http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임순재,최만용 한국산업안전학회 1997 한국안전학회지 Vol.12 No.4
미캐니컬 씰은 회전축에 장착되는 밀봉장치의 하나로써 많은 산업 현장에서 사용되고 있다. 산업발전과 더불어 미캐니컬 씰의 고장 즉, 밀봉장치에서의 누설, 크랙, 파손, 과대마멸 등과 같은 이상 상태는 대규모 공장의 생산라인을 정지시키거나 심각한 환경오염을 유발시키는 등 경제, 사회적 문제를 야기시키고 있다. 미캐니컬 씰 밀봉면의 미끄럼 운동상태를 인지하고, 미캐니컬 씰의 고장에 대한 감시인자를 도출하기 위하여 미끄럼 마멸실험을 수행하였다. 미캐니컬 씰의 회전속도를 1750 rpm 으로 하여, 매 10분 마다 미캐니컬 씰 밀봉면의 마멸상태를 광학헌미경으로 관찰하였고, 실험동안에 미캐너컬 씰의 미끄럼 운동면에서의 음향방출(AE : Acoustic Emission), 토크, 온도, 등을 측정하였으며, 실시간으로 토크 신호의 주파수 분석을 실시하였다. 각 실험의 초기를 제외하고는 전 구간에서 음향방출 신호의 크기와 토크 값의 변화 경향이 대체로 유사한 경향을 보였다. 정상상태에서는 음향방출, 토크 및 온도가 안정된 상태를 유지하였으나 이상상태에서는 음향방출의 크기와 토크값이 안정된 상태를 유지하지 못하였으며, 온도는 이상상태 때 급상승하는 경향을 보였다. 토크 값과 온도의 변화가 미캐니컬 씰의 고장에 대한 장기적 감시인자로 적절하다고 생각되며, 미캐니컬 씰의 순간적인 이상상태를 확인하거나 미캐니컬 씰의 운동상태를 인지하는 데는 실효치 진압 상태의 음향방출 신호가 적당하다고 생각된다. 온도는 이상상태 감시 시스템에서 시스템의 신뢰도를 증진시키는 병렬요소로써 활용될 수 있을 것이다. The mechanical seals, which are installed in rotating machines like pump and compressor, are generally used as sealing devices in the many fields of industries. The failure of mechanical seals such as leakage, crack, breakage, fast and severe wear, excessive torque, and squeaking results in big problems. To identify abnormal phenomena on mechanical seals and to propose the proper monitoring parameter for the failure of mechanical seals, sliding wear experiments were conducted. Acoustic emission, torque, and temperature were measured during experiments. Optical microstructure was observed for the wear processing after every 10 minute sliding at rotation speed of 1750 rpm and scanning electron microscopy was also observed. Except for the initial part of every experiment, the variation of acoustic emission was well coincided with torque variation during the experiments. This study concludes that acoustic emission and torque are proper monitoring parameters for the failure of mechanical seals. The intensity of acoustic emission signals is measured in root mean square voltage. Temperature of sealing face will be used as a parallel parameter for increasing the reliability of monitoring system.
김대원,김모곤,남동환,정순기,임순재 한국센서학회 2000 센서학회지 Vol.9 No.1
Every object emits some energy from its surface. The emission energy forms surface heat distribution which we can capture by using an infrared thermal imager. The infrared thermal image may include valuable information regarding to the subsurface anomaly of the object. Since a thermal image reflects surface clutter and subsurface anomaly, we have difficulty in extracting the information on the subsurface anomaly only with thermal images taken under a wavelength. Thus, we use visible wavelength images of the object surface to remove exterior clutter. We, therefore in this paper, visualize the infrared image for overlaying it with a visible wavelength image. First, we make an interpolated image from two ordinary images taken from both sides of an infrared sensor. Next, we overlay the intermediate image with an infrared image taken from the infrared camera. The technique suggested in this paper can be utilized for analyzing the infrared images on non-destructive inspection against disaster and for safety.