http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
안병태,오갑진,박시경,정순간,조의환,김재길,노재섭,이경순,Ahn, Byung-Tae,Oh, Kap-Jin,Park, Si-Kyung,Chung, Sun-Gan,Cho, Eui-Hwan,Kim, Jae-Gil,Ro, Jai-Seup,Lee, Kyong-Soon 한국생약학회 1996 생약학회지 Vol.27 No.3
Seven phenolic compounds were isolated from the leaves of Spiraea salicifolia. Their structures were characterized as cinnamic acid, ${\rho}-hydroxy$ cinnamic acid, ${\rho}-methoxy$ cinnamic acid, $1-O-coumaroyl-{\beta}-D-glucopyranose$, $1-O-caffeoyl-{\beta}-D-glucopyranose$, hyperoside and quercetin $3-O-(6'-O-{\alpha}-L-arbinopyranosyl)-{\beta}-D-galactopyranoside$ by chemical and spectroscopic evidence.
코팅물질과 유화제가 나노입자 제조 및 안정성에 미치는 영향
김병철,천지연,박영미,홍근표,이시경,최미정,Kim, Byeong-Cheol,Chun, Ji-Yeon,Park, Young-Mi,Hong, Geun-Pyo,Lee, Si-Kyong,Choi, Mi-Jung 한국축산식품학회 2012 한국축산식품학회지 Vol.32 No.2
본 실험은 emulsion-diffusion 방법을 이용한 코팅물질과 유화제를 혼합하여 균질하여 유화액을 만든 후 증류수를 첨가하여 확산시킴으로써 나노입자를 제조하는 방법을 사용하였다. 유화공정에 따른 변화를 살펴보기 위하여 균질기 종류와 균질 속도, 균질 시간을 달리하여 그에 따른 입자크기의 변화를 살펴보고, 나노유화액이 가장 잘 제조되는 조건에서 여러 종류의 코팅물질과 유화제를 이용하여 나노입자의 크기 변화를 살펴보았다. 또한 저장 온도와 저장 기간에 따른 나노입자 크기를 관찰 하고 그에 따른 활성에너지를 산출하였다. 유화 공정에 따른 나노입자 크기의 변화를 살펴보면 NEO II의 경우가 가장 작고 고른 나노입자을 형성하였다. 또한 균질 속도가 증가할 수록 입자가 작아지는 것을 알 수 있었다. 하지만 균질 시간이 증가될수록 입자크기가 증가되는 경향을 보였다. PF68은 유화 능력이 가장 좋은 유화제로 관찰되었고 코팅물질은 PCL이 가장 우수한 능력을 나타내어 나노입자를 제조하는데 있어서 가장 적당하다고 사료되었다. 저장 기간에 따른 입자크기를 살펴보면 저장 기간이 증가할수록 크기가 증가하며, 저장 온도가 낮을수록 변화의 폭이 더 큰 것을 알 수 있었다. 본 연구를 통해 균질기 종류, 균질시간, 균질 속도, 코팅물질 그리고 유화제등은 유화액을 제조할 때 중요한 공정 조건이며 다양한 나노캡슐화 공정으로 원하는 크기의 나노입자를 제조할 수 있다고 사료된다. The objective of this study was to investigate the influence of emulsion processing with various homogenization treatments on the physical properties of nanoparticles. For the manufacturing of nanoparticles, by taking the emulsion-diffusion method, various coating materials, such as gum arabic, hydroxyethyl starch, polycarprolactone, paraffin wax, ${\kappa}$-carrageenan and emulsifiers like Tween$^{(R)}$60, Tween$^{(R)}$80, monoglyceride and Pluronic$^{(R)}$F68, were added into the emulsion system. Furthermore, the various speeds (7,000 rpm to 10,000 rpm), and times (15 s to 60 s) of homogenization were treated during the emulsion- diffusion process. NEO II homomixer was the most effective homogenizer for making nanoparticles as 51 nm ($D_{10}$) and 26 nm ($D_{50}$). To manufacture smaller nanoparticles, by using NEO II homomixer, 10,000 rpm of agitation speed, polycaprolactone as coating material, and Pluronic$^{(R)}$F68 as an emulsifier were the optimum operating conditions and components. For the stability of nanoparticles for 7 days, $20^{\circ}C$ of storage temperature was appropriate to maintain the particle size. From these results, the type of homogenizer, homogenization speed, homogenization time and storage temperature could affect the particle size. Moreover, type of coating materials and emulsifier also influenced the size and stability of the nanoparticles.
