http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이관철,정기형 한국광학회 1992 한국광학회지 Vol.3 No.1
Marx generator와 진공 다이오드, Bifilar helical wiggler, 인도자장 솔레노이드 등을 이용하여 마이크로파 영역의 자유전자 레이저를 설계 제작하였다. Bifilar helical wiggler의 자장분포를 분석하였고 공간전하의 수직성분 효ㅗ가를 고려하여 계산한 전자궤적 모의실험을 통하여 Wiggler자장이 전자빔 입사에 적합함을 확인하였다. Wiggler자장 300G, 인도자장 4.4kG, 전자빔 에너지 170keV일때 분산방정식에 의하여 계산된 출력 주파수는 약 11GHz였고 실험 결과 나타난 출력 주파수의 점위는 9.78GHz-11.7GHz로 추정되었다. 전자 속도의 축방향 퍼짐을 고려하여 이론적으로 이득을 계산하였다. A microwave free electron laser which consists of Marx generator, vacuum diode, bifilar helical wiggler, and guide solenoid was designed and constructed. The analysis of the magnetic field distributions of the bifilar helical wiggler and computer simulation of electron trajectories with the perpendicular effect of space charges led to the conclusion that the magnetic field distributions are suitable for the electron beam injection. Output frequency in a single $TE_{11}$</TEX. mode derived from the dispersion relation with parameters of 300G wiggler field, 4.4 kG guide field, and 170 keV electron beam energy was about 11 GHz. And this agreed with the frequency range of 9.78 GHz~11.7 GHz deduced from the experimental result. The gain was calculated by considering the effect due to the axial spread of the electron velocity distribution.
이관철,김원일,이윤경,강재관,왕덕현,김병창,정인룡 한국기계가공학회 2005 한국기계가공학회지 Vol.4 No.3
Neural networks, which have learning and self-organizing abilities, can be advantageously used in the pattern recognition. Neural network techniques have been widely used in monitoring and diagnosis, and compare favourable with traditional statistical pattern recognition algorithms, heuristic rule-based approaches, and fuzzy logic approaches. In this study the fault diagnosis of the face-milling using the artificial neural network was investigated. After training, the sample which measure load current was monitored by constant output results.
Eu3+을 도핑한 KNaNbO3의 발광 및 광변색 특성
이관철,양민균,이윤상 한국물리학회 2023 새물리 Vol.73 No.10
K0.5Na0.5NbO3 (KNN)은 대표적인 납을 사용하지 않는 강유전성 페로브스카이트(perovskite) 재료로 널리 인정받고 있다. 본 연구는 Eu3+가 도핑된 KNN (KNN:Eu)에서 발광 및 광변색 특성을 조사하였다. 엑스선 회절 및 리트펠트 정제 분석을 통해 KNN:Eu의 격자 구조가 직방정계와 정방정계의 혼합 상을 나타내는 것으로 확인되었다. 광발광의 세기는 x = 0.05인 샘플에서 최대가 되었으며, 이는 KNN:Eu의 구조적 특성과 잘 일치하는 결과를 나타냈다. 또한 KNN:Eu의 광변색 특성으로 인한 광발광 강도 변화에 주목하였다. 자외선 조사 후 가시광선 영역에서 확산 반사율은 약 17.6% 감소하였고, 광발광 강도는 최대 68% 감소하였다. 이러한 변화는 열 에너지를 통해 99%까지 회복 가능한 역변환 거동을 보였다. K0.5Na0.5NbO3 has been widely used as a representative of lead-free ferroelectric perovskite materials. We investigated the luminescence and photochromic properties of Eu3+-doped KNN (KNN:Eu). X-ray diffraction and Rietveld refinement analyses revealed mixed- orthorhombic and tetragonal lattice structures of KNN:Eu. The photoluminescence (PL) intensity was maximum at x = 0.05, in good accord with KNN:Eu structural properties. We also noted variations in PL intensity due to KNN:Eu photochromic properties. The diffuse reflectance in the visible light range and the PL intensity decreased by 17.6% and 68%, respectively, after ultraviolet irradiation. Heating restored these changes up to 99%.
김원일,이진,이윤경,왕덕현,이관철 慶南大學校 附設 工業技術硏究所 1999 硏究論文集 Vol.17 No.-
본 연구에서는 엔드밀 절삭에서·버와 공구 마멸 특성에·관한 연구를 수행하였고 다음과 같은 결과를 얻을 수 있다. 출구 버의 생성은 알루미늄에서 절삭 깊이 1.5mm에서 0.1mm의 버가 발생되었고 황동은 그 보다 높을 0.2mm의 버가 생성되었다. 또한 측면 버에서도 황동이 알루미늄보다 높은 값을 보였으며 이것은 절삭에서의 버의 생성이 재료의 특성에 크게 기인함을 알 수 있다. 공구 마멸은 버의 발생이 많은 황동에서 크레이터 마멸과 날끝 마멸이 많이 발생됨을 알 수 있다. In this study, the properties of burr and tool wear in endmill cutting have been studied and the following conclusions could be obtained. As experimental results. exit burr height were obtained as 0.1mm for aluminum and 0.2mm for brass under the condition of 1.5mm in cut depth. And also side burr height for brass was higher than aluminum. It was found from the experimental results that burr formation in cutting largely depend on mechanical properties of machined materials. Tool wear properties of the brass, including crater wear and cutting edge wear, were also investigated.