http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
지하철 터널 환경에서 2.65 GHz 대역신호의 전파전파 특성
최명선,김도윤,조한신,문철,육종관,박한규,Choi Myung-Sun,Kim Do-Youn,Jo Han-Shin,Mun Cheol,Yook Jong-Gwan,Park Han-Kyu 한국전자파학회 2005 한국전자파학회논문지 Vol.16 No.5
The research deals with the prediction and the measurement of electromagnetic wave propagation in rectangular shaped tunnels at f=2.65 GHz. The received power level was measured in the straight and the curved tunnel by using a spectrum analyzer and Satellite DMB mobile phone. Thus we have gotten the data for two cases, the straight and the curved tunnel whose radius is 300m. In addition, the prediction of wave propagation was conducted based on the ray-launching method, in same tunnel where measurement was performed. A good agreement of the measured and the predicted path loss could be confirmed. The measured path loss shows a marked difference in propagation loss: the path-loss exponent, 3.21, and 3.98, for a straight and a curved tunnel, respectively. The reason that path-loss exponent is high in a curved tunnel is that there is no direct wave but only the reflected waves, which attenuates rapidly with distance due to multiple reflections. Also the predicted path loss shows path loss exeponent, 3.2 and 3.95, for a straight and a curved tunnel which are similar to the simulation results. 본 논문에서는 모의 실험과 측정을 통해 단면이 직사각형인 터널에서 위성 DMB 상용 주파수 대역인 2.65GHz 신호의 전파전파 특성을 분석하였다. 스펙트럼 분석기와 위성 DMB 말기를 이용하여 직선 터널과 300 m의 곡률 반경을 갖는 곡선 터널에서 수신 전력을 측정하여 경로 손실 특성을 비교 분석하였다. 또한 동일한 환경에 대해 ray-launching 방법을 이용한 모의 실험을 수행하여 경로 손실을 예측하고 측정 결과와 비교 분석하였다. 모의실험을 통한 수신신호의 평균 전력은 측정 결과와 2 dB 이내의 오차를 보였으며 이를 통해 시뮬레이터의 신뢰성을 확인할 수 있었다. 측정 결과를 통해 직선 터널과 곡선 터널의 경로 손실 지수는 3.21, 3.98로 차이가 발생함을 알 수 있었다. 이는 곡선 터널의 경우 직접파는 존재하지 않으며 다수의 벽면 반사로 감쇄되어 수신되는 반사파만이 수신기에 도달하기 때문이다. 모의 실험 결과 또한 직선 터널과 곡선 터널의 경로 손실 지수는 3.2, 3.95로 예측할 수 있었으며 이 값은 측정 결과와 거의 일치함을 확인할 수 있었다.
조한신,김도윤,문철,육종관,Jo Han-shin,Kim Do-youn,Mun Cheol,Yook Jong-gwan 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.5a
본 논문에서는 터널환경에서 위성 DMB(Digital Multimedia Broadcasting) 시스템의 BER성능을 예측하기 위한 방법 및 결과를 제시하였다. 이 방법은 ray-tracing기법을 이용해 얻을 수 있는 특정지역에 대한 채널 모델을 기반으로 하기 때문에 레일리 및 라이시안 확률 분포와 같은 기존의 수학적 모델과 통계적 특성이 일치하지 않는 임의의 페이딩 채널에 대한 BER특성을 예측할 수 있는 장점을 갖는다. ray-tracing방법을 이용하여 얻은 터널 페이딩 채널 데이터를 몬테카를로 방법을 이용한 BER 시뮬레이션에 적용하였다. 세 종류의 터널환경 모두 BER성능은 레일리 페이딩(K=0) 일 때 보다 우수하고 K=3일 때 보다 열악하였다. 또한 위성 DMB 시스템 E의 요구 BER인 0.001을 기준으로 하였을 때의 $E_b/N_0$는 레일리 페이딩 채널과 터널 페이딩 채널 사이에 $1{\sim}1.5\;dB$정도의 차이가 있음을 확인할 수 있었다. A different alternative method for simulating bit error rate(BER) performance of Satellite Digital Multimedia Broadcasting(DMB) in tunnel environments is presented. The method based on a channel model obtained by ray-tracing is able to support BER estimation over the channel presents arbitrary statistics that are difficult to fit to an analytic expression. The BER performance for System E over the tunnel fading channel that obtained by ray-tracing is predicted by the monte-carlo method. It can be observed that the BER performance for a straight tunnel channel is better than that for a line-of-sight(LOS) area in curved tunnel. Also, the BER performance for LOS areas in a curved tunnel outperforms that for non-line-of-sight(NLOS) areas in a curved tunnel. The BER performances for straight, curved LOS and curved NLOS tunnel channels are better than that for a Rayleigh channel(K=0) and less than that for a Rician channel with K=3. Moreover, for BER=10-3, it can be seen that there is approximately a $1{\sim}1.5\;dB$ difference between those three types of tunnel channels and a Rayleigh channel.
