Validations of a Numerical Model of Solute Transport in a Snowpack

이정훈,Lee, Jeonghoon The Korean Society of Economic and Environmental G 2012 자원환경지질 Vol.45 No.5

겨울철동안 쌓여 봄에 놓은 눈 녹은 물(snowmelt), 즉 융설의 유출은 북반구 및 산간지역에서 매우 중요한 것으로 여겨지고 있다. 이러한 지역에서 융설로 인한 유동 및 이온의 이동에 대한 이해는 매우 중요하며 전세계적으로 꾸준하게 연구되고 있다. Lee et al. (2008a)와 Lee et al. (2008b)연구에서는 대기로부터 수송된 이온 및 오염원이 융설에 의해 눈속을 이동하는 것을 모사하기 위한 Mobile-Immobile water Model (MIM)을 개발하였다. 이 연구에 사용된 모델을 검증하기 위해서 물질수지계산(mass balance calculation) 및 해석해(analytical solution)를 이용한 모델결과와의 비교를 수행하였다. 일정시간동안 눈 속에서의 물질의 질량변화는 눈 표면에서 들어온 물질과 눈 기저부에서 빠져나간 물질의 질량 차이와 같아야한다는 사실을 이용하여 물질수지를 계산하였다. 파면(wave front)의 이동속도 및 기존문헌에서 알려진 해석 해를 이용하여 모델결과와의 비교도 시도하였다. 모델의 물질수지계산결과 질량 차이가 거의 발생하지 않았으며 모델결과와 해석해와의 비교 역시 두 결과가 거의 일치하였다. Snowmelt from seasonal snow covers can be significant in many environments of northern and alpine areas. Water flow and chemical transport resulting from snowmelt have been studied for an understanding of contributions to watersheds or catchments. A Mobile-Immobile water Model (MIM) was developed to describe the movement of ionic tracers through a snowpack by Lee et al. (2008a) and Lee et al. (2008b). To validate the model used in the studies, mass balance calculations of the model were conducted and comparisons were made between model results and analytical solutions in this work. Mass balance was calculated based on the fact that change in total mass within a snowpack with time is equal to sum of any change in the flux of water or ionic tracers into and out of the snowpack. Calculations of both water and ionic mass show almost perfect agreement between changes of two water and solute mass fluxes. Comparisons between model results and analytical solutions including wave velocity and effective saturation show almost perfect agreement.

홀로그래픽 고분자 분산 액정을 이용한 홀로그램 이중 초점 렌즈 제작

이정훈,성기영,이상조,김기현,조영걸,곽종훈,송재봉,이윤우,Lee, Jung-Hoon,Sung, Gee-Young,Lee, Sang-Jo,Kim, Ki-Hyun,Joh, Young-Gul,Kwak, Chong-Hoon,Song, Jae-Bong,Lee, Yun-Woo 한국광학회 2003 한국광학회지 Vol.14 No.2

다기능성 아크릴레이트 단량체와 네마틱 액정 등을 혼합한 홀로그래픽 고분자 분산 액정 박막을 제작하고 액정의 농도와 피부에서 인가한 교류 전기장 등에 대한 실시간 회절효율을 측정하였다. WPDLC 박막에 기록된 홀로그램은 적절한 교류 전기장의 on/off에 의해 가역적으로 소거와 재생이 가능함을 보였다. 이러한 전기광학 특성을 이용하여 30 cm와 40 cm의 이중초점을 갖는 홀로그램 렌즈를 제작하였다. We Have fabricated a holographic polymer-dispersed liquid crystal (HPDLC) thin film, which is composed of multifunctional acrylate monomer blended with the nematic liquid crystal mixture, and then investigated the real-time diffraction efficiencies for various amounts of liquid crystals and applied AC electric fields. It is experimentally shown that the holographic gratings recorded in the HPDLC film can be reversibly erased and reconstructed by switching on and off an appropriate applied AC electric field. By use of these electro-optic properties we have developed bifocal holographic lenses having two different focal lengths of 30cm and 40 cm.

