http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전재호 ( Jae Ho Jun ),김승구 ( Seung Goo Kim ),김도형 ( Do Hyeong Kim ),전중환 ( Joong Hwan Jun ) 대한금속재료학회 ( 구 대한금속학회 ) 2004 재료마당 Vol.17 No.6
가동온도가 800℃ 이하인 평탄형 IT-SOFC에서는 가공성 및 경제성이 우수한 금속 연결재가 적용될 전망이다. 현재 SOFC 연결재의 요구특성에 합당한 합금개발이 활발하게 진행되고 있으며, 표면 Perovskite 코팅기술이 함께 병행되고 있다. 협금개발 측면에서 살펴보면, Cr계 합금이나 Ni계 합금보다는 Ferritic FeCr합금이 우의를 차지할 것으로 보인다. 이러한 전망은 SOFC의 작동온도가 낮아지면 낮아질수록 더욱 확실하다. 그리고 합금개발의 핵심 방향은 내산회정 및 전도성을 증가시키고 Cr 증발을 방지하기 위해, Fe-Cr 합금 표면에 형성되는 Cr2O3 산화물의 성장 기구를 제어하는 것이다. 이러한 목적을 달성할 수 있는 대표적인 미량 첨가원소는 La, Y, Ce, Zr, Hf 같은 희토류 금속이다. 더 나아가 비절연성의 MnCr2O4 같은 산화물을 표면에 형성할 수 있는 합금설계가 필요하다. 한편 Perovskite coating 기술은 코팅물질, 코팅공정 및 코팅층의 조직제어 측면에서 연구가 고려되어야 한다. 무엇보다도 코팅층은 기본적으로 전자전도성, 내열응력성 및 열팽창계수 등의 특성을 만족시켜야 할 뿐 아니라, 고온의 SOFC 가동분위기에서 장시간 동안 내 구성을 유지하여야 한다.
“人能弘道 非道弘人”에 대한 非본체론적 道 이해 - 과정으로서의 道와 眞理에서 進理로 -
정강길(Jeong, Kang-gil) 영남퇴계학연구원 2021 퇴계학논집 Vol.- No.29
이 글은 『論語』의 「衛靈公」편에 언급된 “人能弘道 非道弘人”에 대한 뜻을 현대에서 새롭게 재해석한 하나의 제언이다. 특히 해석의 쟁점은 道가 사람을 크게 넓힐 수 없다고 봤던 공자의 道 이해에 있다. 이에 대한 기존 해석에선 주로 인간의 주체적 능동성과 道體의 無爲性을 내세웠지만 여전히 유학자들 사이에서도 정리되지 못한 불분명한 지점도 있어왔다. 본 글에선 우선 古注에 해당하는『論語注疏』를 비롯해 송대 신유학을 대표하는 주희의 『論語集註』 해석과 그에 맞선 反주자학적 성격의 오규 소라이의 해석 그리고 앞선 논의들을 검토한 바 있던 다산 정약용의 『論語古今註까지 대표적으로 살펴보면서 이 글은 그와 또 다른 현대의 해석을 제안해 본 것이다. 각각의 상이한 해석들이 있긴 해도 주희와 다산의 해석은 사실상 크게 다르지 않은 점도 있는데, 주희의 道體論에서도 볼 수 있듯이 기존 유학을 비롯한 동양의 道 이해에는 <본체론적인 道> 이해가 암암리에 있어왔다. 주희는 정이천의 해석을 계승해 공자의 “逝者如斯夫 不舍晝夜”를 道體로 해석했다. 이러한 <본체론적 道 이해>의 틀에서 보면 결국 儒家의 道 이해도 佛家와 道家의 체용론적 도식을 온전히 탈피하진 못하고 도리어 유사해진 것으로 남게 된다. 이 글에선 그와 달리 <본체-현상의 이원적 구도>를 폐기하고 오직 <흐름의 과정>만이 있다고 볼 뿐인, <非본체론적 道 이해>를 제안한다. 이 같은 관점에서 보면 道는 본체도 아니며 궁극적 시원이나 절대적 근거도 아닌 단지 <과정으로서의 道>일 뿐이다. 그것은 다함께 계속해서 만들어가는 길[道]이다. 따라서 “人能弘道 非道弘人”에 있어 주희의 ‘道體無爲’ 같은 해석은 불필요해진다. 왜냐하면 공자의 道 이해에선 변화하는 현상의 이면에 자리하는 어떤 <본체로서의 道>를 상정할 필요가 없이 오직 <부단한 과정들>만 있다고 보기 때문이다. 즉, 이러한 <非본체론적 道 이해>에선 천하에 道가 있기도 하고 또 없기도 한 것이다. 그럼에도 공자의 道 이해에선 상대주의의 함정에도 빠지지 않는 <非본체론적 道 이해> 역시 얼마든지 가능한 것이었고, 이것은 본체(또는 본질, 본래성)의 우위를 주장하는 기존의 진리관에 대해서도 오히려 <眞理에서 進理로의 전환>을 주장한 것으로도 볼 수 있다. 결론적으로 이 글은 공자의 道 이해를 해석함에 있어 기존 동양사상의 본체-현상의 구도에서 보는 道가 아닌 그와 또 다른 성격의 <非본체론적 道 이해>의 가능성을 모색한 것이며, 현대 사상사의 맥락에서 21세기 유학의 지형적 스펙트럼을 좀 더 넓게 확장하려는 작업의 일환으로 시도된 것이다. This article attempts to explain of In-nyung-hong-do Bi-do-hong-in(人能弘道 非道弘人) that Confucius claimed in the Analects. In-nyung-hong-do Bi-do-hong-in(人能弘道 非道弘人) means ‘people can develop the Dao(道) while the way cannot develop people.’ In the history of the Confucian philosophy, there have been various interpretations of this phrase in the Analects. Specifically, about Bi-do-hong-in(非道弘人), Zhu-xi(朱熹) interpreted this phrase as Do-che-mu-wi(道體無爲). This means that the Dao is inactive and people are active. Then, what is the Do-che(道體) that Zhu-xi claimed? On the other hand, the Analects has the following phrases; “Seo-za-yeo-sa-bu Bul-sa-zu-ya(逝者如斯夫 不舍晝夜).” This is what Confucius said standing by a stream. It passes on just like this, not ceasing day or night! Here, Zhu-xi interpreted Confucius words as Do-che(道體). In the hermeneutic framework of Zhuzi s thought(朱子學), Dao is understood under of Substantialism(本體論) perspective. Zhu-xi believes that eternal Dao lies behind the changing phenomenon. Zhu-xi regarded it as substance(本體). In other words, Zhu-xi understands the world with a dual schematic of the Dao as substance and phenomenon as change. But, Confucius