칼만 필터를 적용한 센서의 고장진단 알고리즘 및 시스템 구현
박정원(Jeong-Won Park),이시경(Si-Kyong Lee),김한실 대한전자공학회 2010 대한전자공학회 학술대회 Vol.2010 No.6
This paper proposes an algorithm to diagnosis a fault detection of the sensor which uses Kalman filter and actually applies the algorithm to a general sensor. Sensor fault detection is an area in which is of great interest in industries and processer which are safety-critical such as nuclear power and chemical processes plant. Consequently, techniques such as Multi variate Modeling, Kalman filters and Principal component analysis have been used to detect a wide range of system faults, including but limited to, those in sensors. This paper focused on the sensor fault diagnosis and sensor fault type generation. And also this paper presents the structure of smart sensor and for the sensor modeling. Sensor model is generated by Kung`s Algorithm, the sensor model is used for the Kalman filter, and Kalman filter generated residual which is difference measurement and estimated value, and Maximum likelihood ration decision theory is used for the sensor fault detection. After fault detection, the sensor fault indicators sort the fault type. And finally we know about the cause of the sensor fault.
고속 보간 법을 이용한 Super-Resolution 복원 기법
조효문(Hyo-Moon Cho),이시경(Si-Kyong Lee),양명국(Myung-Kook Yang) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.7
In this paper, we propose the fast bi-linear interpolation method for SR reconstruction. This method reconstructs the HR image rapidity by considering motion vector information for each LR input image. And its calculation used normalized deviation of image data. As using the motion vector information which is obtained at registration error checking process, this proposed can be achieved the fast and simple SR reconstructed image.
박미정(Mi-Jung Park),김형국(Hyeong-Kook Kim),최경근(Kyong-Kun Choi),구본열(Bon-Yeol Koo),이시경(Si-Kyung Lee) 한국식품과학회 2016 한국식품과학회지 Vol.48 No.1
아로니아 첨가량을 0.3, 0.8, 1.3 및 1.9%로 제조한 막걸리의 발효 중 이화학적 특성과 관능적 특성을 조사하였다. pH는 발효과정 중 모든 실험군에서 감소하여 발효 6일에 현저히 낮아지는 경향을 보였으며, 최종 pH는 3.49-3.74였다. 당도는 담금 직후에는 1.31-2.75oBx로 대조구가 가장 낮았으며, 아로니아 첨가율이 증가할수록 높았다. 발효 2일째 7.96-8.53으로 최대값을 나타내었고, 그 이후부터 최종 발효일까지 서서히 감소하는 경향을 나타내었다. 총산도는 담금 직후 발효 6일까지 급격히 증가하였으며 대조군에 비해서 아로니아를 첨가함에 따라 총산도가 증가되었고 최종발효 14일에는 0.50-0.62%로 나타났다. 알코올 함량은 최종 발효 14일까지 완만히 증가하였고, 11.97-14.13의 분포를 나타내었으며 대조군에 비하여 아로니아 첨가군에서 알코올 함량이 높았다. 아미노산은 막걸리를 담금 직후에는 1.57-2.22%에서 최종발효 14일에는 5.86-6.92%로 나타났으며 아로니아 1.9% 첨가군에서 가장 높게 나타났다. 환원당은 발효 2일째까지 증가하다가 4일 후부터 감소되었으며, 최종발효시점에 1.67-1.97%로 나타내었다. 총균수와 효모수는 모든 시험구가 발효 4일째 최대값을 나타내었고 이후 급격히 감소하였다. 총 폴리페놀함량과 총 플라보노이드 함량은 담금 직후부터 최종 발효시까지 증가하였으며, 아로니아 첨가량이 증가할수록 증가하였다. 관능검사 평가결과에서 색은 아로니아 1.9% 첨가군에서, 단맛은 아로니아 1.3% 첨가군에서, 신맛과 쓴맛은 아로니아 1.9% 첨가군에서 높게 나왔으며. 목넘김(목에 넘어가는 느낌)과 종합적 기호도가 아로니아 1.3%첨가군에서 가장 우수하게 나타났고, 아로니아 막걸리의 개발 상품화 가능성이 높은 것으로 확인되었다. This study was conducted to investigate the quality characteristics of makgeolli containing aronia, (Aronia melanocarpa (0-1.9%)). After an initial decrease in the range of pH from 4.93-5.04 to 3.43-3.61 over a period of 6 days, it gradually increased until 14 days. As the fermentation proceeded, sugar contents and reducing sugar contents initially increased in majority of the samples, and subsequently decreased after 2 days. Total acidity contents increased until 6 days and then became higher as the content of aronia increased. Total acidity levels were within the range of 0.50-0.62%. After 14 days of fermentation, the alcohol contents ranged between 11.97 and 14.13%. Over the same time span, the amino acid content increased from a range of 1.57-2.22 to 5.86-6.92%. The microbial cell count and yeast colony count increased over the initial 4 days and then gradually decreased. Total polyphenol content and total flavonoid of aronia makgeolli were significantly higher than those of the control group. Based on the sensory evaluation, makgeolli with 1.3% aronia demonstrated the highest overall acceptance.