http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최동호,나호성,이지엽,권순길,Choi, Dong-Ho,Na, Ho-Sung,Yi, Ji-Yop,Gwon, Sun-Gil 한국강구조학회 2011 韓國鋼構造學會 論文集 Vol.23 No.6
다경간 현수교란 3개 이상의 주탑을 가지는 현수교로 중앙부에 주 경간을 2개 이상 가지는 현수교이다. 다경간 현수교 설계시 중앙주탑과 측주탑의 적절한 강성비를 가지도록 설계하는 것이 경제성이나 구조적인 효율성 측면에서 중요하다. 본 연구는 다경간 현수교의 중앙주탑과 측주탑의 적절한 강성비를 찾기 위해 다경간 현수교의 거동을 용이하게 파악할 수 있는 간편한 방법을 제안하는 것을 목적으로 하고 있다. 그 방법으로 다경간 현수교의 주케이블을 등가의 케이블 스프링으로 이상화하고, 주케이블에 작용하는 장력을 주탑상단에 수평력과 수직력의 외력으로 치환시키는 방법으로 다경간 현수교를 등가 다경간 현수교 모델로 치환하였다. 등가 다경간 현수교 모델에 대한 평형방정식을 유도하고 비선형해석을 통해 방정식의 해를 구하였다. 중앙지간장 3,000m의 4경간 현수교의 FEM 해석을 통해 각 주탑에서 발생하는 변위와 모멘트 반력을 계산하고, 이 결과를 등가 4경간 현수교 모델의 해석결과와 비교하여 본 연구의 연구결과를 검증하였다. 검증 결과, 본 연구의 제안방법은 FEM 해석결과와 비슷한 경향을 나타내었다. The multi-span suspension bridge generally has more than three towers and two main spans. To economically and effectively design a multi-span suspension bridge, the proper stiffness ratio of the center tower to the side tower must be determined. This study was conducted to propose a method of figuring out briefly the structural behavior of the towers in a multi-span suspension bridge. In the equivalent suspension bridge model, the main cable of the multi-span suspension bridge is idealized as an equivalent cable spring, and the external loads of horizontal and vertical forces that were calculated using the tensile forces of the main cable were applied on top of the towers. The equilibrium equations of the equivalent multi-span suspension bridge model were derived and the equations were solved via nonlinear analysis. To verify the proposed method, a sample four-span suspension bridge with a main span length of 3,000 m was analyzed using thefinite element method. The displacements and moment reactions of each tower in the proposed method were compared with the FEM analysis results. Consequently, the results of the analysis of the equivalent suspension bridge model tended to be consistent with the results of the FEM analysis.
조경식(Kyeong-Sik Cho),안기업(Ki-up An),이지엽(Ji-Yop Yi),곽종원(Jong-Won Kwark),곽임종(Im-Jong Kwahk) 한국철도학회 2015 한국철도학회 학술발표대회논문집 Vol.2015 No.10
철도교에서 가장 많이 사용되는 교량 형식으로는 PSC 박스 거더교를 꼽을 수 있다. 특히 현재까지 건설된 고속 철도교의 경우 PSC 박스 거더교가 90% 이상을 차지하고 있다. 그렇기 때문에 PSC박스 거더교를 최적 설계할 경우 국가 SOC 사업 비용을 절감하는 효과를 도출할 수 있다. 국내에서는 비교적 최근에 설계된 호남고속철도의 경우 과거에 비하여 많은 부분 최적설계가 이루어졌다. 하지만 2013년도 철도 설계 기준이 개정되었기 때문에 이를 적용한 최적 설계가 필요하다. 최근에 설계된 국내외의 PSC박스 거더교를 조사분석하고 이를 반영하여 PSC박스 거더교의 최적설계를 수행한 결과 주요 물량을 상당부분 절감하는 결과를 도출하였다. 이에 따른 경제성 향상도 기대 할 수 있을 것으로 사료된다. PSC box girder have been very widely used as type of rail road. PSC box girder have been very widely used as type of girder. Especially, high-speed railroad bridges in Korea have been constructed in PSC box girder type over 90% up to now. So, if PSC box girder is designed economically, the fund for SOC projects can be decreased. It’s designed more economical then predecessor that Honam high speed railway girder is designed recently as PSC box girder in Korea. But it need to be newly optimal design. Because train load changed from HL-25 into KRL-2012 and criteria of dynamic behavior design changed in accordance with change of Design Criteria for Railroad in 2013. Therefore I made an investigation into recent PSC box girder for railroad bridges and analyzed it. And then I designed the PSC box girder reflecting it. As a result I got the result reduced main resources of PSC box girder.