only sees this as a passing process. Confucius view of Dao is far from a substantive outlook. Dao of Confucius is processive and pluralistic. It is Dao in the Making with all everybody . This does not assume dual schematic of substance-phenomenon. Therefore, Confucius understanding of the Dao originally is different from Zhu-xi. This article argues that Confucius understanding of the Dao is basically non-Substantialism perspective. Confucius seeks to understand the progressive truth(Jin-ri, 進理) by making it together, not the eternal truth(眞理) . Many truths claim to be eternal and immutable truths. In practice, what is called truth can advance or regress our lives. Among them is the truth that regresses our lives. In this article, it called Te-ri(退理). Confucius said, “To make a mistake and not correct it: this is a real mistake.” Even truth can lead to many mistake and tragedy. Confucius focus is on improving it better. In this article, it called Jin-ri(進理). For this reason, Confucius understanding of the Dao also overcomes the limitations of relativism. In conclusion, this article suggests that Confucius view of the Dao is non- Substantialism perspective, and in the making.
전재호(Jun, Jaeho),최영재(Choi, Youngjae),전중환(Jun, Joonghwan),김선태(Kim, Seontae),김성완(Kim, Seongwan) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.11
지금까지 연료전지 시스템의 효율을 극대화시키기 위한 기술들이 개발되어 왔는데, 대표적인 방법은 CHP(Combined Heat & power)와 FCT(Fuel cell & Turbine) Hybrid 시스템이다. 그러나 본 연구의 기술은 연료전지 배열을 이용한 Coanda 공기증폭기를 장착한 새로운 개념의 고효율 연료전지 시스템이다. 원래 공기 증폭기는 완만한 곡면 주위를 흐르는 유체가 곡면의 표면을 따라 흐름의 방향이 바뀌는 원리(Coanda Effect)를 이용한 장치로서, 소량의 고압유체를 구동 에너지원으로 사용하여 최고 20배에 해당하는 많은 양의 주변 유체를 빠른 속도로 이송시키는 역할을 한다. 문제는 고압의 유체원을 만드는 것인데, 본 연구에서는 발전용 연료전지 시스템의 배기가스를 활용하여 먼저 고압의 수증기를 발생시키고, 다음으로 고압의 수증기를 공기 증폭기의 구동원으로 사용함으로써 연료전지 시스템의 Air blower를 대체하는 것이다. 이러한 개념을 검증하기 위해서 고압의 스팀작동 Coanda 공기증폭기를 제작하여 선행실험을 진행하였다. 먼저 공기증폭기의 Gap 및 스팀압력에 따른 공기유량, 압력 등의 기본특성을 조사하였고, 출력 공기의 특성을 개선하기 공기증폭기의 형상 및 재료를 새롭게 설계하였다. 그리고 실제 시스템의 적용가능성을 알아보기 위해서, 예로 300kW급 용융탄산염 연료전지 발전시스템의 Air blower 대체가능성을 확인하였고, 배열이용 Coanda 공기증폭기를 활용한 고효율 연료전지 시스템의 개념설계를 수립하였다. 결론적으로 본 기술을 활용하면 연료전지 시스템의 최종 전기효율을 향상시킬 뿐 아니라는 시스템의 장기 신뢰성을 증대시키는 효과를 기대할 수 있다.
Narrow Gap 맞대기 TIG 용접에서 생산성 향상을 위한 연구
전재호(Jae-Ho Jun),김성률(Sung-Ryul Kim),조상명(Sang-Myung Cho) 대한용접·접합학회 2016 대한용접·접합학회지 Vol.34 No.1
Adoption of narrow gap welding shall be increased for the butt joint of thick plate, because the deformation and welding cost is reduced by decrease of cross-sectional area. However, sometimes narrow gap causes defects such as lack of fusion since it has small groove angle and narrow groove width. Therefore, GMAW, GTAW and SAW process shall be adopted to narrow gap welding with small bead hight and low deposition rate. In this study, Super-TIG welding using C-type strip was applied to semi-narrow gap butt joint in order to increase the welding productivity. High deposition rate 10kg/hr was obtained by high current 600A without undercut, humping bead and other welding defects. Measuring the mean and standard deviation of the melting depth to evaluate the developed processes, the fusion line type was determined by measuring the difference between maximum and minium melting depth. Furthermore, a model on arch fusion line and linear fusion line was suggested in order to prevent LF on groove wall in narrow gap butt welding.