http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
미기록 귀화식물: Plantago aristata (Plantaginaceae)
이정호,한동욱,이은주,박종욱,Lee, Jungho,Han, Dong Uk,Lee, Eun Ju,Park, Chong-Wook The Korean Society of Plant Taxonomists 2005 식물 분류학회지 Vol.35 No.2
절경이과의 Plantago aristata Michx.(국명신칭: 긴포꽃질경이)가 경기도 고양시 한강하구에 자라고 있는 것으로 처음 확인되었다. 이 귀화식물은 선형인 잎(길이 9-20 cm, 폭 5-8 mm), 긴 선형의 포(길이 약 2.5 cm), 큰 흰꽃(직경 4-6 mm)으로 다른 한반도 질경이속 식물들과 구별된다. 북미 원산인 본 종은 인근 국가인 일본과 중국에도 유입되어 퍼져나가고 있는 것으로 보고되어 있다. 확증표본은 서울대학교 석엽표본관(SNU)에 소장하였다. We reported that an alien species of Plantaginaceae, Plantago aristata Michx. from North America, grows at the Han-River estuary in Go-Yang City, Kyunggi Province. This species is easily distinguished from others in Korea by its linear leaves, cylindrical spikes with long linear bracts at base, and relatively large flowers of ca. 4-6 mm in diameter. We called the species as gin-po-ggot-jil-kyung-i as a local name. Plantago aristata is known to be very invasive and has been already introduced to Japan and China.
Vernier 신호 분석에서 자기상관함수 기반의 후처리를 이용한 주파수선 음향징표 특징 강화
이정호,배건성,Lee, Jungho,Bae, Keunsung 한국정보통신학회 2013 한국정보통신학회논문지 Vol.17 No.3
본 연구에서는 수동소나 신호의 분석에서 얻어지는 토널 성분, 즉, 주파수선의 하모닉 성분을 강화하는 새로운 방법을 제안하였다. 제안한 방법에서는, 먼저 스펙트럼의 일정 시간에 따른 주파수 빈별 평균값을 구하고, 평균값과의 차이를 이용하여 안정적인 주파수선과 불안정한 주파수선을 구별한다. 그런 다음 불안정한 주파수선에 자기상관함수와 S2PM을 적용하여 배경잡음을 줄이고 하모닉 성분을 강조하게 된다. 실제 어선에서 획득한 수중음향 데이터를 이용한 실험 결과를 분석하였고, 이를 통해 제안한 방법의 타당성을 검증하였다. In this paper, we propose a novel method to enhance the harmonic components from the frequency lines of the passive sonar signals. For this, we first separate the stable frequency lines from unstable ones using mean and difference of spectral bins in the vernier analysis. Then we emphasize the harmonic components using autocorrelation-based postprocessing, and enhance them by reducing the background noise with the split-window two pass mean algorithm. Experimental results for real underwater acoustic data are presented with our discussions.
한국형발사체 75톤급 엔진 지상연소시험설비 연료시스템 인증시험
이정호(Jungho Lee),전준수(Junsu Jeon),유병일(Byungil Yoo),김채형(Chaehyoung Kim),이광진(Kwangjin Lee),김승한(Seunghan Kim),한영민(Yeoungmin Han) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.5
한국형발사체의 1단/2단에 사용되는 75톤급 액체로켓엔진의 연소시험을 위한 엔진 지상연소시험설비가 나로우주센터 내에 구축되었다. 엔진 지상연소시험 설비의 추진제 공급 시스템 중 하나인 연료공급 시스템의 구성 및 운영에 대해 기술하고, 설비의 공급성능을 확인하기 위해 수행한 공급 성능 인증 시험결과를 확인하였다. 정격 유량 시험에서 102 liters/sec 의 유량이 안정적으로 공급되고, 설비최대 조건인 고유량 조건에서는 123 liters/sec 의 유량이 안정적으로 공급되었다. 또한 시동탱크/런탱크 전환 공급 시험을 통하여 시동탱크/런탱크 전환 시에도 연료가 정격 값으로 원활히 공급되는 것을 확인하였으며, 전환 시 유량의 떨림 정도를 확인하였다. 75-tonf rocket engine ground test facility for propulsion system of KSLV-II 1st/2nd stage is constructed in Naro space center. The specification and operation of kerosene supply system and the result of cold flow test to verify its performance are described in this paper. At the rated flow rate condition the flow rate is measured as 102 liters/sec and which is measured as 123 liters/sec at the high flow rate condition. Also the cold flow test for verifying switching performance from the start tank to the runtank was conducted.
이정호(Jungho Lee),오동욱(Dong-Wook Oh),도규형(Kyu Hyung Do),김태훈(Tae Hoon Kim) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.11
The actual demand on more accurate heat flux measurement has increased in water cooling of hot steel plate in steelmaking industry. To improve a spatial resolution of heat flux measurement, the multi-point heat flux measurement is developed by an empirical technique. The corresponding heat flux can be determined by Fourier’s law in a conventional way. The multi-point heat flux gauge developed in this study can be also applicable to measure the surface heat flux, the surface heat transfer coefficient during water cooling and/or quenching process for hot coil, plate, and wire-rod. The results exhibit different boiling heat transfer regimes; such as single-phase forced convection, nucleate boiling, and film boiling, that are occurred in close proximity on the multi-point heat flux gauge quenched by water cooling.
카트리지 히터를 이용한 고온 강판의 수냉 열유속 측정 연구
이정호(Jungho Lee),박상진(Sang-Jin Park) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.5
Conventional hot steel cooling experiments were carried out to heat up a hot steel plate using an electric muffle furnace in which heating method was needed for much consuming time, money, and experimental difficulties. In this study, the local heat flux measurements were introduced by a novel experimental technique in which cartridge heaters were used to achieve the heat flux on surface of the hot steel plate. The local heat fluxes on top and bottom surface were provided by an inverse heat conduction formulation using a sequential function specification method. Additionally, the time resolved heat transfer characteristics for a water impinging jet were also introduced for better understanding of high-temperature steel plate cooling.