http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
미래성장 LED 융합 기술 - LED 농생명 융합 기술의 현황 및 전망
이규한,Lee, Gyu-Han 한국광학기기산업협회 2013 光學世界 Vol.145 No.-
LED(light emitting diode)는 반도체의 P-N 접합 다이오드의 일종으로, 순방향으로 전압이 걸릴 때 단파장 광이 방출 되는 현상인 전기발광 효과를 이용한 화합물 반도체 소자의 일종으로 발광 다이오드라고도 한다. LED는 화합물 반도체의 화합물의 종류 및 조성비를 조절하여 적외선, 자외선과 빨강에서 보라에 이르는 모든 가시광선이 구현 가능하고, 소비전력이 기존의 광원에 비해 우수한 특성을 가지고 있어, 일반 조명, 산업용 조명, 전광판, TV의 BLU 등 여러 분야에 걸쳐 다양하게 이용되고 있다.
Gyu-Han Lee(이규한),Ji-Woong Choi(최지웅),Ji-Hyun Seo(서지현),Hojin Ha(하호진) 한국기계가공학회 2019 한국기계가공학회지 Vol.18 No.11
Interest in renewable energy is rapidly growing around the world. One of the most popular renewable energy sources is solar power, and photovoltaic (PV) systems are the most representative route for generating solar energy. However, with the growing adoption of solar power systems, the demand for land on which to install these systems has increased, which has caused environmental degradation. Recently, floating PV systems have been designed to utilize idle water surface areas of dams, rivers, and oceans. Because floating PV systems will be exposed to harsh environmental stresses, the safety of such systems should be secured before installation. In this study, the structural robustness of a floating PV system was analyzed by conducting numerical simulation to investigate whether the system can withstand harsh environmental stresses, such as wind and wave loads. Additionally, conventional wind and wave load predictions based on the design method and the simulation results were compared. The comparison revealed that the design method overestimated wind and wave loads. The total drag of the PV system was significantly overestimated by the conventional design criteria, which would increase the cost of the mooring system. The simulation offers additional advantages in terms of identifying the robustness of the floating PV system because it considers real-world environmental factors.
이규한(GYU-HAN LEE),김대환(DAE-HWAN KIM),이상길(SANG-GIL LEE),손영대(YOUNG-DAE SON) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.10
본 논문은 부스터펌프 자동제어시스템의 성능평가를 위한 시험방법에 관한 것이다. 본 논문에서 제안하는 시험방법은 펌프 자체의 성능평가에만 의존했던 기존의 방법과 달리 펌프와 펌프를 제어하기 위한 자동제어장치까지 포함한 전체 시스템에 대한 성능평가를 할 수 있도록 한다. 본 시험방법은 부스터펌프 자동제어시스템을 설치하고, 토출 측에 전자제어밸브를 설치하여 이를 제어함으로써 물의 사용량 즉, 유량에 변화를 주게 된다. 이때 토출압력을 일정하게 유지하도록 설정된 자동제어시스템은 펌프를 제어하여 물을 토출 측으로 공급하게 되며 이를 통해 토출압력의 변화를 측정하는 방법이다. 이러한 시험방법에 있어서 정상상태특성시험, 가속 특성시험, 응답특성시험을 수행한다. 결과적으로 본 논문의 시험방법을 통해 전체 시스템에 대한 성능평가가 가능하며, 모든 시험과정을 자동화 할 수 있고 다양한 운전환경에 대한 유량변화를 짧은 시간 내에 적용하여 시험에 소요되는 시간을 단축할 수 있다.
