http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이석희,이상호,방성일,Lee Suk-Hui,Lee Sang-Ho,Bang Sung-Il 대한전자공학회 2005 電子工學會論文誌-TC (Telecommunications) Vol.42 No.9
RF 전력증폭기 및 Doherty 전력증폭기의 열 메모리 효과는 변조신호의 대역폭과 동작 전력의 레벨에 따라 민감하게 영향을 미친다. 본 논문에서는 전기적인 비선형성을 정확히 모델링하고 열 메모리 효과가 Doherty 증폭기의 왜곡형성에 어떤 영향을 미치는지에 대해 연구하였다. Doherty 증폭기의 열 메모리 특성을 모델링하기 위하여 순시적으로 소모되는 전력과 순시 접합온도의 정확한 관계식을 정립하여 제안하였다. 제안된 모델의 파라미터는 서로 다른 여기상태에 따라 전력증폭기의 특성이 결정되는데, 트랜지스터의 열 메모리 효과는 대역폭이 넓은 W-CDMA 및 UMTS 시스템에서 충분히 고려되어야 한다. 이러한 열 메모리 효과를 사전왜곡 함수에 적응하여 선형화된 전력증폭기의 출력스펙트럼에서 최대 20 dB정도의 ACLR 개선효과를 보인다. 측정결과는 60W급 LDMOS Doherty 전력증폭기로 측정하였으며, 열 메모리 보상기는 ADS로 검증하였다. Memory effect, which influence the performance of Doherty amplifier, become more significant and critical in designing these circuits as the modulation signal bandwidth and operation power level increase. This paper reports on an attempt to investigate, model and quantity the contribution of the electrical nonlinearity effects and the thermal memory effects to a Doherty amplifier's distortion generation. Also this raper reports on the development of an accurate dynamic expression of the instantaneous junction temperature as a function of the instantaneous dissipated power. This expression has been used in the construction of an electrothermal model for the Doherty amplifier. Parameters for the nelv proposed behavior model were determined from the Doherty amplifier measurements obtained under different excitation conditions. This study led us to conclude that the effects of the transistor self-heating phenomenon are important for signals with wideband modulation bandwidth(ex. W-CDMA or UMTS signal). Doherty amplifier with electrothermal memory effect compensator enhanced ACLR performance about 20 dB than without electrothemal memory effect compensator. Experiment results were mesured by 60W LDMOS Doherty amplifier and electrothermal memory effect compensator was simulated by ADS.
역공학에서의 Delaunay 삼각형 분할에 의한 점 데이터 감소
이석희,허성민,김호찬,Lee, Seok-Hui,Heo, Seong-Min,Kim, Ho-Chan 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.8
Reverse engineering has been widely used for the shape reconstruction of an object without CAD data and the measurement of clay or wood models for the development of new products. To generate a surface from measured points by a laser scanner, typical steps include the scanning of a clay or wood model and the generation of manufacturing data like STL file. A laser scanner has a great potential to get geometrical data of a model for its fast measuring speed and higher precision. The data from a laser scanner are composed of many line stripes of points. A new approach to remove point data with Delaunay triangulation is introduced to deal with problems during reverse engineering process. This approach can be used to reduce a number of measuring data from laser scanner within tolerance, thus it can avoid the time for handling point data during modelling process and the time for verifying and slicing STL model during RP process.
역공학에서의 노이즈가 포함된 측정데이터의 분할에 관한 연구
이석희,김호찬,허성민,Lee, Seok-Hui,Kim, Ho-Chan,Heo, Seong-Min 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.3
The segmentation has been performed to the data of good quality in most cases, so the adoption of previous segmentation theory to the measured data with a laser scanner does not produce good result because of the characteristics of the data with noise component. A new approach to perform the segmentation on the scanned data is introduced to deal with problems during reverse engineering process. A triangular net is generated from measured point data, and the segmentation on it is classified as plane, smooth and rough segment. The segmentation result in each segment depends on the user-defined criteria. And the difference of the segmentation between the data of good quality and the data with noise is described and analyzed with several real models. The segment boundaries selected are used to maintain the characteristics of the parts during modeling process, thus they contribute to the automation of the reverse engineering.
역공학에서의 Delaunay 삼각형 분할에 의한 STL 파일 생성
이석희,김호찬,허성민,Lee, Seok-Hui,Kim, Ho-Chan,Heo, Seong-Min 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.5
Reverse engineering has been widely used for the shape reconstruction of an object without CAD data and the measurement of clay or wood models for the development of new products. To generate a surface from measured points by a laser scanner, typical steps include the scanning of a clay or wood model and the generation of manufacturing data like STL file. A laser scanner has a great potential to get geometrical data of a model for its fast measuring speed and higher precision. The data from a laser scanner are composed of many line stripes of points. A new approach to remove point data with Delaunay triangulation is introduced to deal with problems during reverse engineering process. The selection of group of triangles to be triangulated based on the angle between triangles is used for robust and reliable implementation of Delaunay triangulation as preliminary steps. Developed software enables the user to specify the criteria for the selection of group of triangles either by the angle between triangles or the percentage of triangles reduced. The time and error for handling point data during modelling process can be reduced and thus RP models with accuracy will be helpful to automated process.