플라즈마의 특성 분석을 위한 수정된 로렌츠 분산 모형 기반 FDTD 알고리즘
안욱현(Wookhyun Ahn),김상인(Sangin Kim),조창석(Changseok Cho),오태주(Taejoo Oh),이용식(Yongshik Lee),오일영(Ilyoung Oh),임진우(Jinwoo Yim),하정제(Jungje Ha),배지훈(Gihun Bae),유흥철(Heung Cheol You),육종관(Jong-Gwan Yook) 한국전자파학회 2021 한국전자파학회논문지 Vol.32 No.2
본 논문은 유한 차분 시간 영역법(FDTD: finite-difference time-domain)에 적용 가능한 플라즈마 분산 모형을 제안한다. 주파수에 따라 전기적 특성이 변하는 플라즈마의 분산 특성을 정확하고 효율적으로 모델링하기 위해 수정된 로렌츠 분산 모형을 이용하여 표현하였다. 가중최소제곱법 기반의 복소 곡선 접합법을 적용하여 플라즈마에 대한 수정된 로렌츠 분산 모형의 계수를 추출하였으며, 수정된 로렌츠 분산 모형을 FDTD에 적용하는 방법을 논의하였다. 본 논문에서 제안한 수정된 로렌츠 분산 모형 기반의 플라즈마 모형이 유전체 장벽 방전(DBD: dielectric barrier discharge) 플라즈마 발생기를 유전체 슬래브로 등가 모델링하여 추출한 유전율의 데이터와 일치하는 것을 확인하였다. 광대역 레이다 단면적(RCS: radar cross-section) 측정실험의 결과와 비교를 통해 제안한 수정된 로렌츠 분산 모형 기반의 FDTD 알고리즘의 정확도를 검증하였다. In this paper, to analyze the dispersive characteristics of plasma, a dispersive model suitable for the finite-difference time-domain (FDTD) method is proposed. The dispersive characteristics of plasma with varying electrical properties according to frequency were accurately and efficiently expressed using the modified Lorentz dispersive model. The coefficient of the modified Lorentz dispersive model was extracted by applying complex curve fitting based on the weighted least squares method. The method of applying the modified Lorentz dispersion model to the FDTD is discussed. The plasma model based on the modified Lorentz dispersion model proposed in this paper was verified to match the data of the dielectric barrier discharge (DBD) plasma generator from dielectric slab equivalent modeling. The accuracy of the proposed FDTD algorithm based on the modified Lorentz dispersive model was verified by comparison with the results of the broadband radar cross-section (RCS) measurement experiment.