추정된 일회심박출량을 이용한 수면 무호흡 검출

이정훈,이전,이효기,이경중,Lee, Junghun,Lee, Jeon,Lee, Hyo-Ki,Lee, Kyoung-Joung 대한의용생체공학회 2013 의공학회지 Vol.34 No.2

This paper proposes a new algorithm for sleep apnea detection based on stroke volume. It is very important to detect sleep apnea since it is a common and serious sleep-disordered breathing (SDB). In the previous studies, methods for sleep apnea detection using heart rate variability, airflow and blood oxygen saturation, tracheal sound have been proposed, but a method using stroke volume has not been studied. The proposed algorithm consists of detection of characteristic points in continuous blood pressure signal, estimation of stroke volume and detection of sleep apnea. To evaluate the performance of algorithm, the MIT-BIH Polysomnographic Database provided by Phsio- Net was used. As a result, the sensitivity of 85.99%, the specificity of 72.69%, and the accuracy of 84.34%, on the average were obtained. The proposed method showed comparable or higher performance compared with previous methods.

활동기준원가계산법(Actvitiy-Based Costing)에 의한 모듈러 건축물 공장제작단계 간접비 산정 방안

이정훈,박문서,이현수,이광표,현호상,Lee, JeongHoon,Park, Moonseo,Lee, Hyun-Soo,Lee, Kwang-Pyo,Hyun, Hosang 한국건설관리학회 2015 한국건설관리학회 논문집 Vol.16 No.4

최근 건설 기업들은 노동력 부족, 원자재값 상승, 건설경기 위축 등으로 인해 새로운 건설시장 개척 및 자동화 기술도입을 적극적으로 추진하고 있다. 이러한 노력의 일환으로 최근 제조업의 생산프로세스와 건설생산프로세스가 결합된 모듈러 건축공법이 부각되고 있으며 이와 관련된 연구가 활발히 진행되고 있다. 모듈러 건축프로세스에서 공장제작의 가장 큰 장점 중 하나는 기존 건축프로세스에서 사용하기 어려웠던 제조업의 생산설비시스템을 활용한 생산원가(공사원감)절감이 가능하다는 것 있다. 이를 뒷받침하기 위해서는 대다수의 건축공종이 집중되어있는 공장제작단계에서의 원가산정이 정확해야 하며 특히 직접적인 계산이 어려운 간접비에 대한 구체적인 산정방인 필요하다. 그러나 국내 모듈러 건축산업이 시장도입단계로 이와 관련된 연구가 한정적으로 이루어지고 있어 모듈러 건축물의 원가왜곡현상이 나타날 수 있는 문제가 있다. 따라서 본 연구는 모듈러 건축물의 공장제작단계에서 국내계약법상에서 명시된 제조업과 건설업에서의 간접비 정의를 고찰하고 활동기준원가계산법을 통해 모듈러 건축물을 구성하는 모듈러 유닛별 간접비 산정방식을 제시하였다. 본 연구는 공장제작단계에서의 전 과정 뿐만 아니라 모듈러 건축물의 설계, 제작, 운송, 시공의 간접비 배분에 대한 기초자료로서 활용될 수 있으며 향후 모듈러 건축물의 공장제작단계에서의 원가산정 정확도 향상 및 모듈러 건축물의 전 생애주기에 따른 원가산정방안 마련에 기여할 것으로 기대된다. Modular construction is combined with manufacturing production process and conventional construction industry technique. Considering characteristic of modular construction production process, manufacturing facilities require indirect costs for utilities, equipment, and overall maintenance, which can affect modular units pricing. However, current modular construction cost classification is inadvertent to reflect the manufacturing overhead costs, because it is generally added as a percentage to sum of labor, material and equipment as it called in single cost pool used. This process is easy to estimate the total construction cost at the project starting points, but it brings on misunderstanding of project profit estimations by "cross subsidization phenomenon". To prevent this situation, in this research aims to provide modular construction overhead cost handling process at the detailed indirect cost calculation for manufacturing stage using Activity-Based Costing as one of the powerful method for overhead costs estimation and allocation. Using this research results, modular construction cost estimators have more detailed cost information of modular units and prevent to misallocate indirect costs. Also, it can be utilized to aid the understanding of the company's profit structure.

