http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
승객 수요 패턴과 역세권의 토지이용 특성을 반영한 도시철도역 첨두시간 집중률 산정 - 서울시를 대상으로 -
장성훈,김효승,이청원,김동규,Jang, Sunghoon,Kim, Hyo-Seung,Lee, Chungwon,Kim, Dong-Kyu 대한토목학회 2013 대한토목학회논문집 Vol.33 No.4
본 연구는 역사의 승객수요 패턴과 토지이용 특성을 반영하여 도시철도역 승객의 첨두시간 집중률을 산정하는 방법론을 제시하는 것을 목적으로 한다. 이를 위하여 요인분석과 군집분석을 기반으로 서울시 도시철도 역사를 3개의 그룹으로 분류한다. 각 그룹별로 이용수요의 첨두시간 집중률과 함께 도시철도 승객수요 패턴과 역사의 토지이용과 관련한 5가지 변수와 4가지 변수를 각각 산출한다. 통계 검정을 기반으로, 이 변수들 중 일평균 승객수와 업무 LQ지수가 역사의 그룹을 구분하는 기준으로 선정된다. 두 변수들을 활용하여 새로 건설되는 도시철도역의 첨두시간 집중률을 추정하기 위한 그룹할당과정을 제시한다. 13개의 도시철도역 자료를 이용한 검증을 통해 본 연구의 방법론은 현재 이용되는 지침에 비하여 더 적은 오차를 산출할 수 있다는 것을 확인하였다. 본 연구의 방법론은 신규 철도역사의 효율적인 건설 및 운영계획 수립에 기여할 수 있을 것으로 사료된다. The aim of this study is to suggest a methodology for calculating the peak-hour ratio of passengers at urban railway stations by reflecting the characteristics of passenger demand patterns and the land use inventory of stations. To achieve this, urban railway stations in Seoul are divided into three groups by using factor analysis and cluster analysis. For each station group, we calculate five and four variables related to the passenger demand patterns and the land use inventory of stations, respectively, as well as the peak-hour ratios of passengers. Among these nine variables, average daily passengers and the location quotient (LQ) index for business services are selected as the classification criteria for station groups based on statistical tests. Using the two variables, a group allocation process is suggested to estimate the peak-hour ratio of passengers for a newly-constructed station. Evaluation results based on thirteen stations show that the proposed methodology produces lower errors than the currently-used guideline does. The results of this study contribute to establishing efficiently construction and operation plans for newly-constructed stations.
분석/합성 구조의 저 전송률 변환여기 광대역 음성/오디오 부호화기 설계
장성훈,홍기봉,이인성,Jang, Sunghoon,Hong, Kibong,Lee, Insung 한국음향학회 2012 韓國音響學會誌 Vol.31 No.7
본 논문은 음성과 오디오의 혼합 콘텐츠를 대상으로 하는 9.2 kbps 저 전송률 변환여기 부호화기 설계를 목표로 한다. 저 전송률 환경을 위하여 주파수 영역 신호의 중요도에 따른 Band-Selection 방법과 Gain-Shape 양자화를 이용한 Analysis by Synthesis(AbS) 구조를 이용한다. AbS 구조를 이용하는 과정에서 발생하게 되는 연산량을 감소시키기 위하여 밴드별 IDFT를 취하고 합성하는 방법을 이용한다. 전송 되지 않는 구간에 대하여 Comfort Noise를 삽입함으로써 음질 저하 없이 설계한다. 기존의 TCX모드와 비교하여 저 전송률에서 성능의 저하 없는 부호화기를 제안한다. This paper is aimed to design 9.2 kbps low bits late transform excitation coder that target to voice and audio signal. To set up low bit rate, we used Band-selection in frequency domain and gain-shape quantization and AbS structure. To decrease lots of calculation from ABS structure, we used each band IDFT and synthesis. And we designed non-transfer band for performance by inserting comfort noise. We propose coder that has low bit rate and similar performance comparing with original 10.4 kbps AMR-WB+ TCX mode.
