미세구조에 따른 La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ 분리막의 산소투과 및 기계적 특성

이시우,이승영,이기성,우상국,김도경,Lee, Shi-Woo,Lee, Seung-Young,Lee, Kee-Sung,Woo, Sang-Kuk,Kim, Do-Kyung 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.10

고상 반응법을 통해 $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ 페롭스카이트계 산소투과 분리막을 제조하였으며, 미세구조에 따른 산소투과 특성 및 기계적 특성을 고찰하였다. 분리막의 미세구조는 소결온도 및 소결 유지시간을 달리함으로써 조절하였으며, 미세구조에 따른 평균 입경 및 상대밀도의 변화를 평가하였다. 입계 분율의 감소에 따라 산소투과유속이 증가하는 경향을 나타내었으며, 본 연구에서 고찰한 소결조건 중에서는 1300${\circ}C$에서 10시간 유지하여 제조한, 상대밀도가 높고 비교적 입경이 조대한 분리막 시편의 경우, 최대 0.37 ml/$cm^2$${\cdot}$min의 산소투과유속이 특정되었다. 파괴강도는 소결체의 상대밀도에 의존적이었으며, 파괴인성은 결정립의 크기에 따라 증가하는 경향을 나타내었다. Oxygen permeability and the mechanical properties of mixed ionic-electronic conductive $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ perovskite-type membrane, fabricated by solid state reaction, were investigated with regard to microstructure. The microstructure of the membrane was controlled by changing the sintering temperature and holding time. The average grain size and relative density were evaluated as a function of sintering conditions. As the fraction of grain boundary decreased, oxygen permeability showed a tendency to increase. Especially the maximum oxygen flux of 0.37 ml/$cm^2$${\cdot}$min was measured for the specimen sintered at 1300${\circ}C$ for 10 h, which has high density and relatively large grain size. Fracture strength was dependent on the relative density of sintered body, while fracture toughness increased with average grain size.

환자용 사상체질진단 설문지의 체질별 응답차이에 관한 연구

이시우,주종천,이수경,이혜정,장은수,Lee, Si-Woo,Joo, Jong-Cheon,Lee, Su-Kyung,Lee, Hae-Jung,Jang, Eun-Su 사상체질의학회 2007 사상체질의학회지 Vol.19 No.3

1. Objectives This study aims to evaluate newly developing Sasang Constitution Diagnosis Questionnaire for accuracy and efficiency. 2. Methods Three hundred and twenty eight patients from 4 multi centers are involved in this study. Excluding 16 constitution-unidentified patients and 2 Taeyang-in patients, 310 patients' questionnaires are analyzed statistically by their constitutions. 3. Results Sixty one questions are statistically significant in whole 229 questions of Sasang Constitution Diagnosis Questionnaire. We have selected 30 questions from 61 questions by comparing total data from 4 multi centers with those of each center. Thirty questions are made up of 10 body shape questions, 10 appearance questions, 5 character questions and 5 symptom questions. 3. Conclusions There might be needs for revision of character and symptom questions. From results, we suggest to diagnose Sasang Constitution for screening by short-form questionnaire consisted of questions on body shapes and appearances.

Dual Phase 전도성 CO₂ 분리막: 메커니즘, 미세구조 및 전기전도도

이시우,유지행,우상국,Lee, Shi-Woo,Yu, Ji-Haeng,Woo, Sang-Kuk 한국세라믹학회 2007 한국세라믹학회지 Vol.44 No.8

Novel conductive $CO_2$ membranes composed of dual phases, molten carbonates and electronic conducting ceramics, were investigated. As the microstructure control of electronic conducting ceramic supports is extremely important to keep the molten carbonates stable in the membranes by a capillary force applied by the pore structure of the supports, we have scrutinized the microstructure of the electronic conducting supports utilizing microscopic images and gas permeability measurement. From the evaluation of the electrical conductivities of the molten carbonates and the electronic conducting ceramic supports, we found that the ionic conductivity of the molten carbonates could determine $CO_2$ flux through the dual phase membranes if the surface exchange rate were relatively high enough.