동공 산동제와 축동제가 섬유주세포에 미치는 영향

이정훈,김재우.Jeong Hun Lee. MD. Jae Woo Kim. MD. PhD 대한안과학회 2011 대한안과학회지 Vol.52 No.9

Purpose: To investigate the effects of pupil dilation and constriction agents on the survival and production of nitric oxide (NO) in cultured human trabecular meshwork cells (HTMC). Methods: Primarily cultured HTMC were exposed to 0, 0.01, and 0.1 mg/ml of tropicamide, cyclopentolate, atropine, or pilocarpine for 2 hours. Cellular survival and production of NO were assessed using the MTT assay and Griess assay, respectively. Results: Tropicamide, cyclopentolate, atropine, and pilocarpine decreased cellular survival at the concentration of 0.1 mg. At the concentration of 0.01 mg/ml, all agents decreased production of NO to some extent, although the reduction was not statistically significant. Conclusions: Pupil dilation and constriction agents may be toxic to HTMC if used at high concentrations or if used frequently in the short-term but may not affect trabecular outflow. J Korean Ophthalmol Soc 2011;52(9):1089-1093

A Study on Acquisition of Direct Sequence Spread Spectrum Signal Using Non-coherent Digital Correlator

이정훈,이충웅,Lee, Jung Hoon,Lee, Choong Woong The Institute of Electronics and Information Engin 1987 전자공학회논문지 Vol.24 No.1

In this paper, the acquisition performance of a receiver that utilizes a non-coherent digital correlator is analyzed. In order to analyze the acquisition performance, the probability density function of a receiver output random variable has been derived approximately. Using this function, the acquisition performance of the coarse acquisition code receiver in a global positioning system is analyzed.

스노우팩-융설 계산을 위한 에너지수지 알고리즘

이정훈,고경석,Lee, Jeong-Hoon,Ko, Kyung-Seok 한국지하수토양환경학회 2011 지하수토양환경 Vol.16 No.5

Understanding snowmelt movement to the watershed is crucial for both climate change and hydrological studies because the snowmelt is a significant component of groundwater and surface runoff in temperature area. In this work, a new energy balance budget algorithm has been developed for melting snow from a snowpack at the Central Sierra Snow Laboratory (CSSL) in California, US. Using two sets of experiments, artificial rain-on-snow experiments and observations of diel variations, carried out in the winter of 2002 and 2003, we investigate how to calculate the amount of snowmelt from the snowpack using radiation energy and air temperature. To address the effect of air temperature, we calculate the integrated daily solar radiation energy input, and the integrated discharge of snowmelt under the snowpack and the energy required to generate such an amount of meltwater. The difference between the two is the excess (or deficit) energy input and we compare this energy to the average daily temperature. The resulting empirical relationship is used to calculate the instantaneous snowmelt rate in the model used by Lee et al. (2008a; 2010), in addition to the net-short radiation. If for a given 10 minute interval, the energy obtained by the melt calculation is negative, then no melt is generated. The input energy from the sun is considered to be used to increase the temperature of the snowpack. Positive energy is used for melting snow for the 10-minute interval. Using this energy budget algorithm, we optimize the intrinsic permeability of the snowpack for the two sets of experiments using one-dimensional water percolation model, which are $52.5{\times}10^{-10}m^2$ and $75{\times}10^{-10}m^2$ for the artificial rain-on-snow experiments and observations of diel variation, respectively.

