http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
FFT를 이용한 주파수 영역의 RVDT 센서 오차 보상
이창수,Lee, Chang-Su 한국전기전자학회 2012 전기전자학회논문지 Vol.16 No.3
본 논문에서는 FFT 영역을 이용한 새로운 RVDT 인코더의 위상 오차 보상 방법을 제시하였다. 최소 개수의 보상 저항의 조합으로 오차를 측정하고 FFT 변환 후 1차 하모닉 성분의 저항에 따른 계수의 변화를 구하였다. 또한 삽입 저항과 계수의 크기가 반비례 관계에 있음을 알아냈다. 이 방법은 기존의 시간 영역에서의 보상에 비해 테이블을 구하는데 드는 시간이 단축되고 테이블의 크기를 획기적으로 줄일 수 있었다. 또한 축변환을 통해 보상 저항의 위치도 정확히 찾을 수 있었으며 첨두간 위상 오차값을 0.57도 정도로 2배 가까이 개선하였다. This paper proposes new phase error compensation method of RVDT encoder in the FFT domain. Phase errors are measured with a small combination of compensation resistors and the changes of first order coefficients of FFT for each resistor are obtained. It is found that the coefficient change is inversely proportional to the inserted resistor. The proposed method takes less time and the size of the table is smaller than previous time domain approaches. In addition, the location of the compensation resistor can be found through axis transformation of the coefficients. Finally, the peak-to-peak phase error was improved to 0.57 which is two times better than previous one.
이창수,Lee, Chang Su 한국전기전자학회 2015 전기전자학회논문지 Vol.19 No.3
Recently a demand for high precision absolute position transducer is increasing in order to control thickness in steel industry. LVDT (linear variable differential transformer) is widely used to measure the absolute position in the linearly moving cylinder under poor factory environment. In this paper we implement the three phase LVDT with a high resolution of one micron and L/D (LVDT to digital) converter. First we designed U, V, and W three phase signaling using FPGA. Second a pulse output algorithm is designed for position information with A and B phase waveforms. Finally the performance is compared with previous sensors. Experiments show that the linearity deviation error is 0.009788 [mm] and the average sinusoidal THD is 0.0751%, which means 2.2% and 33% more improved result than the previous sensors respectively. 최근 들어 철강의 두께 제어를 위해 고정밀도의 절대 위치 검출 센서에 대한 필요성은 증가하고 있다. 열악한 공장 환경 하에서 직선 운동하는 실린더의 절대 위치를 측정하기 위해서는 LVDT가 널리 사용된다. 본 논문에서는 1 미크론의 고해상도를 가지는 3상 LVDT 및 L/D (LVDT to digital) 변환기를 구현하였다. 이를 위하여 첫째 U, V, W 3상 정현파에 대한 시그널링을 FPGA로 설계하였다. 둘째 위치 정보에 대한 A상, B상 펄스 파형 출력 알고리즘을 구현하였다. 마지막으로 성능 평가를 위하여 기존의 센서들과 비교하였다. 실험 결과 직선성 편이 오차는 0.009788 [mm] 로써 2.2% 향상된 결과를 얻었고 정현파의 왜곡률은 평균 0.0751%로 기존보다 33%의 향상된 결과를 얻어 우수한 센서임을 입증하였다.
수정(修正)된 Jones모형(模型)을 이용(利用)한 한국(韓國)의 성장요인(成長要因) 분해(分解)
이창수,Lee, Chang-Su 한국개발연구원 1999 KDI Journal of Economic Policy (KDI JEP) Vol.21 No.2
Romer류의 내생적 성장모형과 신고전학파의 성장모형을 통합한 Jones(1997, 1998a)에 의하면 장기균형성장요인의 기여도가 예상보다 작고 여러 단기요인의 성장기여도가 큰 것으로 나타났다. 본고에서는 기술이용능력과 모방노력의 개념을 도입하여 Jones모형을 수정하고 이를 이용하여 한국의 성장요인을 분해한다. 이에 따르면 대GDP 투자비중, 연구인력비율 및 취업자 교육연수의 증가 등 이행경로상의 단기요인이 지난 30년간의 노동생산성 증가의 78%를 설명하고 있으며 균형성장경로 요인의 기여도는 22%에 지나지 않는다. 자본축적의 뒤를 이어 R&D 투자 등 새 단기요인의 역할이 증대되면서 우리나라의 경제성장률이 크게 하락하지 않을 것으로 예상된다.