http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
영상기반 모션센싱을 이용한 실시간 동적 보행하중의 위치인식
임정혁(Lim, Jeonghyeok),윤형철(Yoon, Hyungchul) 한국방재학회 2019 한국방재학회논문집 Vol.19 No.7
본 연구에서는 구조물 건전성 모니터링(Structural Health Monitoring)을 위한 동적 하중 분석에 있어, 하중의 위치정보 획득에 영상 기법을 활용한 모션센싱 기법을 제시하고자 한다. 거동 측정 기반 구조물 건전성 모니터링은 구조물에 가해지는 동적 하중은 대부분 백색 소음(White Noise)으로 가정하고 동적 거동만을 측정하는데 이로 인하여 오차가 발생하게 된다. 반면에 하중-거동 측정 기반 구조물 건전성 모니터링은 구조물에 가해지는 동적 하중을 고려하기 위해 하중의 크기와 위치에 대한 정보를 필요로 하지만 이를 측정하는데 많은 어려움을 겪고 있다. 일반적으로 해머(Hammer) 등을 활용한 충격 재하 실험방법이 많이 사용되지만, 이 방법은 별도의 장비가 필요하며 교통 제어도 요구되는 한계점을 지니고 있다. 본 연구에서는 편리하고 경제적인 영상 기반 기법을 개발하여, 보다 저렴하고 효율적으로 구조물의 동적 보도하중의 위치를 예측하고자 한다. 카메라와 모션센싱 기법을 이용하여 구조물 위에서 움직이는 객체를 추적하고 구조물의 해당 위치에 하중을 부여하였다. 본 연구에서 개발된 동적하중 위치 측정 방법은 특별한 장비를 필요로 하지 않으며, 상용 카메라를 이용함으로써 보다 적은 비용으로 효율적인 동적 하중의 위치정보 획득이 가능할 것으로 기대된다. This paper presents a new method for analyzing the dynamic loading of a structure for structural health monitoring (SHM) using a computer-vision-based motion-sensing technique that obtains the pedestrian dynamic-load location. One of the main sources of error in the output-only SHM method comes from the assumption that the input (dynamic load) is white noise. In contrast, the input-output-based SHM method is rarely used because of the difficulty in measuring the dynamic load applied to the structure. Impact-load testing by employing an impact hammer is often used to control the dynamic load; however, the method requires additional pieces of equipment with traffic control. This paper presents a commercial off-the-shelf method to overcome such limitations using computer-vision techniques. The location of the pedestrian dynamic load is determined by applying motion-sensing algorithms. The proposed method does not require any additional equipment other than a commercial camera, which is cost- and labor-effective compared with conventional methods.
Rule-based 모델링 방법을 이용한 Product Configuration 에 서 CSP 해결 프로세스
임정혁 ( Chounghyuck Lim ),정현준 ( Hyunjun Jung ),백두권 ( Doo-kwon Baik ) 한국정보처리학회 2012 한국정보처리학회 학술대회논문집 Vol.19 No.2
현대 산업 발전에 따라 대량 생산 체제에서 소비자 개별 주문 요건을 반영하여 생산하는 대량맞춤 생산(Mass Customization) 체제로 변화해가고 있다. 이런 대량맞춤 생산 체제의 제품구성(Product Configuration) 시에 나타나는 CSP(Constraint Satisfaction Problem) 해결 방법론을 제시하고 있다. 기존방법에서는 복잡 다양한 제약조건을 수학적으로 표현하여 제약 조건 검사에서 소요시간과 검색 공간을 최소화 할 수 있는 알고리즘이 제시했다. 그런데 소비자의 주문 요건들이 빠르게 변화되고 복잡 다양 해지고 있다. 그래서 대상 모델 및 제약조건이 변경이 되었을 경우 기존 방법에서 제시하고 있는 CSP 해결에서는 수정 관리 하기가 쉽지 않고 확장성이 낮다. 본 연구에서는 룰 기반 모델링으로 CSP 문제 해결 프로세스 정립을 하여 관리의 편리성을 제공하고 확장성을 향상시킨다.
