http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Forced Convection Condensation of Vapor on A Cold Water
박재걸,이승홍,Park, Jae-Koel,Lee, Sung-Hong 대한설비공학회 1984 설비저널 Vol.13 No.3
2차원 채널 입구에서의 꿰떼 난류 유동하는 찬 물 위를, 같은 방향으로 빠르게 난류 유동하는 수증기의 응축은 액체필름 초기상태의 과냉 정도에 의하여서 응축능력이 정하여진다. 수증기와 액체의 채널 입구에서의 균일한 속도 및 온도, 그리고 채널 입구에서 액체와 증기가 차지하는 체적비, 즉 액체필름과 채널 높이를 알고 있을 때, 하류로 유동하면서 응축이 일어나는 현상을 예측하는 모델을 제안하고, 실험치와 비교한 것이다. 채널 입구에서 윗쪽으로는 더운 기체, 아래쪽으로는 찬 액체가 평행한 방향으로 유동하면서 접촉하고 평균적인 액체필름의 두께와 단열된 채널 벽체를 가정하여서, 기본방정식으로 연속방정식, 운동방정식을 세우고. 에너지와 운동량 전달 메카니즘 사이에 유사성이 존재한다고 가정하였으며, 전단응력의 크기는 필자의 모델을 적용하였다. 기본방정식을 기체 속도, 액체 속도, 필름의 두께, 압력에 대해서 수치해를 구하여서 동일조건 하에서 실험한 데이터와 비교하였다. 수증기와 액체 경계면에서의 전단응력은 매우 좋은 일치를 보여주고 있다.
수직 동심 환형관 내부유동에서 과냉 유체의 비등 시작 열유속에 관한 표면 볼록 곡률의 영향
변정환,이승홍,Byun, Jung-Hwan,Lee, Sung-Hong 대한기계학회 2002 大韓機械學會論文集B Vol.26 No.11
Effect of Convex Surface Curvature on the Onset of Nucleate Boiling of Subcooled Fluid Flow in Vertical Concentric Annuli An experimental study has been carried out to investigate the effect of the transverse convex surface curvature of core tubes on heat transfer in concentric annular tubes. Water is used as the working fluid. Three annuli having a different radius of the inner cores, Ri=3.18mm, 6.35mm, and 12.70mm with a fixed ratio of Ri/Ro=0.5 are used over a range of the Reynolds number between about 40,000 and 80,000. The inner cores are made of smooth stainless steel tubes and heated electrically to provide constant heat fluxes throughout the whole length of each test section. Experimental result shows that heat flux values on the onset of nucleate boiling of the smaller inner diameter model is much higher than that of the larger size test model.
중간 냉각기가 있는 고압 다단 왕복동식 압축기에 관한 열역학적 해석
이억수,김명훈,이승홍,Lee, Euk-Soo,Kim, Myung-Hun,Lee, Sung-Hong 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.9
Simplified thermodynamic analysis of high pressure 4-stage reciprocating compressors with 4 inter-coolers has been investigated to predict a behavior of a compressor system for NGV(natural gas vehicles). A computer program has been developed to predict and estimate the performance of high pressure 4-stage reciprocating compressor system. Thermodynamic properties of compressed natural gas(CNG) were calculated by ideal gas theory and compression cycle was assumed as reversible adiabatic compression and expansion processes, and isobaric intake and discharge processes. Comparison between results predicted by calculation model and measured by experimental tests is presented.
충돌수분류에 냉각되는 고온 강판의 열전달에 있어 노즐높이의 영향에 대한 연구
이필종,최해원,이승홍,Lee, Pil-Jong,Choi, Hae-Won,Lee, Sung-Hong 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.5
The effect of nozzle height on heat transfer of a hot steel plate cooled by an impinging liquid jet is not well understood. Previous studies have been based on the dimensionless parameter z/d. To test the validity of this dimensionless parameter and to investigate gravitational effects on the jet, stagnation velocity of an impinging liquid jet were measured and the cooling experiments of a hot steel plate were conducted for z/d from 6.7 to 75, and an inverse heat conduction method is applied for the quantitative comparison. Also, the critical instability point of a liquid jet was examined over a range of flow rates. The experimental velocity data for the liquid jet were well correlated with the dimensionless number 1/F $r_{z}$$^2$based on distance. It was thought that the z/d parameter was not valid for heat transfer to an impinging liquid jet under gravitational forces. In the cooling experiments, heat transfer was independent of z when 1/F $r_{z}$$^2$< 0.187(z/d = 6.7). However, it was found that the heat transfer quantity for 1/F $r_{z}$$^2$=0.523(z/d = 70) is larger 11% than that in the region for 1/F $r_{z}$$^2$=0.187. The discrepancy between these results and previous research is likely due to the instability of liquid jet.uid jet.