Ti 함량 변화에 따른 X선 노광 마스크용 W-Ti 흡수체의 물성 연구
김경석,이규한,임승택,이승윤,안진호,Kim, Gyeong-Seok,Lee, Gyu-Han,Im, Seung-Taek,Lee, Seung-Yun,An, Jin-Ho 한국재료학회 2000 한국재료학회지 Vol.10 No.3
W에 소량의 Ti를 첨가하여 그 함량 변화에 따른 X-선 마스크 흡수체용 W-Ti 박막의 물성을 연구하였다. W-Ti 박막은 DC magnetron sputtering system을 이용하여 증착하였다. Sputtering 증착시 증착압력의 증가에 따라 박막의 밀도는 감소하였으며 박막의 응력은 압축응력으로 바뀌었다. Ti 함량이 증가함에 따라 천이 압력 근방에서의 응력곡선의 기울기가 감소하였으며 천이 압력도 점차 낮아지는 경향을 보였다. Pure-W 시편의 경우 천이 압력이 약 6.5mTorr로 비교적 높았으며, 이 때 박막의 밀도는 $17.8g/\textrm{cm}^3$이었고 함량 6.5%에서 가장 낮은 천이 압력(4.3mTorr)을 보였으며, 이때의 박막 밀도는 $17.7g/\textrm{cm}^3$로 pure-W과 거의 차이가 없음을 알 수 있었다. SEM을 이용한 미세구조 분석결과 pure-W 박막은 원형의 주상정 조직을 보이고 있으며, Ti가 첨가된 W-Ti 박막의 경우에는 가늘고 긴 침상 모양을 가지는 주상정 조직을 형성하고 있다. 또한 이러한 침상조직은 Ti함량이 증가할수록 더욱 발달하고 있으며, AFM 분석결과 Ti 첨가 시편 모두 $18{\AA}$이하의 우수한 평균 표면 평활도를 나타내었다. 나타내었다. W-Ti film properties for X-ray absorber applications have been investigated with Ti composition have been investigated with Ti composition variation. W-Ti films were deposited by DC magnetron sputtering system. As the working pressure increases, film density decreases and film stress changes from compressive to tensile. The transition pressure (where the film stress in zero) and the stress gradient decrease by adding Ti into W-Ti(6.5 at.%) film shows the smallest stress gradient and transition pressure. It also shows high density ($17.7g/\textrm{cm}^3$) similar to that of pure-W ($17.8g/\textrm{cm}^3$) at the transition pressure. All the films show columnar structure, and its size decreases with increasing Ti composition. Surface roughness and thermal stability are improved by Ti-addition, resulting in a better property for X-ray absorber applications.
실리콘 질화막을 이용한 X-ray Lithography마스크용 박막물질의 개발
이태호,정창영,이규한,이승윤,안진호,Lee, Tae-Ho,Jeong, Chang-Yeong,Lee, Gyu-Han,Lee, Seung-Yun,An, Jin-Ho 한국재료학회 1997 한국재료학회지 Vol.7 No.5
본 연구에서는 LPCVD, PECVD, ECR plasma CVD방법을 이용하여 x선 노광 공정용 마스크의 투과막재료로써의 실리콘질화막의 증착과 그의 물성에 관하여 실험하였다. X선 노광 마스크용 투과막의 재질로써 요구되는 적정인장응력에 가지는 증착조건으로 실리콘질화막을 1$\mu\textrm{m}$정도의 두께로 증착하였으며 이 조건에서의 물성을 SIMS, XPS, ESR, AFM, spectrophoto-metry를 이용하여 비교 분석하였다. ECR plasma CVD방법으로 얻은 실리콘 질화막은 화학양론적 조성(Si/N=0.75)에 근접하는 막을 얻을 수 있었으며 표면 평활도와 가시광투과도가 가장 우수한 결과를 얻었다. 저온 증착법인 PECVD로 얻은 막은 Si/N비가 약 0.86정도이고 산소와 수소의 불순물함량이 가장 높게 나타났다. SiH$_{2}$CI$_{2}$를 이용한 LPCVD막의 경우는 Si-rich조성을 가지지만 수소 불순물의 함량이 가장 작게 나타났고 표면거칠기는 가장 나쁘게 나타났다. 그러나 위의 방법으로 얻은 실리콘 질화막의 최대 가시광투과도는 633nm파장에서 모두 90%이상의 값을 나타내었고, 또한 표면 평활도도 0.64-2.6nm(rms)로 현재 연구되고 있는 다른 X선 투과막재료보다 월등히 우수한 결과를 보였다.
수상 태양광 발전 시스템의 부유체 형상과 구성요소가 수력학적 안전성에 미치는 영향
최지웅(Ji-Woong Choi),이규한(Gyu-Han Lee),김재운(Jae Un Kim),허남욱(Nam Wook Heo),차용현(Yong Hyun Cha),하호진(Hojin Ha) 한국가시화정보학회 2021 한국가시화정보학회지 Vol.19 No.1
As the photo-voltaic (PV) industry grows, the floating PV has been suggested to resolve current environmental destruction and a lack of installation area. Currently, various floating PV systems have been developed, but there is a lack of studies on how the shape of the floating body and other compositions are affecting structural behavior. In this study, the behavior of the floating PV was investigated at the various length of mooring lines, stiffness of connecting hinges, and size of floating bodies. The shortest mooring lines with the distributed type floating PV showed the least force on the floating body and corresponding motion. A frictionless hinge is safer at the regular and low-height wave, while a stiff hinge is safer at irregular and high-height wave. In addition, due to the bi-axial distribution of the connecting hinge, 45° direction wave was found to be the most dangerous.