중,일 군사적 충돌 발생 시에 대비한 한국의 안보 전략 연구
임정혁 ( Jung Hyuck Lim ) 미래군사학회 2014 한국군사학논총 Vol.3 No.1
Territory is every country``s living foundation and source land for ``forever``. It is territorial issue that people always have aware of valuable land. Territorial dispute of North-East Asia seems to be an avoidable issue and phenomenon in near future. Now, the collusion has been progressing between China and Japan for Sangaku Island and military collusion now is unavoidable. So, Korea where have been experiencing territorial conflict with Japan over Dokdo Island need to carefully analyze Sangaku Island dispute. The reason is that Sangaku Island is the two countries`` (China and Japan) target for winning East-Asia after United States of America. To exclusion of national sentiment, both China and Japan never can give up Sangaku Island. Therefore, this conflict possibly leads to war at the sea. Korea needs to keep a eye on the problems and conflict between China and Japan. Also, The Korea needs to prepare for appearing multilateral security corporation organization through diplomatic and military effort that aims at supervising and solving dominium problems of this area. Korean government needs to prepare military and diplomatic strategies for solving maritime dispute of East-Asia, including Dokdo Island. In this 21st century, the age of endless maritime competition, The Korea requires the ocean sovereignty and protection of rights for surviving and prosperity. Especially, The Korea needs to make an effort to solve demarcation problem and territorial problem peacefully. In conclusion, keeping true peace and territory holding is very important. But also, The Korea, we need to try to have strong relation with America and need to build national security and diplomatic capacity.
자동차용 엔진 쿨링 팬 모터 PWM 제어기의 수명 해석을 위한 가속 시험법 개발
임정혁(Jeong-hyeok Lim),신민경(Min-gyung Shin),이상훈(Sang-hoon Lee),박상욱(Sang-wook Park),이영수(Young-soo Lee),손정현(Jeong-hyun Son),한덕호(Duck-ho Han) 한국자동차공학회 2017 한국자동차공학회 학술대회 및 전시회 Vol.2017 No.11
In order to assess the reliability of the cooling fan motor PWM controller for automobiles, accelerated life test model and procedure are developed. By using this method, failure mechanism and life distribution are analyzed. The main results are as follows; 1) the main failure mechanism is degradation failure that is, capacity degradation of a capacitor by high temperature. 2) the life distribution of the PWM controller is fitted well to Weibull life distribution and the accelerated life model of that is fitted well to Arrhenius model. 3) at the result of the life distribution, accelerated life test method is developed, and test time for life assessment will be shortened by 5,200hours by this test method.
그래핀과 실세스키옥세인을 포함한 팔라듐 나노입자와의 나노복합체 제조
임정혁(Jung Hyurk Lim),고일웅(Yl Woong Ko),김기영(Ki Young Kim),김경민(Kyung Min Kim) 한국고분자학회 2012 폴리머 Vol.36 No.5
케이지 구조의 POSS-NH3 +를 이용하여 팔라듐 입자들의 자기 조직화로 인한 구조가 제어된 Pd-POSS 나노입자를 제조하였다. 또한 흑연을 강산과 산화제를 이용하여 산화된 그래핀 옥사이드(GO)를 합성한 후 얻어진 GO와 NaBH4와의 반응을 통하여 그래핀을 제조하였다. 합성된 그래핀과 acrylic acid와 라디칼 중합 반응을 통하여 그래핀 표면에 poly(acrylic acid)(PAA)가 결합된 PAA-grafted graphene을 얻었다. Pd-POSS와 PAA-grafted graphene을 이용한 나노복합체는 POSS-NH3 +로 인하여 양전하를 띠는 Pd-POSS 나노입자와 PAA로 인하여 음전하를 띠는 PAAgrafted graphene와의 정전기적 인력을 이용하여 제조하였다. Pd-POSS 나노입자가 PAA로 치환된 그래핀 표면에 정전기적 인력으로 결합되어 있고, 나노복합체의 열적 안정성은 PAA와 PAA-grafted graphene 보다 우수한 것을 확인 할 수 있었다. 제조된 Pd-POSS/PAA-grafted graphene 나노복합체의 구조 및 형태와 열적 안정성은 FE-SEM, AFM, TEM, EDX, FTIR과 TGA를 통하여 분석하였다. The palladium nanoparticles were self-assembled to make Pd-POSS using POSS-NH3 + (polyhedral oligomeric silsesquioxane) as a crosslinker. Graphene oxide (GO) was produced by the reaction of graphite under a strong acid and oxidizer and poly(acrylic acid) (PAA) was covalently grafted on the surface of graphene to make PAA-grafted graphene through the radical polymerization of acrylic acid and GO along with a reduction process under NaBH4. The nanocomposites of Pd-POSS and PAA-grafted graphene were fabricated via ionic interactions between positively charged Pd- POSS and negatively charged PAA-grafted graphene. Pd-POSS nanoparticles were attached to the surface of PAA-grafted graphene through ionic interactions. The thermal stability of Pd-POSS/PAA-grafted graphene was higher than that of PAA and PAA-grafted graphene. The composition, structure, surface morphology, and thermal stability of the Pd-POSS/ PAA-grafted graphene were studied by FE-SEM, AFM, TEM, FTIR, and TGA.