http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최한균 ( Han-kyun Choi ),강의철 ( Eu-cheol Kang ),김현수 ( Hyun-soo Kim ),이관행 ( Kwan-heng Lee ) 한국정보처리학회 2005 한국정보처리학회 학술대회논문집 Vol.12 No.2
최근 3 차원 스캐닝(Scanning) 기술의 발달로 형상 및 색상 정보 데이터를 동시에 획득할 수 있게 되었다. 특히 한번의 측정으로 다량의 데이터를 확보할 수 있기 때문에 3 차원 데이터의 정합(Registration) 및 병합(Merging) 과정에서 계산량이 증가하게 된다. 또한 정합과 병합 후의 대용량 데이터 자체로는 3 차원 모델의 저장, 전송, 처리 및 렌더링(Rendering) 등의 과정에서 어려움이 있다. 따라서 모델의 기하 정보와 색상, 질감, 곡률 등의 속성 정보를 유지하면서 데이터의 양을 감소시키는 메쉬 간략화 기술이 필요하다. 현재 널리 쓰이는 이차 오차 척도(Quadric Error Metric) 방법으로 메쉬를 극심하게 감소하게 되면 오차가 누적되어 기하 정보 및 속성 정보가 소실된다. 본 연구에서는 이를 방지하기 위해 이차 오차 척도 감소화 과정에서 곡률과 색상 기반의 정점 재조정 방법을 제안한다.
원통 연삭에서 가공 능률 향상을 위한 연삭 저항의 측정에 관한 연구
김원일,이진,이윤경,왕덕현,이상복,이관철,문원길 경남대학교 공업기술연구소 2000 硏究論文集 Vol.18 No.-
본 연구에서는 원통 연삭 가공에서 가공 능률 향상을 위한 연삭 저항을 측정하고자 연삭 가공 중에 발생하는 연삭 저항의 추이를 확인하였고 다음과 같은 결과를 얻었다. 숫돌과 공작물간의 연삭 강성은 공작 속도의 증가에 따라 지지계의 강성이 높은 경우 증가하였고 절삭 깊이와 연삭 숫돌의 속도에는 연삭 강성이 감소하는 경향을 보였다. 또한 총합 강성은 공작 속도, 절삭 깊이 및 연삭 숫돌의 속도 증가에 따라 지지계의 강성이 높을 수록 증가하였다. 연삭기의 강성 변형과 가공 능률에 영향을 주는 값으로 연삭 강성비는 지지계의 강성이 높을 수록 감소하였다. In this study, the measurement of grinding resistance to improve grinding efficiency in cylindrical grinding was studied and the following conclusions could be obtained. Relation grinding wheel and workpiece, grinding stiffness increases according to increase of work speed for high machine stiffness and decreases depth of cut and grinding wheel speed. Also, resultant stiffness increases high machine stiffness according to increase work speed, depth of cut and grinding wheel speed. The values of the effect stiffness deflection in grinding machine, grinding stiffness ratio decrease according to high machine stiffness.
김원일,이진,이윤경,왕덕현,이관철 慶南大學校 附設 工業技術硏究所 1999 硏究論文集 Vol.17 No.-
본 연구에서는 엔드밀 절삭에서·버와 공구 마멸 특성에·관한 연구를 수행하였고 다음과 같은 결과를 얻을 수 있다. 출구 버의 생성은 알루미늄에서 절삭 깊이 1.5mm에서 0.1mm의 버가 발생되었고 황동은 그 보다 높을 0.2mm의 버가 생성되었다. 또한 측면 버에서도 황동이 알루미늄보다 높은 값을 보였으며 이것은 절삭에서의 버의 생성이 재료의 특성에 크게 기인함을 알 수 있다. 공구 마멸은 버의 발생이 많은 황동에서 크레이터 마멸과 날끝 마멸이 많이 발생됨을 알 수 있다. In this study, the properties of burr and tool wear in endmill cutting have been studied and the following conclusions could be obtained. As experimental results. exit burr height were obtained as 0.1mm for aluminum and 0.2mm for brass under the condition of 1.5mm in cut depth. And also side burr height for brass was higher than aluminum. It was found from the experimental results that burr formation in cutting largely depend on mechanical properties of machined materials. Tool wear properties of the brass, including crater wear and cutting edge wear, were also investigated.
장성록,김용수,이관석,김유창,배동철 한국안전학회 2003 한국안전학회지 Vol.18 No.3
Recently, work-related musculoskeletal disorders(WMSDs) are one of major issues in occupational safety and health in Korea Main risk factors of WMSDs include manual handling of heavy weight loads, awkward posture, repetitive tasks, prolonged static muscle contraction, and so on. The number of injured workers has rapidly increased and the related regulation was amended to improve the work conditions and environments. And demands for workers' compensation and improvement of work conditions and environment to prevent WMSDs have increasingly been raised. This study focused on managerial system to prevent WMSDs. Literal survey and questionnaire survey were accomplished to propose a management system in Korea for preventing WMSDs.