http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
분석/합성 구조의 저 전송률 변환여기 광대역 음성/오디오 부호화기 설계
장성훈,홍기봉,이인성,Jang, Sunghoon,Hong, Kibong,Lee, Insung 한국음향학회 2012 韓國音響學會誌 Vol.31 No.7
본 논문은 음성과 오디오의 혼합 콘텐츠를 대상으로 하는 9.2 kbps 저 전송률 변환여기 부호화기 설계를 목표로 한다. 저 전송률 환경을 위하여 주파수 영역 신호의 중요도에 따른 Band-Selection 방법과 Gain-Shape 양자화를 이용한 Analysis by Synthesis(AbS) 구조를 이용한다. AbS 구조를 이용하는 과정에서 발생하게 되는 연산량을 감소시키기 위하여 밴드별 IDFT를 취하고 합성하는 방법을 이용한다. 전송 되지 않는 구간에 대하여 Comfort Noise를 삽입함으로써 음질 저하 없이 설계한다. 기존의 TCX모드와 비교하여 저 전송률에서 성능의 저하 없는 부호화기를 제안한다. This paper is aimed to design 9.2 kbps low bits late transform excitation coder that target to voice and audio signal. To set up low bit rate, we used Band-selection in frequency domain and gain-shape quantization and AbS structure. To decrease lots of calculation from ABS structure, we used each band IDFT and synthesis. And we designed non-transfer band for performance by inserting comfort noise. We propose coder that has low bit rate and similar performance comparing with original 10.4 kbps AMR-WB+ TCX mode.
SBR을 이용한 주파수 밴드선택 여기 선형예측 광대역 음성/오디오 부호화
장성훈,이인성,Jang, Sunghoon,Lee, Insung 한국음향학회 2013 韓國音響學會誌 Vol.32 No.6
본 논문은 컴포트 노이즈(comfort noise)를 이용하는 주파수 밴드선택 음성/오디오 코덱에서 컴포트 노이즈 대신 SBR(Spectral Band Replication) 기술을 이용하여 여기 신호를 대체 함으로서 밴드 선택 광대역 음성/오디오 부호화기의 성능 향상을 목표로 한다. 비 전송 밴드에 SBR 기술로 합성된 신호를 삽입하기 위하여 부밴드 별로 전송된 신호를 활용하며, 각각의 부밴드 별로 에너지 가중치를 설정한다. 백색잡음 성분의 컴포트 노이즈 대신 전송신호에 의존하는 신호를 합성 함으로서 보다 높은 음질의 밴드 선택 부호화기를 제안하였다. This paper is aimed to improve performance of Band-Selection speech/audio Coder reconstucted band spectrum that is not sent by the comfort noise. To improve the performance, we use the Spectral Band Replication(SBR) technique instead of substitution of Comfort noise. To synthesize SBR signal, the SBR algorithm is referenced in selected signals and the spectrum synthesized by SBR is injected to non-selected band. Each sub-band spectrum has been energy-weighted by real audio signal. We propose the enhanced the Band-Selection Coder that utilizes synthesized SBR signal from selected signal instead of comfort noise.
