http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
외부영상정보 입력 시 DICOM정보 충실성에 대한 평가 - DICOM Validation Tool 이용 -
이송우,이호연,도지훈,장혜원,Lee, Song-Woo,Lee, Ho-Yeon,Do, Ji-Hoon,Jang, Hye-Won 대한디지털의료영상학회 2011 대한디지털의료영상학회논문지 Vol.13 No.1
Now a days, there's many change over for PACS among the most of hospital and it standard for DICOM 3.0. These kind of using of DICOM 3.0 improves increasing of medical imaging exchange and service for patient. However, there's some problems of compatibility caused during carry out CD and DVD from hospital. For this reason, this thesis analyzed patients image targeting those storages requested to hospitals in Seoul by using Validation Toolkit which is recommended from KFDA. The analyze type is like this. Make 100 data, total 500, each of MRI CT Plain x-ray Ultrasound PET-CT images and analyzed type of error occurred and loyalty of information. If express percentage of error occurred statistically, we can get a result as follows MRI 5%, Plain x-ray 11%, CT 18%, US 25%, PET-CT 30%. The reson why percentage of error occurred in PET-CT is because of imperfective support and we could notice that we weren't devoted to information. Even though, PET-CT showed highest percentage of error occurred, currently DICOM data improved a lot compare to past. Moreover, it should be devoted to rule of IHE TOOL or DICOM. In conclusion, we can help radiographer to analyze information of image by providing clues for solving primary problem and further more, each of PACS company or equipment company can enhance fidelity for following standard of image information through realizing the actual problem during transfer of image information.
이송우,Wan Mohd Ashri Wan Daud,이민규 한국공업화학회 2010 Journal of Industrial and Engineering Chemistry Vol.16 No.6
The influence of surface modification of activated carbon on the adsorption of methyl mercaptan (MM),dimethyl disulfide (DMDS), and trimethylamine (TMA) was investigated by treatments with 1N-HNO3solution and 1N-NaOH solution. The surface modifications changed the concentrations of functional groups on the surface of activated carbon. Also, the surface modifications changed breakthrough time and equilibrium adsorption capacity of MM, DMDS, and TMA. The adsorption capacities of MM and DMDS were increased by acid treatment, but decreased by base treatment. On the other hand, the adsorption capacity of TMA was decreased by both acid and base treatments. But the difference ranges of equilibrium adsorption capacities according to acidity and basicity of the surface were relatively small. 2010 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.
이송우,나영수,김도한,류동춘,최동훈,류병순,송승구 한국화학공학회 2002 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.40 No.1
본 연구는 무연탄으로 활성탄을 제조할 경우 성형이 세공특성에 미치는 효과를 고찰한 것이다. 3가지 다른 방법으로 활성탄(파쇄형 활성탄, 압축성형 활성탄, 압축성형 활성탄)을 제조하여 특성을 비교했다. 이중에서 25%의 콜타르와 7%의 물을 혼합하여 압출 성형한 활성탄이 비표면적, 세공부피, 그리고 경도에서 가장 좋은 물성을 나타내었다. 압축 및 압출 성형체의 표면은 무연탄 원탄과는 달리 무연탄 분말이 바인더와 혼합되어 있으므로 매우 거친 상태를 나타내었고, 활성화시 거칠게 형성되어 있는 입자사이로 활성화제인 수증기가 쉽게 침투하여 많은 세공을 형성시킴을 알 수 있었다. 이렇게 형성된 세공을 통해 수증기 활성화반응이 잘 일어나 직경 3,000-50,000Å 범위의 거대세공이 발달하였다. 파쇄형 활성탄에 비해 약 2배의 거대세공(macropore)부피를 가지고 있었으며 경도도 30%에서 95% 이상으로 상승되었다. This study was to investigate the effect of granulation process on pore characteristics in manufacturing anthracitebased activated carbons. The activated carbons were made by three different methods to compare characteristics: the crushed activated carbon, the compressed activated carbon, and the extruded activated carbon. Among these activated carbons, the extruded activated carbon using a binder that consists of 25% coal tar and 7% water showed the best characteristics in specific surface area, pore volume, and hardness. Since the compressed and the extruded substances had coarser surfaces than a raw material, steam could penetrate easily through particles and produce macropores especially in the diameter ranges of 3,000-50,000Å during activation process. The extruded activated carbon showed about twice more macropore volumes than the crushed activated carbon and the hardness was increased from 30% up to 95%.
이송우,문장천,김도한,이창한,최동훈,류동춘,송승구 부산대학교 환경문제연구소 2000 環境硏究報 Vol.18 No.-
The purpose of this study is to investigate the variation of pore size distribution of the coal-based extruded activated carbon. The extruded activated carbon was prepared by extruding the mixture of coal powder and coal tar. Pore size distribution of the extruded activated carbon was compared with that of the extruded coal and the extruded char. Also it was compared with that of the crushed activated carbon, raw coal and char. The extruded coal had coarser surface than that of raw coal. Macropores of the extruded coal were funned near 10,000Å in diameter during carbonization process and steam penetrated easily between particles and were growing between 3,000Å and 20,000Å in diameter during activation process.
수증기 활성화법으로 제조된 영월 석탄계 활성탄의 특성 연구
이송우,권태훈,나영수,최동훈,류동춘,송승구 한국환경과학회 2000 한국환경과학회지 Vol.9 No.4
Activated carbons were prepared from Youngwall coal by steam activation in this study. The feasibility of the Youngwall coal to commercial activated carbon was examined. The variation of pore structures and the development of porosity in activated carbons were investigated by changing activation conditions in batch type apparatus. The values of BET surface area and adsorption capacity of iodine and methylene blue of the resulting activated carbons were obtained as high as 1,000㎡/g, 900㎎/g, 150㎖/g, respectively. Youngwall activated carbon prepared in this study showed much higher pore volume in pore diameter over l0Å than that of commercial reference activated carbon(Ningxia Taihua ZJ-15C) produced from China anthracite.