RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        생체분자와 필드의 동시국소화를 통한 플라스몬 센서의 감도향상 연구

        이원주,오영진,김동현,Lee, Won-Ju,Oh, Young-Jin,Kim, Dong-Hyun 한국광학회 2011 한국광학회지 Vol.22 No.4

        본 논문에서는 국소화된 플라스몬 필드 내에 분자를 동시국소화 시키는 방법으로 플라스몬 센서의 감도를 향상시키기 위한 이론적 연구를 수행하였다. 플라스몬 필드의 국소화는 나노격자를 통하여 이루어 졌으며, 측정하고자 하는 분자 반응은 유전체 박막의 기울임 증착을 통하여 국소화되는 것으로 가정하였다. 근접장 기반의 필드와 분자 분포 간의 중복적분 값을 통하여 중복도가 플라스몬 센서의 감도와 밀접한 관련이 있는 것을 확인하였으며, 계산된 플라스몬 센서 특성에 근거하여 동시국소화된 플라스몬 센서의 경우, 동시국소화되지 않은 경우에 비하여, 10배 정도의 감도개선 효과가 있는 것을 확인하였다. We have conducted a theoretical study to improve the detection limit of a surface plasmon resonance (SPR) sensor by co-localizing plasmonic fields and target molecules of interest. The fields were localized by nanograting antennas, while target molecules that participate in a molecular interaction were assumed to be co-localized by angled evaporation of a dielectric mask layer on the nanograting antennas. We have performed the evaluation using an overlap integral between distributions of plasmon fields and molecules and confirmed the correlation of the overlap with the sensitivity of an SPR sensor. Based on the calculated sensor characteristics, it was found that the sensitivity, if the fields and molecules are co-localized, can be as much as ten times that of non-colocalized structure.

      • KCI등재

        백워드 설계를 적용한 한국 현대 가치문화 교육방안 연구

        이원주 ( Lee Wonju ) 고려대학교 한국어문교육연구소 2023 한국어문교육 Vol.43 No.-

        본 연구는 한국어 학습자를 위해 한국 현대 수필에 반영된 한국의 현대 가치문화를 백워드 설계에 적용하여 교육방안을 제시하는 데에 목적이 있다. 이를 위해 소설처럼 허구화된 인물과 복잡한 사건이 덜 등장하며 시처럼 함축적이고 상징적인 표현이 적고 일상생활을 소재로 하여 한국인의 일상과 그에 반영된 가치문화를 가까이서 간접적으로 체험하고 이해할 수 있는 수필 장르를 선택하였다. 또한 한국의 현대 가치문화를 가족주의 문화(혈연 문화, 효 문화), 집단주의 문화(우리 문화, 정 문화, 흥 문화), 관계주의 문화(서열 문화, 연줄 문화, 체면 문화)로 분류하였다. 이를 바탕으로 이어령의 수필 「빵과 밥」에 반영된 가치문화를 분석하여 백워드 설계를 적용한 교육방안을 수립하였다. 따라서 본 연구는 한국어교육 분야에서 연구가 미진했던 가치문화 연구에서 백워드 이론을 적용한 최초의 연구라는 점, 가치문화 교육과 언어 기능 교육을 연결한 교육방안을 제시했다는 점에서 의의를 갖는다. 본 연구를 시작으로 한국어교육 분야에서 한국의 가치문화를 교육하기 위한 연구와 백워드 설계를 활용한 연구들이 활발히 이루어지기를 기대한다. The purpose of this study is to present an educational plan for Korean language learners by applying Korean modern value culture reflected in modern Korean essays to the Backward Design. To this end, the essay genre was chosen as it may help understand the daily lives and value culture of Korean people. Unlike novels, essays feature fewer fictional characters and complicated events. Besides, unlike poetry, they have fewer implicit and symbolic expressions. In addition, this study classified Korean modern values into three main categories: familism, collectivism, and relationalism, and put subcategories below them. Based on this, the study analyzed the value culture reflected in Bread and Rice, a modern essay by Lee-Eolyeong, to establish an educational plan based on the Backward Design. Therefore, this study is significant because it is the first study to apply the Backward Design theory in value culture research, which has been lacking in the field of Korean language education. Also, it suggests an educational plan that connects value culture education and language skills education. With this study, it can be expected that studies in Korean value culture and studies using the Backward design may be actively conducted in the field of Korean education.