최형림(Hyung-Rim Choi),이승홍(Seung-Hong Lee),박용성(Yong-Sung Park),강무홍(Moo-Hong Kang),김희윤(Hee-Yoon Kim),최기남(Ki-Nam Choi),주이돈(Yi-Don Joo),하정수(Jeong-Su Ha) 한국산업정보학회 2009 한국산업정보학회논문지 Vol.14 No.5
전 세계적으로 지속가능한 발전을 위한 그린 경영에 관심이 집중되고 있다. 국내에서는 정부의 저탄소 녹색성장 정책의 지원에 따라 항만분야에서도 탄소배출량의 감소와 운영비용의 절감을 목적으로 운영을 위해 필수적으로 사용되는 Crane의 주 동력원을 화석연료에서 전기로 전환하기 위한 노력을 기울이고 있다. 그 중에서도 e-RTGC는 이미 연구를 통해 그 우수성이 검증되고 필요성 또한 높은 것으로 평가되었으나, 실제 터미널에 도입하였을 때 e-RTGC의 효과에 대한 실증분석 연구는 전무하여 그 효과가 입증되지 못한 실정이다. 이러한 가운데 최근 국내 여러 터미널에 e-RTGC가 실제로 도입되고 운영을 하게 됨으로써, 그 동안 부족했던 자료의 충족과 새로운 연구를 위한 활로의 개척이 이루어졌다고 할 수 있다. 이에 본 논문에서는 e-RTGC를 도입한 D터미널을 대상으로 실증분석연구를 진행하여, 컨테이너터미널의 e-RTGC 도입 시 고려되어야 하는 제약 요인과 실제 운영을 통해 얻은 효과와 문제점을 조사 및 분석하고자 한다. 이 연구를 통해 얻을 수 있는 기대효과로는 e-RTGC로 전환하고자 하는 터미널에 중요하게 고려되어야 하는 요인과 실증분석자료를 제공할 수 있을 것이라는 것과, 향후 e-RTGC의 발전 방향에 대한 참고자료로 활용될 수 있다는 점이다. All over the world more and more attention is being paid to green management which enables environment-friendly sustainable development. To keep up with these global trends and in response to the government’s “low carbon green growth” policy, many efforts are being made in the port and logistics in order to drastically reduce carbon emissions and save operating expenses. To this end, the engine power source of the cranes in the container terminal is being replaced with electricity from fossil fuel. Among those cranes, especially e-RTGC has been proved to be practical and excellent in its performance through many previous studies. However, no empirical study has yet been made on its introduction effects when e-RTGC has been introduced to the container terminal. In the meantime, however, many domestic container terminals have introduced e-RTGC, and so some data have been accumulated for further research. Under these circumstances, this study has tried to make an empirical study through the case study of D container terminal, checking the restriction factors to be considered at the time of e-RTGC introduction, and analyzing its introduction effects and problems. We have high expectations that this study will provide key consideration factors and empirical analysis data to the decision makers who plan to introduce an e-RTGC system, and also will be used as a reference to the development direction of e-RTGC.
이억수(Euk-Soo Lee),이승홍(Sung-Hong Lee) 대한기계학회 2008 大韓機械學會論文集B Vol.32 No.12
Laminar film condensation of saturated vapor in forced flow over a flat plate is analysed. The problem is formulated as exact boundary-layer solution and integral approximate solution. From numerical solutions of the governing equations, it is found that the energy transfer by convection and the effect of inertia term in the momentum equation in negligibly small for low pressure but quite important for high pressure. The condensate rate, liquid-vapor interfacial shear stress and local heat transfer are strongly dependent on the reduced pressure Pr and the modified Jacob number Ja/Pr.