승객 수요 패턴과 역세권의 토지이용 특성을 반영한 도시철도역 첨두시간 집중률 산정 - 서울시를 대상으로 -
장성훈,김효승,이청원,김동규,Jang, Sunghoon,Kim, Hyo-Seung,Lee, Chungwon,Kim, Dong-Kyu 대한토목학회 2013 대한토목학회논문집 Vol.33 No.4
본 연구는 역사의 승객수요 패턴과 토지이용 특성을 반영하여 도시철도역 승객의 첨두시간 집중률을 산정하는 방법론을 제시하는 것을 목적으로 한다. 이를 위하여 요인분석과 군집분석을 기반으로 서울시 도시철도 역사를 3개의 그룹으로 분류한다. 각 그룹별로 이용수요의 첨두시간 집중률과 함께 도시철도 승객수요 패턴과 역사의 토지이용과 관련한 5가지 변수와 4가지 변수를 각각 산출한다. 통계 검정을 기반으로, 이 변수들 중 일평균 승객수와 업무 LQ지수가 역사의 그룹을 구분하는 기준으로 선정된다. 두 변수들을 활용하여 새로 건설되는 도시철도역의 첨두시간 집중률을 추정하기 위한 그룹할당과정을 제시한다. 13개의 도시철도역 자료를 이용한 검증을 통해 본 연구의 방법론은 현재 이용되는 지침에 비하여 더 적은 오차를 산출할 수 있다는 것을 확인하였다. 본 연구의 방법론은 신규 철도역사의 효율적인 건설 및 운영계획 수립에 기여할 수 있을 것으로 사료된다. The aim of this study is to suggest a methodology for calculating the peak-hour ratio of passengers at urban railway stations by reflecting the characteristics of passenger demand patterns and the land use inventory of stations. To achieve this, urban railway stations in Seoul are divided into three groups by using factor analysis and cluster analysis. For each station group, we calculate five and four variables related to the passenger demand patterns and the land use inventory of stations, respectively, as well as the peak-hour ratios of passengers. Among these nine variables, average daily passengers and the location quotient (LQ) index for business services are selected as the classification criteria for station groups based on statistical tests. Using the two variables, a group allocation process is suggested to estimate the peak-hour ratio of passengers for a newly-constructed station. Evaluation results based on thirteen stations show that the proposed methodology produces lower errors than the currently-used guideline does. The results of this study contribute to establishing efficiently construction and operation plans for newly-constructed stations.
이중 변환 믹서 방식 역지향 배열 안테나 시스템의 반사 전자기파 상쇄 응용
하정제(Jungje Ha),장성훈(Sunghoon Jang),이용식(Yongshik Lee) 한국전자파학회 2013 한국전자파학회논문지 Vol.24 No.12
본 논문에서는 역지향 배열 안테나 시스템을 제안하고, 이를 기반으로 대응 신호를 발생시켜 전자기파를 능동적으로 상쇄할 수 있는 가능성에 대하여 알아보았다. 제안한 시스템은 전자기파가 입사할 경우 입사 방향에 대한 사전 지식이 없더라도 입사 방향으로 신호를 발생시켜 송신할 수 있다. 이를 레이더 전자기파 상쇄에 응용할 경우, 물체에 반사되어 레이더로 되돌아 가는 반사 신호의 진행 방향과 같은 방향으로 대응 신호를 송신하여 상쇄시킬 수 있다. 이때 상쇄 효과를 최대화하기 위해서는 역지향 배열 안테나 시스템의 입력과 출력 사이의 높은 격리도가 필수적이다. 본 연구에서는 이를 위해 이중 변환 믹서 방식의 시스템을 제안하였다. 주파수가 동일한 믹서의 입출력 신호 사이에 높은 격리도를 확보하여 시스템에서 발생된 신호의 송신 방향과 레이더 신호의 입사 방향 사이의 오차를 최소화시킴으로써 반사 신호 억제 효율을 극대화할 수 있다. 실험적 검증을 위해 이중 변환 믹서 방식 2×2 역지향 배열 안테나 시스템을 설계, 제작하여 사각 금속판과 원통에 대하여 반사파상쇄 실험을 수행하였다. 최대 29 dB까지 반사파가 감소되는 결과를 얻음으로써 제안된 방법의 유효성을 확인하였다. In this paper, a retrodirective anatenna array system is proposed and the possibility of actively cancelling electromagnetic waves based on this system is investigated. When a rectrodirective array system receives an electromagnetic wave, it can send waves in the direction of the incoming signal without prior knowledge of the direction. In applications to cancellation of radar signals, the system can generate and send signals to the radar so that it cancels the radar signals that are reflected back to the radar. In such a system, isolation between the input and output ports is a key factor that determines the effectiveness of cancellation. In this work, a dual-conversion mixer system is proposed to maximize the isolation. Since this minimizes the difference between the direction of reflection of radar signals and the transmission of cancellation signals, the effectiveness of cancellation is maximized. Experimental results for a metallic plate and metallic cylinder shows as much as 29-dB reduction in reflection for a 2×2 retrodirective array based on proposed dual-conversion mixer system, which verifies the proposed method of active cancellation.