      • KCI등재

        시용질소(施用窒素)의 형태(形態)가 뽕잎 생산량(生産量) 및 이온 균형(均衡)에 미치는 영향(影響)

        이원주,유순호,Lee, Won-Chu,Yoo, Sun-Ho 한국토양비료학회 1982 한국토양비료학회지 Vol.15 No.2

        시용질소(施用窒素)의 형태(形態)가 뽕잎생산량(生産量), 질소(窒素)의 회수량(回收量) 엽중(葉中)의 각종(各種) 이온의 엽위별(葉位別) 분포(分布) 및 균형(均衡), 경시적(?時的)인 변동(?動)에 미치는 영향을 알고져 유안(硫安), 요소(尿素), $NH_4NO_3$($NO_3:NH_4$=1:1), $NaNO_3+NH_4NO_3$($NO_3:NH_4$=2:1). $NaNO_3$등 5개처리를 하여 폿트시험(試?)으로 수행(遂行)하였는 바 그 결과(結果)는 다음과 같다. 1. 유안구(硫安?)를 대조(?照)로 한 수엽량지수(收葉量指?)는 요소구(尿素?)와 1:1구(?)에서 75, 2:1구(?)에서 69, $NaNO_3$구(?)에서 67로 $NO_3$시용비율(施用比率)이 높을수록 낮았다. 2. 유안구(硫安?)를 대조(?照)로 한 질소(窒素)의 회수량지수(回收量指?)는 요소구(尿素?)에서 88, 1:1구(?)에서 78, 2:1구(?)에서 74, $NaNO_3$구(?)에서 59이었다. 3. 생육초기(生育初期)에 뽕잎중의 양(陽)이온함량(含量)은 Na<Mg<Ca<K의 순서이었으나, 생육(生育)이 진행(進行)됨에 따라 Ca함량(含量)이 증가(?加)하여 K함량(含量)을 능가(凌駕)하였다. 음(陰)이온중 $H_2PO_4$함량(含量)이 전생육기간(全生育期間)을 통(通)해 타(他) 음(陰)이온보다 높았으며, 초기(初期)에는 $SO_4<NO_3<Cl$ 이었으나 후기(後期)에는 $NO_3$와 Cl는 감소(減少)하고 $SO_4$는 증가(?加)하여 $NO_3<Cl<SO_4$의 순서로 높았다. 4. 엽위별(葉位別)로 K, $H_2PO_4$, $SO_4$, $NO_3$, 전질소(全窒素), ${\sum}A$ 등은 상위엽(上位葉)에, Ca, Mg, Cl, ${\sum}C$, (C-A)등을 하위엽(下位葉)에 높았다. 5. $NO_3$의 흡수(吸收)가 줄게되자 Cl가 K을 동반(同伴)이온으로 하여 흡수가 증가(?加)되었으며, Ca은 K의 흡수증가에 의해 흡수(吸收)가 감소(減少)되었다. 6. 뽕잎중의 ${\sum}C$는 1,100~1,200, ${\sum}A$는 300~350, (C-A)는 700~900me/kgDM사이에 분포하였으며, (C-A)는 엽위별(葉位別), 경시적(?時的)으로 변동(?動)을 보였다. Mulberry plants (Morus alba L.) were grown in pots with the following different nitrogen sources: ammonium sulphate, urea, ammonium nitrate, sodium nitrate + ammonium nitrate ($NO_3:NH_4$=2:1), and sodium nitrate. The effects of the nitrogen sources on mulberry yields, nitrogen recovery, distribution of ions and cation-anion balance (C-A) along leaf sequence and growth stage were investigated. The results were as follows: 1. Leaf yields and nitrogen recovery decreased with increasing $NO_3$-N application rates. 2. Relative cation contents in leaves in the early growth stages showed the following pattern : Na < Mg < Ca < K. However, the order of Ca and K reversed in the later stages. The order of anion contents chifted from $SO_4$ < $NO_3$ < Cl < $H_2PO_4$ in the early stages to $NO_3$ < Cl < $SO_4$ < $H_2PO_4$ in the later stages. 3. Contents of K, $H_2PO_4$, $SO_4$, $NO_3$, T-N and the sum of anion contents (${\sum}A$) were higher in upper leaves whereas Ca, Mg, Cl, the sum of cation contents (${\sum}C$) and (C-A) were higher in lower leaves. 4. When $NO_3$ in leaves decreased, Cl and K as counter-cations increased and consequently Ca decreased. 5. The (C-A) in leaves varied with leaf sequence and growth stage from 700 to 900 me/kg D.M.