Jun Seop Yun,Hyeeun Song,Nam Hee Kim,So Young Cha,Kyu Ho Hwang,Jae Eun Lee,Cheol-Hee Jeong,Sang Hyun Song,Seonghun Kim,조은애산드라,김현실,육종인 한국분자세포생물학회 2022 Molecules and cells Vol.45 No.12
A structural protein of SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2), nucleocapsid (N) protein is phosphorylated by glycogen synthase kinase (GSK)-3 on the serine/arginine (SR) rich motif located in disordered regions. Although phosphorylation by GSK-3β constitutes a critical event for viral replication, the molecular mechanism underlying N phosphorylation is not well understood. In this study, we found the putative alpha-helix L/FxxxL/AxxRL motif known as the GSK-3 interacting domain (GID), found in many endogenous GSK-3β binding proteins, such as Axins, FRATs, WWOX, and GSKIP. Indeed, N interacts with GSK-3β similarly to Axin, and Leu to Glu substitution of the GID abolished the interaction, with loss of N phosphorylation. The N phosphorylation is also required for its structural loading in a virus-like particle (VLP). Compared to other coronaviruses, N of Sarbecovirus lineage including bat RaTG13 harbors a CDK1-primed phosphorylation site and Gly-rich linker for enhanced phosphorylation by GSK-3β. Furthermore, we found that the S202R mutant found in Delta and R203K/G204R mutant found in the Omicron variant allow increased abundance and hyper-phosphorylation of N. Our observations suggest that GID and mutations for increased phosphorylation in N may have contributed to the evolution of variants.
대면 구조 유전체 장벽 방전 플라즈마의 X-Band 내 RCS 저감 효과
오태주(Taejoo Oh),조창석(Changseok Cho),안욱현(Wookhyun Ahn),김상인(Sangin Kim),육종관(Jong-Gwan Yook),이장재(Jangjae Lee),유신재(Shinjae You),임진우(Jinwoo Yim),하정제(Jungje Ha),배지훈(Gihun Bae),유흥철(Heung Cheol You),이용식(Yongshi 한국전자파학회 2020 한국전자파학회논문지 Vol.31 No.12
본 논문에서는 RCS 저감을 위한 대면 구조 유전체 장벽 방전(DBD: dielectric-barrier-discharge) 플라즈마 발생기를 제안한다. 두께가 0.254 mm 두께인 Ro4350b 기판 위, 아랫면에 16×0.5 ㎠ 크기의 도체가 5 mm의 간격을 두고 서로 마주보고 있는 구조로 타겟에 부착시킴으로써 레이다 단면적(RCS)을 감소시킬 수 있다. 전극이 수직으로 놓일 수밖에 없는 평행판 커패시터 구조의 기존 발생기와 달리 제안한 발생기는 전극이 레이다 신호의 입사 방향과 평행하게 놓이므로 목표물의 RCS에 영향을 최소화하여 플라즈마의 효과를 극대화할 수 있다. 제안하는 대면 구조 발생기를 42층으로 적층한 뒤 20×20 ㎠ 크기의 구리 평판 목표물에 적용하여 X-band 내에서 최대 3.2 dB의 RCS 감소 효과가 있는 것을 실험적으로 검증하였다. 이를 통해 제안하는 플라즈마 발생기의 구조적인 장점과 더불어 RCS 저감 효과 측면에서도 그 우수한 성능을 확인하였다. A dielectric barrier discharge (DBD) plasma generator with a face-to-face multilayer structure for radar cross section (RCS) reduction is designed. The generator includes two electrodes of 16×0.5 ㎠ size, facing each other. Because the electrodes are on the plane that is parallel to the direction of the incident wave, the effect of the generator on the RCS of the target is significantly reduced, particularly when compared to conventional parallel plate-type generators. This simplifies the design procedure for the DBD generator and maximizes the effect of the plasma on RCS reduction. For experimental verification, 42 layers of the proposed generator with a distance of 5 mm between the two electrodes are stacked to reduce the RCS of a 20×20 ㎠-sized copper plate. Experimental results demonstrated a reduction of approximately 3.2 dB in the RCS in the X-band.