(J. S. Chung),정광욱(K. W. Jung),송도선(D. S. Song) 한국정보기술학회 2006 한국정보기술학회논문지 Vol.4 No.3
This paper presents the development of RFID educational system based on using 13.56MHz air interface between the reader and the tag. The software of reader is developed on embedded environment and the software of PC controlling the reader is on window OS. The MC8051 VLSI chip is used for the processor of the reader of which the language is C. The visual C language is used for the PC. To verify this system, PC gets the tag's identification number through the reader and send the data to write tag memory a certain content. Finally the PC receive the data already written from the tag's memory and compare with it.
능동형 태그를 포함한 900MHz RFID 교육용 시스템의 설계
김휴찬 ( H. C. Kim ),올자스 ( A. Ohlzahas ),김종민 ( J. M. Kim ),진효석 ( H. S. Jin ),조동관 ( D. G. Cho ),정중수 ( J. S. Chung ),강오한 ( O. H. Kang ),정광욱 ( K. W. Jung ) 한국인터넷정보학회 2007 인터넷정보학회논문지 Vol.8 No.4
본 논문에서는 RFID 기술 중 리더와 태그간 900MHz 대역을 사용하여 교육용 시스템 설계를 제시하였다. 능동형 태그와 리더의 설계를 임베디드 환경에서 제시하였으며 리더와 접속 가능한 서버의 소프트웨어 개발은 PC 윈도우 운영체제 환경에서 실현하였다. 개발 환경으로는 AT89C51ED2가 리더와 태그의 프로세서로, 개발 언어는 C 언어로, 이를 제어하기 위하여 케일 C 컴파일러가 사용되었다. 서버인 PC에서는 비쥬얼 스튜디오상의 비주얼 C 언어가 사용되었다. 시스템의 기능 점검을 위하여 PC에서는 리더를 통해 태그 주소를 인지하고, 메모리에 데이터를 읽고 쓰는 기능을 첨가하여 900MHz 대역의 RFID 교육용 소프트웨어 시스템을 구성하였다. This paper presents the development of RFID educational system based on using 900MHz air interface between the reader and the active tag. The software of reader and the active tag is developed on embedded environment, and the software of PC controlling the reader is based on window OS operated as the server. The AT89C51ED2 VLSI chip is used for the processor of the reader and the active tag. As the development environment, Keil compiler is used for the reader and the active tag of which the programming language is C. The visual C language of the visual studio on the PC activated as the server is used for development language. To verify the function of the system, PC gets the tag`s identification number through the reader and send the data to write the active tag memory a certain content as "write" operation . Finally the data written from the active tag`s memory is sent to the PC via the reader as "read" operation and compare the received data with one already sent to the tag.