      • KCI등재

        선박 디젤기관 스크러버의 기초설계에 관한 수치적 연구

        이원주,김인수,최용석,최재혁,Lee, Won-Ju,Kim, In-Su,Choi, Yong-Seok,Choi, Jae-Hyuk 해양환경안전학회 2017 해양환경안전학회지 Vol.23 No.5

        Numerical studies have been carried out on scrubbers, which are after-treatment devices to satisfy strengthened emission regulations for sulfur dioxide and particulate matter. We investigated the problems with existing scrubbers through numerical analysis and designed and analyzed a new swirl-type scrubber that could solve these problems. As a result, with the swirl-type scrubber, exhaust gas formed a vortex in the lower part of the device, and some of this gas was released along the guide vane through the bottom surface. In this case, the pressure gradient in the vertical direction was not large, but a pressure difference between the inside and outside of the baffle was generated. The shape of the exhaust gas stream was investigated, and when water was not sprayed, the exhaust gas flowed constantly to the outlet along the guide vane, in contrast to when water was sprayed. It was confirmed that the shape of the flow was influenced by the guide vane, nozzle arrangement and water pressure. In the case of the swirl-type scrubber, impact on engine back-pressure was minimal, because differential pressure at the inlet and outlet was less than half of that with a conventional scrubber. 본 연구에서는 강화되는 황산화물 및 입자상물질의 배출규제를 만족시키기 위한 후처리장치인 스크러버(scrubber)에 대한 수치해석적 연구를 수행하였다. 먼저 수치 해석을 통하여 기존 스크러버의 문제점을 파악하고, 이러한 문제점들을 개선할 수 있는 새로운 형태의 와류형 스크러버를 설계하여 분석하였다. 그 결과 와류형 스크러버에서 배기가스는 하부에서 와류를 형성하고 그 중 일부는 바닥면을 통과하여 가이드 베인을 따라 배출되는데, 이 때 수직 방향의 압력구배는 크지 않으나 배플의 내 외부에는 압력차가 발생하는 것으로 나타났다. 배기가스 유선의 형태를 확인한 결과, 물이 분사되지 않는 경우에는 물이 분사되는 경우에 비해 가이드 베인을 따라 출구까지 일정하게 유동하였으며, 유동의 형태에 가이드 베인과 노즐의 배열 및 수압 등이 영향을 미치는 것으로 확인되었다. 와류형 스크러버의 경우 입 출구의 차압이 기존의 스크러버 대비 절반 이하로서 기관의 배압에 미치는 영향이 훨씬 적은 것으로 나타났다.

      • KCI등재

        聲音의 生理 病理에 關한 文獻的 考察

        이원주,김연진,노석선,Lee, Won-Ju,Kim, Yeon-Jin,Rho, Sek-Seon 대한한방안이비인후피부과학회 1997 한방안이비인후피부과학회지 Vol.10 No.1

