http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이두찬(Doo-Chan Lee),김규영(Kyu-Young Kim),김수원(Soo-Won Kim) 大韓電子工學會 2010 電子工學會論文誌-SD (Semiconductor and devices) Vol.47 No.5
본 논문에서는 디지털 제어 발진기의 전력소모를 최적화하는 설계기법을 제안한다. 디지털 제어 발진기의 Coarse tuning 비트수와 Fine tuning 비트수를 조절하여 LSB Resolution, 주파수 범위, 선형성, 이식성에는 영향을 주지 않고 전력소모를 최적화한다. 이를 위해 제어 비트에 따른 디지털 제어 발진기의 전력소모 변화를 분석하였다. 본 논문에서는 0.13㎛ 1.2V CMOS 라이브러리를 이용하여 제안한 설계기법을 적용한 경우와 그렇지 않은 경우를 모두 설계, 모의실험 및 검증하였다. 제안한 설계기법을 적용한 디지털 제어 발진기는 모의실험결과 283㎒부터 1.1㎓의 클록을 생성할 수 있으며, LSB Resolution은 1.7㎰이다. 디지털 제어 발진기의 출력 주파수가 1㎓일 때 전력소모는 2.789㎽이다. This paper presents a design procedure of digitally controlled oscillator(DCO) for power optimization. By controlling coarse tuning bits and fine tuning bits of DCO, the proposed design procedure can optimize the power dissipation and does not affect the LSB resolution, frequency range, linearity, portability. For optimization, the relationship between control bits and power dissipation of the DCO was analyzed. The DCO circuits using and unusing proposed design technique have been designed, simulated and proved using 0.13㎛, 1.2V CMOS library. The DCO circuit with proposed design technique has operation range between 283㎒ and 1.1㎓ and has 1.7㎰ LSB resolution and consumes 2.789㎽ at frequency of 1㎓.
프로펠러 형상 검사를 위한 자동화 측정 프로세스 및 시스템 개발
이현호(Hyunho Lee),이두찬(Doo Chan Lee),허만주(Man Joo Huh) (사)한국CDE학회 2013 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2013 No.1
The dimensional measurement and inspection technologies of propellers are applied to each stage of casting, matching grinding and inspection in major processes of propeller manufacturing and play a critical role to decide quality level of final products. In thins study, an automation system which is more precise, accurate, rapid and simple to measure fixed pitch propellers greater than 5 m was developed and an optimized measurement process with the automated large volume metrology system, a pitchometer, was founded. The developed system was to automate the whole process from planning, measurement, data processing to generating reports, whereby the work environment for one man was built up and the process was standardized. These have contributed to perform the safe and designed measurement process.
가변 펌핑 클록 주파수를 이용한 모바일 D램용 고효율 승압 전압 발생기
김규영(Kyu-Young Kim),이두찬(Doo-Chan Lee),박종선(Jongsun Park),김수원(Soo-Won Kim) 大韓電子工學會 2010 電子工學會論文誌-SD (Semiconductor and devices) Vol.47 No.6
본 논문에서는 가변 펌핑 클록 주파수를 이용한 모바일 D랩용 고효율 승압 전압 발생기를 제안한다. 제안된 승압 전압 발생기는 효율을 높이기 위해서 3단 Cross-coupled 점하 펌프를 사용하였으며, 또한 최종 출력 전압의 승압 시간을 줄이기 위해 기존의 승압 전압 발생기에서 사용되는 고정된 펌핑 클록 주파수 대신 전압 제어 발생기를 사용하여 펌핑 클록 주파수을 가변하였다. 따라서 제안된 승압 전압 발생기는 1.2 V 전원 전압, 최대 2 ㎃의 부하 전류, 1 ㎋의 부하 캐퍼시터 조건에서 24.0-㎲안에 3.0 V의 최종 출력 전압을 승압할 수 있다. 실험 결과 제안된 승압 전압 발생기는 에너지 소비를 26% (1573 nJ → 1162 nJ), 승압 시간을 29% (33.7-㎲ → 24.0-㎲) 감소시켰다. 따라서 제안된 승압 전압 발생기를 사용함으로써, 높은 에너지 효율과 빠른 승압을 동시에 구현할 수 있다. A energy efficient Vpp generator using a variable pumping frequency for mobile DRAM is presented in this paper. The proposed Vpp generator exploits 3 stages of a cross-coupled charge pump for energy efficiency. Instead of using a fixed pumping frequency in the conventional Vpp generator, our proposed Vpp generator adopts a voltage-controlled oscillator and uses variable frequencies to reduce the ramp-up time. As a result, our Vpp generator generates 3.0 V output voltage with 24.0-㎲ ramp-up time at 2 ㎃ current load and 1 ㎋ capacitor load with 1.2 V supply voltage. Experimental results show that the proposed Vpp generator consumes around 26% less energy (1573 nJ → 1162 nJ) and reduces 29% less ramp-up time (33.7-㎲ → 24.0-㎲) compared to the conventional approach.