[상한론(傷寒論)]의 세 가지 승기탕증(承氣湯證)에 대한 사상의학적(四象醫學的) 고찰(考察)

이시우,Lee, Si-U 사상체질의학회 1997 사상체질의학회지 Vol.9 No.1

8kbps에 있어서 PCFBD-MPC에 관한 연구

이시우,Lee, See-woo 한국인터넷정보학회 2017 인터넷정보학회논문지 Vol.18 No.5

유성음원과 무성음원을 사용하는 멀티펄스 음성부호화 방식에 있어서, 대표구간의 멀티펄스 음원을 사용하는 경우에 유성음의 합성음성파형에서 일그러짐이 나타난다. 이러한 원인은 대표구간의 멀티펄스를 피치구간마다 복원하는 과정에서 재생 음성파형이 정규화 되는 것이 원인으로 작용한다. 본 논문에서는 합성 음성파형의 일그러짐을 제어하기 위하여 V/UV/S(Voiced / Unvoiced / Silence)의 스위칭을 사용하고, 피치구간 마다 멀티펄스의 위치를 보정하며, 무성자음(Unvoiced)의 근사합성에 특정주파수를 이용하는 PCFBD-MPC(Position Compensation Frequency Band Division-Multi Pulse Coding)를 제안하였다. 또한 8kbps의 부호화 조건에서 PCFBD-MPC 시스템을 구현하고, PCFBD-MPC의 SNRseg를 평가하였다. 그 결과 PCFBD-MPC의 남자음성에서 13.8dB, 여자음성에서 13.4dB 임을 확인할 수 있었다. 향후 멀티펄스 음원의 진폭과 위치를 동시에 보정하는 8kbps 음성부호화 방식의 음질을 평가하는 연구를 수행하고자 한다. 향후, 멀티펄스 음원의 진폭과 위치를 동시에 보정하는 8kbps 음성부호화 방식의 음질을 평가하는 연구를 하고자 한다. 이러한 방법들은 셀룰러폰이나 스마트폰과 같이 낮은 비트율의 음원을 사용하여 음성신호를 부호화하는 방식에 활용할 수 있을 것으로 기대된다. In a MPC coding using excitation source of voiced and unvoiced, it would be a distortion of speech waveform. This is caused by normalization of synthesis speech waveform of voiced in the process of restoration the multi-pulses of representation section. This paper present PCFBD-MPC( Position Compensation Frequency Band Division-Multi Pulse Coding ) used V/UV/S( Voiced / Unvoiced / Silence ) switching, position compensation in a multi-pulses each pitch interval and Unvoiced approximate-synthesis by using specific frequency in order to reduce distortion of synthesis waveform. Also, I was implemented that the PCFBD-MPC( Position Compensation Frequency Band Division-Multi Pulse Coding ) system and evaluate the SNRseg of PCFBD-MPC in coding condition of 8kbps. As a result, SNRseg of PCFBD-MPC was 13.4dB for female voice and 13.8dB for male voice respectively. In the future, I will study the evaluation of the sound quality of 8kbps speech coding method that simultaneously compensation the amplitude and position of multi-pulse source. These methods are expected to be applied to a method of speech coding using sound source in a low bit rate such as a cellular phone or a smart phone.

초기질량함수(初期質量函數)

이시우,Lee, Si-U 한국천문학회 1990 天文學論叢 Vol.5 No.1

Some important problems for the bimodal initial mass function(IMF) of field stars in the solar neighborhood, the relation of the IMF of field stars with the combined IMF of open star clusters and the time-dependent IMF of young star clusters are discussed particularly by comparing their observed and computed present day mass functions.

18대 국회에 바란다-대학의 자율화 기반 구축을 위한 고등교육법 개정

이시우,Lee, Si-U 한국대학교육협의회 2008 大學敎育 Vol.154 No.-

카보퓨란 처리 방법 별 벼멸구에 대한 살충 효과 판별 최적 시기

이시우,정진교,서보윤,박창규,Lee, Siwoo,Jung, Jin Kyo,Seo, Bo Yoon,Park, Chang-Gyu 한국응용곤충학회 2017 한국응용곤충학회지 Vol.56 No.4