        A Literature study on the language disturbance, the results are as follows; 1. Utterance was closely concerned not only the vocal organs(pharynx, larynx, epiglottis, lips, tongue, vocal cord etc,) but also five viscera{especially heart, lung, kidney etc.) in The Yellow Emperor's Canon of Internal Medicine. It is very like the vocal mechanism in Medical science. 2. In the language disturbance, It is classified with dysarthria and dysphasia in Medical science. But in Oriental medicine, it is expressed the language disturbance as coma-speech lessness, stiff tongue-speechlessness, frightening-speechlessness etc. Especially in Oriental medicine, Non-utterance is called aphasia in literature study. 3. In the concern of the language disturbance and five viscera, $Heart{\cdot}Lung{\cdot}Kidney$ are counted of first importence. In differential diagnosis, It is divided sthenia-syndrome and asthenia-syndrome. Sthenia-syndrome is classified with wind-cold, fire-evil, adverseness of vital energy, stagnation of phlegm, is easy to cure. Asthenia-syndrome is classified with sexual desire, anxiety-meditation, fear, is hard to cure. 4. The pathogenesis of dysphasia originated from two factors; The first internal damages are consumption of body fluid caused by lung-dryness and yin-dificiency of lung & kidney. The second disease caused by exogenous evjls is sluggishness of lung-energy. 5. In many using points of acupuncture of the language disturbance, the order is LI-4(合谷), H-7(神門), K-l(湧泉), L-3(太衝), K-3(太谿), S-6(三陰交), H-5(通里), G-15(아門), C-23(廉泉), S-40(豊降), K-6(照海), L-7(列缺), S-36(足三里) etc.

      • KCI등재

        조임 회전력에 따른 치과 임플랜트 지대나사의 응력에 관한 연구

        이원주,임주환,조인호,Lee, Won-Joo,Lim, Ju-Hwan,Cho, In-Ho 대한치과보철학회 1998 대한치과보철학회지 Vol.36 No.5

        Abutment screw loosening of implant restorations is a common problem in the treatment of dental implant. The purpose of this study was to calculate stress and preload from the elongation measurements and to determine maximum tightening torque without plastic deformation of the screw. The length of each gold alloy UCLA screw was measured after tightening to the manufacturer's recommended torque of 32 N-cm. Similarity, titanium UCLA screws were measured after tightening to the manufacturer's recommended torque of 20 N-cm. Loosening torque was also measured after tightening to 32 N-cm torque for gold alloy abutment screws and 20 N-cm for titanium abutment screws. The results were as follows ; 1. There was a regressive relationship between screw elongation and tightening torque (gold alloy : $r^2=0.987$, titanium : $r^2=0.978$), and the mean preload calculated from elongation measurements was $501.11{\pm}26.85\;N$ (gold alloy) and $399.43{\pm}7.61\;N$ (titanium). 2. Stress calculated for the gold alloy and titanium screws at maximum recommended tightening torque was less than 60% of their respective yield strengths and with-in the elastic range. Maximum tightening torque without plastic deformation was 61 N-cm (gold alloy) and 39 N-cm (titanium). 3. For titanium screws, there was a significant difference between loosening after trial 1 and loosening after trials 2 to 5 (p<0.05). No statistically significant difference was seen in mean loosening torques between the first and subsequent trials for gold alloy screws.

      • KCI등재

        다양한 샘플링 조건에 따른 선박 배기가스 내 입자상물질의 구조 특성에 관한 실험 연구

        이원주,장세현,김성윤,강무경,천강우,조권회,윤석훈,최재혁,Lee, Won-Ju,Jang, Se-Hyun,Kim, Sung-Yoon,Kang, Mu-Kyoung,Chun, Kang-Woo,Cho, Kwon-Hae,Yoon, Seok-Hun,Choi, Jae-Hyuk 해양환경안전학회 2016 해양환경안전학회지 Vol.22 No.5