탈부착 타입 굴삭기 원격조작 키트와 5G기반 저지연 영상전송 모듈을 이용한 장거리용 지뢰 제거 시스템에 관한 연구
길명수(Myeongsu Gil),장성훈(Sunghoon Jang),박진철(Jincheol Park),현덕수(Ducksoo Hyun),이종성(Jongsung Lee),유보현(Bo-Hyun Ryu),정상혁(Jeong Sang Hyeok),이원승(Won Seung Lee),한창수(Chang-Soo Han) 대한기계학회 2018 대한기계학회 춘추학술대회 Vol.2018 No.12
As the idea of making the DMZ a peace zone has been implemented by the Panmunjeom Declaration of Apr. 27, the South-North Korea Military Talks of June 14, and each working meeting, discussions about the landmine removal work have been resumed. It is estimated that the mines on the Korean peninsula have about 1.27 million piles in the South DMZ and about 800,000 piles in the DMZ in the North MDL. Due to floods, typhoons and landslides, it is also distributed to civilian residential areas. These mines resulted in about 66 explosion from 2001 to 2016, and 89 casualties were caused by these accidents. Therefore, the mine removal system developed in Korea such as ROBHAZ, 4-legged Robot Mine Detector, and HUMIR, as well as imported equipment such as Rhiono, MK-4, Mine-Breaker, and bullet-proof excavator and dozer were put into mine removal work. However, it was judged to by unsuitable for carrying out forest and mountain terrestrial DMZ. In this paper, we propose a mid/long distance mine removal system using a detachable excavator remote control kit and a 5G-based low latency image transmission module. The proposed mine removal system can be applied to various types of excavators and it can be expected to improve the operation efficiency through real-time image transmission.
탈부착 타입 굴삭기 원격조작 키트와 5G 기반 저지연 영상전송 모듈을 이용한 장거리용 지뢰 제거 시스템에 관한 연구
길명수(Myeongsu Gil),장성훈(Sunghoon Jang),박진철(Jincheol Park),김형준(Hyung Jun Kim),현효원(Hyowon Hyun),유보현(Bo-Hyun Ryu),정상혁(Sang Hyeok Jeong),문현기(Hyungi Moon),선동익(Dong Ik Sun),이상근(Sang Keun Lee),노준규(Joon Kyu No) 대한기계학회 2019 大韓機械學會論文集A Vol.43 No.10
‘4.27 판문점 선언’, ‘6.14 남북장성급군사회담’ 및 각 실무회담까지 비무장지대(DMZ)의 평화지대화 구상이 실제화 됨에 따라 선행 작업으로 지뢰 제거 작업에 대한 논의가 재개되고 있다. 한반도에서 지뢰는 DMZ에 약 200만 발 정도가 매설된 것으로 추정하고 있으며 홍수, 태풍, 산사태 등에 의해 주변의 민간인 주거지역까지 분포되고 있다. 이러한 지뢰에 의해 2001년부터 2016년까지 약 66건의 지뢰사고와 이로 인해 89명의 인명 피해가 발생했다. 이에 국내의 ROBHAZ, 견마로봇, HUMIR 그리고 해외의 Rhino, MK-4, Mine-Breaker 등의 지뢰 제거 시스템이 투입되었으나 산림, 산악 지형 위주의 DMZ 지역전반을 수행하기에 부적합한 것으로 판단되었다. 이에 본 논문에서는 탈부착 타입의 굴삭기 원격조작 키트와 5G 기반 저지연 영상전송 모듈을 적용한 중/장거리용 지뢰 제거 시스템을 제안한다. The proposal to make the demilitarized zone (DMZ) a peace zone has been implemented by the Panmumjeom Declaration of April 27, 2018, during the South-North Korea Military Talks on June 14, 2018. Discussions on landmine removal work have also resumed. It is estimated that the mines have about 2 million piles in the DMZ. Due to floods, typhoons, and landslides, it is also distributed to civilian residential areas. These mines have caused 89 casualties from 2001 to 2016. Therefore, mine-clearing systems such as ROBHAZ, four-legged Robot Mine Detector, Rhiono, MK-4, and Mine-Breaker were put to work. However, these systems are not suitable for the forested and mountainous terrain of the DMZ. In this paper, we propose a mine-clearing system that uses an excavator remote control kit and a 5G-based low-latency image transmission module.