PECVD법에 의해 제조된 SnO₂ 박막의 공정변수에 따른 미세구조 및 특성

이정훈,장건익,손상희,Lee, Jeong-Hoon,Jang, Gun-Eik,Son, Sang-Hee 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.7

Tin oxide$(SnO_2)$ thin films were prepared on glass substrate by Plasma Enhanced Chemical Vapor Deposition (PECVD) method. $SnO_2$ thin films were prepared using gas mixture of dibutyltin diacetate as a precursor and oxygen as an oxidant at 275, 325, 375, $425^{\circ}C$, respectively as a function of deposition temperature. The XRD peaks corresponded to those of polycrystalline $SnO_2$, which is in the tetragonal system with a rutil-type structure. As the deposition temperature increased, the texture plane of $SnO_2$ changed from (200) plane to denser (211) and (110) planes. Lower deposition temperature and shorter deposition time led to decreasing surface roughness and electrical resistivity of the formed thin films at $325\sim425^{\circ}C$. The properties of $SnO_2$ films were critically affected by deposition temperature and time.

고도 가중 방법을 이용한 레이더 반사도의 합성

이정훈,정성화,허복행,김경익,Lee, Jung-Hoon,Jung, Sung-Hwa,Heo, Bok-Haeng,Kim, Kyung-Eak 대한원격탐사학회 2010 大韓遠隔探査學會誌 Vol.26 No.4

두 대의 레이더를 이용하여 반사도를 합성할 때 중복영역을 처리하는 새로운 합성 방법을 개발하였다. 이 합성 방법은 인접한 두 레이더의 중복되는 영역의 반사도 차이를 보정한 후 가중치를 주어 합성하는 방법이다. 가중치는 CAPPI(Constant Altitude PPI) 고도와 반사도가 관측된 고도와의 차이의 비를 역으로 계산한 것이다. 이 합성방법의 결과를 분석하기 위하여 두 레이더를 이용하여 관측한 태풍 사례의 반사도장에 대해 다른 합성방법(최댓값, 평균값, 근거리, 거리 가중)과 비교하였다. 두 레이더의 중복영역의 경계지점들에 대해 반사도의 연속성과 치우침을 분석하였고 그 결과 새로운 방법이 다른 합성방법에 비해 더 우수한 결과를 얻었다. A new method to mosaic reflectivity over the overlapped coverage of two radars was developed. The method mosaics the radar reflectivity with weights after adjustment of reflectivity differences on overlapped coverage of neighboring two radars. Their weights are inverse proportion to the difference between the height of an interpolated reflectivity and the level of CAPPI (Constant Altitude PPI). The performance of this method was compared to different mosaic methods (Mosaics by maximum value, averaged value, nearest value and distance weighted value) using the reflectivity fields of a typhoon event observed by two radar. New method was better than any other methods either as a continuity and as a bias analysis of reflectivity at the boundaries in overlapped coverage by two radars.

경비행기의 비행특성 분석 및 준경험적 분석 방법 비교

이정훈,Lee, Jung-hoon 항공우주시스템공학회 2022 항공우주시스템공학회지 Vol.16 No.3

In this study, for development of the MDO (Multi Disciplinary Optimization) framework, the flight dynamic characteristic parameters of the ChangGong-91, a light aircraft, were extracted by an analytical method based on various semi-empirical methods, and the flight test method was compared and evaluated. The semi-empirical analysis methods for comparative subjects were the Perkins method, McCormick method, and Smetana method. The major stability/control derivatives and dynamic factors were calculated, using each method. As the comparison criteria, the flight test derivative estimates and dynamic factors were processed, using the output error method. Additionally, the flight characteristics of the light aircraft were analyzed and evaluated according to the provisions of the Korean Airworthiness Standard (KAS) of the Ministry of Land, Infrastructure and Transport, and MIL-F-8785C for the U.S. military.