관주처리에 의한 벼멸구 흡즙 섭식 독성, 잎 침지처리에 의한 접촉독성과 식물체내 침투에 의한 섭식독성, 미량국소처리에 의한 표피 접촉 독성 등, 처리 방법에 따른 카보퓨란의 벼멸구에 대한 살충 작용 특성을 분석하였다. 카보퓨란 관주처리는 시간에 따른 벼멸구의 살충력 변화가 2가지 패턴으로 나타났다. 상대적으로 높은 농도(8~30 ppm)의 처리에서는 급격히 사충율이 올라가다가 시간이 지남에 따라 증가율이 낮아지는 로그곡선의 형태와 낮은 농도(1~4 ppm)의 처리에서는 사충율 증가 패턴이 S 자 모양의 곡선 형태를 보였다. 관주처리 시 높은 농도에서는 처리효과가 즉시 나타나 하루 만에 치사율이 40% 이상 도달하였으나 상대적으로 낮은 1~2 ppm의 농도에서는 처리 5일 후에야 80~100%에 달하는 사충율을 얻을 수 있었다. 침지처리는 사충율이 처리 1일 후 약효가 급격히 증가하고 이 후 증가율이 낮아졌다. 국소처리도 침지처리와 비슷한 경향을 보이나 침지처리와는 달리 처리 후 3일 이후에는 사충율이 거의 증가하지 않았다. 약효 최적 조사 시간은 관주처리에서 처리 후 2일 (42시간)이었으며 침지처리와 국소처리에서는 처리 후 1~2일이 약효 조사 적기였다. For determining the insecticidal effect of Carbofuran on the Brown planthopper, Nilaparvata lugens, sucking toxicity by drenching application, sucking and contact toxicity by leaf dipping application, and contact toxicity by topical application were examined. Drenching caused two types of mortality patterns. One was logarithmic curve at a relatively high concentration (8~30 ppm) with over 40% mortality in 24 h, and the other was an S-shaped curve at low concentrations (1~4 ppm) with over 60% mortality on the fifth day after Carbofuran treatment. Leaf dipping application caused a rapid increase in mortality in a day, and this effect decreased steadily with time. Topical application showed steep increase in mortality in a day, and hardly increased thereafter. The best mortality evaluation time for the drenching application was the second day (42 h), and that for the leaf dipping and topical applications was the first or second day after Carbofuran application. When the insecticide has systemic effects, drench application provides the best efficacy and its insecticidal effects persist for a longer time than any other application method.

제지애쉬를 혼입한 모르터의 특성에 관한 실험적 연구

이시우,Lee, Si-Woo 한국건축시공학회 2002 한국건축시공학회지 Vol.2 No.3

The purpose of this study is investigating characteristics of paper-ash mortar according to partial replacement of fine aggregate by Paper-ash. For this purpose, selected test variables were mixing ratio with two levels of mortar(1:2, 1:3), and 3 types of paper-ash(A, B, C), and paper-ash content with four levels(5%,, 10%, 15%, 20%). As a result of this study, in all mixes with partial replacement of fine aggregate by Paper-ash generally Produced Paper-ash mortar with decreased compressive strength at ail age as compared to ordinary mixes. The mixing rate 1:2 was the higher increasing rate of strength than the mixing rate 1:3. The flow value and unit weight of paper-ash mortar were decreased with increasing of the paper-ash content. And the thermal conductivity of the thermal conductivity of the paper-ash mortar was lower than normal mixing without paper-ash.

슈메이커-레비 9 혜성의 목성 충돌관측

이시우,김승리,성환경,표태수,Lee, Si-Woo,Kim, Seung-Ri,Seong, Hwan-Gyeong,Pyo, Tae-Su 한국천문학회 1995 天文學論叢 Vol.10 No.1

We observed impact spots on Jupiter which were formed by the collision with fragments of Shoemaker-Levy 9 comet during the period from 17 July to 13 August, by using the SNU 61cm reflector combined with CCD camera and DBVRI filters. In order to get more clear image of impact spots, the observed data were processed by the unsharp masking method, high-pass filtering method and Richardson-Lucy algorithm after the basic processing through IRAF package. The sizes of impact spots range from 2000km to 1000km, and from this size, the original size of comet fragments before collision with Jupiter is estimated to be less than ${\sim}3km$. From the observed rotating rate of impact spots, the rotational period of Jupiter is determined as $9^h$ $56^m$ $32^s$ at the southern latitude of $47^{\circ}{\sim}49^{\circ}$.