SBR을 이용한 주파수 밴드선택 여기 선형예측 광대역 음성/오디오 부호화
장성훈,이인성,Jang, Sunghoon,Lee, Insung 한국음향학회 2013 韓國音響學會誌 Vol.32 No.6
본 논문은 컴포트 노이즈(comfort noise)를 이용하는 주파수 밴드선택 음성/오디오 코덱에서 컴포트 노이즈 대신 SBR(Spectral Band Replication) 기술을 이용하여 여기 신호를 대체 함으로서 밴드 선택 광대역 음성/오디오 부호화기의 성능 향상을 목표로 한다. 비 전송 밴드에 SBR 기술로 합성된 신호를 삽입하기 위하여 부밴드 별로 전송된 신호를 활용하며, 각각의 부밴드 별로 에너지 가중치를 설정한다. 백색잡음 성분의 컴포트 노이즈 대신 전송신호에 의존하는 신호를 합성 함으로서 보다 높은 음질의 밴드 선택 부호화기를 제안하였다. This paper is aimed to improve performance of Band-Selection speech/audio Coder reconstucted band spectrum that is not sent by the comfort noise. To improve the performance, we use the Spectral Band Replication(SBR) technique instead of substitution of Comfort noise. To synthesize SBR signal, the SBR algorithm is referenced in selected signals and the spectrum synthesized by SBR is injected to non-selected band. Each sub-band spectrum has been energy-weighted by real audio signal. We propose the enhanced the Band-Selection Coder that utilizes synthesized SBR signal from selected signal instead of comfort noise.
박막형 압전재료 3203HD의 재료 비선형성을 고려한 바이모프 보 작동기의 비선형 유한 요소해석
장성훈(Sung-Hoon Jang),김영성(Young Sung Kim),이상기(Sang-Ki Lee),박훈철(Hoon Cheol Park),윤광준(Kwang Joon Yoon) 한국항공우주학회 2004 韓國航空宇宙學會誌 Vol.32 No.4
본 논문에서는 고 전압, 고 응력 하에 있는 압전 재료의 재료 비선형 거동을 실험적으로 밝히고, 수치적으로 모사하였다. 응력 하에서, 압전 재료의 비선형 거동을 표현 할 수 있는 실험식을 압전 변형율에서 만들어 내었다. 그 식은 재료 비선형 해석을 위하여, 충분 형태의 유한요소 식에 적용되었다. 압전 상수에 대한 새로운 정의와 중분 형태로 표현된 압전변형율이 보다 나은 비선형 거동의 복원을 위하여 유한 요소 정식화과정에 적용 되었다. 이것으로, 높은 전기장 영역에서도, 박판형 압전 재료의 비선형 거동을 정확하게 복원 하였다. 일련의 수행된 실험과 연구 과정의 검증을 위하여, 압전재료 바이모프 보 작동기가 수치적으로와 실험적으로 사용되었다. 재료 비선형 유한요소해석으로 예측된 변위와 실험으로 구해진 변위가 잘 일치함을 확인하였다. In this paper, material non-linear behavior of PZT wafer(3203HD, CTS) under high electric field and stress is experimentally investigated and the non-linearity of the PZT wafer is numerically simulated. Empirical functions that can represent the non-linear behavior of the PZT wafer have been extracted based on the measured piezo-strain under stress. The functions are implemented in an incremental finite element formulation for material non-linear analysis. New definition of the piezoelectric constant and the incremental strain are incorporated into the finite element formulation for a better reproduction of the non-linear behavior. With the new definition of the incremental piezo-strain, the measured non-linear behavior of the PZT wafer has been accurately reproduced even for high electric field. For validation of the measured non-linear characteristics and the proposed approach, a PZT bimorph beam actuator has been numerically and experimentally tested. The predicted actuation displacement, based on the material nonlinear finite element analysis, showed a good agreement with the measured one.
돼지고기 고급육 생산을 위한 농장경영 전략 -종돈선발 및 최적교배 방안 모색을 통한-
장성훈 ( Seong Hun Jang ),김정일 ( Jung Il Kim ),김기현 ( Ki Hyun Kim ),최승철 ( Seung Churl Choi ) 한국축산경영학회,농업정책학회(구 한국축산경영학회) 2011 농업경영정책연구 Vol.38 No.3
Pork industry so far has been focused on growth performance (meat quantity) rather than improvement in meat quality for producing high quality meat. To improve the current meat quality in pork, only the terminal sire is being considered without consideration on F1 breeding sow, since there is technical problems. This study is to survey swine farms and test the performance by breeds to know how to produce high quality pork by using the scientific selection of a breeding pig and the optimal breeding method. Through producing high quality pork, the aim is to allow swine farms to be increased income and consumers to be grown utility. As a result, the most important factor in quality of pork is marbling, and 90% of swine farms have intention of additionally paying for excellent breeding pig. As a result of experimentation, performed targeting Yorkshire, Duroc, and sex on crossbred pigs, the carcass characteristics of Duroc is coincided with general common sense.