        선박용 디젤엔진 배기가스에 포함된 입자상물질(PM) 가운데서 블랙카본(BC)은 극지방의 해빙을 촉진시키고 온난화를 유발하는 원인물질로서 큰 주목을 받고 있다. 본 연구에서는 향후 예상되는 PM/BC 배출 규제에 선제적으로 대응하고, 저감기술 개발 및 실증을 위한 기초연구의 일환으로 한국해양대학교 실습선 한바다호를 이용하여 실제 운항 중에 주기관의 배기관 수 포인트에서 PM을 샘플링하여 HR-TEM을 통해 그 구조와 특성을 분석하였다. 또한 배기가스 분석기를 이용하여 운전조건별 배기가스 내 유해물질의 배출 경향을 확인하였다. 분석 결과 엔진에서 배출된 PM의 구조는 구형 입자들의 촘촘하지 않은 체인형 결합으로 이루어져 있으며, 과급기로부터 멀어질수록 온도 저하에 의한 응집이 더 많이 관찰되었고 BC 특유의 graphitic 구조를 잃어가면서 점점 amorphous 구조를 띠는 경향이 나타났다. 또한 배기가스 분석을 통해 엔진 회전수가 증가할수록 배기 내 PM의 농도는 감소할 것으로 예측되었다. Black carbon (BC) contained in particulate matter (PM) originating from the exhaust gases of ships' diesel engines has been receiving great attention as a cause of glacial melting and warming in the polar regions. In this study, we took samples from various locations of PM emitted from the training ship (T/S) HANBADA's main engine, in cooperation with the Korea Maritime and Ocean University. We analyzed the structure and characteristics of these samples using high-resolution transmission electron microscopy (HR-TEM) and applied our findings as fundamental research for developing PM reduction technology. We also employed our results to determine appropriate preemptive action to meet upcoming PM/BC regulations. In addition, we confirmed the emission trend of pollutants from exhaust gases under various engine operating conditions using an exhaust gas analyzer. Results obtained from the analysis of HR-TEM images showed that the structure of the PM is chain-like wispy agglomerates consisting of a number of individual spherical particles. As the sampling location was moved away from the turbo charger (T/C) towards the funnel, more condensates were observed at a low temperature and the molecular structure of the PM lost its characteristic BC structure as an amorphous structure gradually appeared. Furthermore, through the analysis of exhaust gases, we predicted a decrease in PM concentration in the exhaust stream as engine rpm increase.

      • KCI등재

        순차적인 사후 추정에 의한 다중 차량 추적

        이원주,윤창용,이희진,김은태,박민용,Lee, Won-Ju,Yoon, Chang-Young,Lee, Hee-Jin,Kim, Eun-Tai,Park, Mignon 대한전자공학회 2007 電子工學會論文誌-SC (System and control) Vol.44 No.1

        운전자를 위한 영상처리 시스템에서 도로 위의 움직이는 물체와 고정된 물체의 구분은 매우 중요한 문제이다. 많은 연구자들이 색상과 경계 기반의 추적 시스템은 'distracted' 현상으로 인해 잘못된 결과를 야기 시키는 데 이것은 동시에 모든 점들이 예상을 벗어난 경우에 대한 문제를 다루지 않기 때문이다. 본 논문에서는 순차적인 몬테카를로 필터를 사용하여 다중 차량 추적에 대응하며 광학적 흐름 기법의 명암 흐름과 히스토그램 기법의 색상 정보의 분포를 결합하여 실시간 시스템의 강인성과 정확성을 향상시킨다. 또한 고정된 물체의 경우 적응하는 입자 수의 밀도를 줄여 시간이 지남에 따라 추적 대상에서 제외된다. 두 개의 큰 흐름으로 나뉘는데 전자는 움직이는 물체와 고정된 물체를 구분하기 위한 예측 단계에 대하여 설명하고 후자는 센서인 영상으로부터 얻어진 정보를 측정 단계로 사용하여 겹쳐진 영역에 대응하는 방법에 대하여 논한다. In a visual driver-assistance system, separating moving objects from fixed objects are an important problem to maintain multiple hypothesis for the state. Color and edge-based tracker can often be 'distracted' causing them to track the wrong object. Many researchers have dealt with this problem by using multiple features, as it is unlikely that all will be distracted at the same time. In this paper, we improve the accuracy and robustness of real-time tracking by combining a color histogram feature with a brightness of Optical Flow-based feature under a Sequential Monte Carlo framework. And it is also excepted from Tracking as time goes on, reducing density by Adaptive Particles Number in case of the fixed object. This new framework makes two main contributions. The one is about the prediction framework which separating moving objects from fixed objects and the other is about measurement framework to get a information from the visual data under a partial occlusion.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