http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
제지건조기용 실린더드럼의 다중유로내의 응축수배출에 관한 이론적 연구
이기우(Ki Woo Lee),전원표(Won Pyo Chun),이계중(Kye Jung Lee),장석필(Seok Pil Jang),최웅소(U.S. Choi),하재청(Jae-Cheong Ha) 대한설비공학회 2010 대한설비공학회 학술발표대회논문집 Vol.2010 No.6
The heat transfer process in the cylinder drum for paper drying consists of the thermal resistances by condensate thickness, thickness of shell, and the contact resistance between cylinder and canvas. The most thermal resistance in conventional cylinder drum is generated by condensate, which is specially increased by the increase of revolution per minute (RPM). In this paper, the condensate removal in the cylinder drum, w hich multi-flow channel is attached to the inside surface of cylinder, was analyzed. The maximum RPM of cylinder drum was exam ined for removing the condensate in multi-flow channel by steam pressure without siphon. Steam pressure, channel height, RPM, gap between cover plate and separate plate of steam and condensate and centrifugal force in channel and gap were examined as variables.
PE 필름 두께와 온도에 따른 '상감둥시' 감의 MAP 탈삽 효과
김일호,김지영,남현진,이기우,조두현,이용재,Kim, Il-Ho,Kim, Ji-Young,Nam, Hyun-Jin,Lee, Ki-U,Cho, Doo-Hyun,Lee, Yong-Jae 한국식품저장유통학회 2017 한국식품저장유통학회지 Vol.24 No.6
상온($25^{\circ}C$)과 저온($-1^{\circ}C$)에서 modified atmosphere packaging(MAP)를 이용한 '상감둥시' 감의 탈삽처리를 통하여 각 온도에서 PE 필름의 적정 두께를 구명하고자 하였다. 60(상온에서만 사용), 80, 100, 115, $130{\mu}m$ 두께의 PE 필름을 이용하여 낱개 진공포장 후 각각 상온과 저온에서 탈삽하였다. 상온에서 탈삽은 필름 두께가 두꺼울수록 속도가 빠른 경향이었으나 모든 처리구에서 두께에 관계없이 5일 만에 식용이 가능한 상태로 탈삽되었다. 경도는 모든 처리구에서 비교적 높게 유지되었다. 과육갈변(top flesh browning)과 부패는 20일에 발생되었으며 과피흑변(peel blackening)과 과정부연화(style-end softening)는 적정 두께에서 거의 문제 되지 않았다. 상온 MAP 탈삽의 적정 PE 필름 두께는 $80-100{\mu}m$로, 이 두께에서 5일만에 탈삽되어 10일까지 상품성을 유지한 유통이 가능한 것으로 판단되었다. 저온에서의 탈삽도 필름 두께가 두꺼울수록 속도가 빨랐으며 50일경에 두께에 관계없이 완전히 탈삽되었다. 경도는 필름 두께에 따른 큰 차이는 없었으나 두꺼울수록 높은 경향을 보였다. 과육갈변과 부패는 필름 두께와 관계없이 모든 처리구에서 90일까지 발생되지 않았다. 과피흑변과 과정부연화는 90일에 발생되었으며 115와 $130{\mu}m$ 두께에서 이취가 발생되었다. 저온 MAP 탈삽의 적정 PE 필름 두께는 $80-100{\mu}m$로, 이 두께에서 50일만에 탈삽되어 80일까지 상품성을 유지한 유통이 가능한 것으로 판단되었다 We investigated the effect of PE film thickness on the modified atmosphere packaging (MAP) deastringency of 'Sanggamdungsi' (Diospyros kaki cv.) astringent persimmon at room temperature ($25^{\circ}C$) and low temperature ($-1^{\circ}C$). The fruits were individually packaged with PE film of which the thickness is 60, 80, 100, 115 or $130{\mu}m$ and stored at room or low ($-1^{\circ}C$) temperature. At room temperature, firmness shows the highest value (23.3-26.5) at $100{\mu}m$ thickness. Top flesh browning and decay was monitored at 20 days after storage, and peel blackening and style-end softening was negligible at optimal thickness. Therefore, optimal film thickness of deastringency at room temperature is $80-100{\mu}m$. At this thickness, the astringency was removed after 5 days and the fruits can be distributed until 10 days after the MAP. At low ($-1^{\circ}C$) temperature, firmness was maintained regardless of film thickness. However, the firmness is higher as the film is thicker. Top flesh browning and decay was not occurred even after 90 days after storage. Peel blackening and style-end softening was monitored at 90 days after storage. Off-flavor was monitored at 115 and $130{\mu}m$ thickness. Therefore, optimal film thickness of deastringency at low ($-1^{\circ}C$) temperature is $80-100{\mu}m$. At this thickness, the astringency was removed after 50 days and the fruits can be distributed until 80 days after the MAP.