http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
MB-OFDM UWB 시스템을 위한 주파수 합성기의 유형별 설계 및 비교
이재경(J. K. Lee),정태현(T. H. Cheong),박종태(J. T. Park),유종근(C. G. Yu) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.10
This paper describes fast-hopping frequency synthesizers for multi-band OFDM(MB-OFDM) ultra-wide band(UWB) systems. Three different structures in generating 3 center frequencies(3432㎒, 3960㎒. 4488㎒) are designed and compared. The first structure generates 3 center frequencies using only one PLL operating at 4224㎒. The second uses three PLLs operating at corresponding center frequencies. The third employes two PLLs operating at 3960㎒ and 528㎒. Simulation results using a 0.18㎛ RF CMOS process parameters show that the third structure exhibit the best characteristics. The band switching time of the proposed synthesizer is less than 1.3㎱ and the spur is less than -36㏈c. The synthesizer consumes 22㎃ from a 1.8V supply.
박준규(J. K. Park),심현철(H. C. Shim),박종태(J. T. Park),유종근(C. G. Yu) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.10
This paper describes a 2.5V, 320㎒ low-noise and low-power Phase Locked Loop(PLL) using a noise-rejected Voltage Controlled ring Oscillator(VCO) fabricated in a TSMC 0.25㎛ CMOS technology. In order to improve the power consumption and oscillation frequency of the PLL, The VCO consist of three-stage fully differential delay cells that can obtain the characteristic of high speed, low power and low phase noise. The VCO operates at 7㎒-670㎒. The oscillator consumes 1.58㎃ from a 320㎒ frequency and 2.5V supply. When the PLL with fully-differential ring VCO is locked 320㎒, the jitter and phase noise measured 26㎰ (rms), 157㎰ (p-p) and -97.09㏈ at 100㎑ offset. We introduce and analysis the conditions in which ring VCO can oscillate for low-power operation.
광수신기를 위한 2.5Gbps CMOS Transimpedance 증폭기 설계
전지호(J. H. Jeon),이은영(E. Y. Lee),심상미(S. M. Sim),박강엽(K. Y. Park),전석희(S. H. Jeon),유종근(C. G Yu) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.10
요즘 데이터의 양이 많아지고 마이크로프로세서의 속도가 빨라짐에 따라 광통신이 각광받고 있다. 광통신이란 전류신호를 광 신호로 변환하여 송신하고 광섬유를 통해 전달된 광신호가 포토다이오드를 통해 전류신호로 변환되어 수신하는 통신방법이다. TIA는 이런 광통신의 수신부의 첫 단에 오는 블록으로서 전류신호를 사용가능한 전압신호로 바꾸어주는 역할을 한다. 본 논문에서는 포토다이오드의 커패시턴스 성분을 효과적으로 차단하고 노이즈 특성을 향상시킬 수 있는 방법을 제안하고, 1.8V 0.18um CMOS공정을 사용하여 2.5Gbps TIA 블록을 설계하였다.
사종엽(J. Y. Sah),유종근(J. G. Yu) 한국전산유체공학회 1999 한국전산유체공학회 학술대회논문집 Vol.1999 No.-
CAFPlot has been developed for visualizing a wide range of technical data. It offer 2D and 3D plot in a variety of formats.
광통신 응용을 위한 2.5Gbps CMOS CDR회로 설계
김태준(T. J. Kim),박진구(J. K. Park),이경호(K. H. Lee),차충현(C. H. Cha),유종근(C. G. Yu) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.10
본 논문은 0.18㎛ CMOS 공정을 사용하여 2.5Gb/s CMOS CDR을 설계하였다. CML type의 논리게이트를 이용하여 보다 높은 주파수의 대역의 데이터를 복원하기 위한 위상비교기(PD)와 PD의 up과 down신호를 지연없이 루프필터(LF)에 공급하기 위한 전하펌프(CP) 그리고 외부 스위치를 통해 VCO이득을 조성할 수 있는 링 타입의 VCO로 구성되었다. 또한 VCO의 부담을 줄이기 위하여 half-rate 클럭 테크닉을 사용하였다. Cadence tool을 사용하여 모의실험 및 layout을 하였다. VCO이득은 100㎒/V이고, 클럭 ritter는 rising일 때 27ps, falling일 때 32ps로 우수한 결과를 얻을 수 있었다. 테스트칩 제작은 매그나칩 0.18㎛ CMOS 공정을 이용하였다. 칩 사이즈는 PAD를 포함하여 850um×750um이다.
DTV 튜너 응용을 위한 광대역 저잡음 CMOS VCO 설계
김용정(Y. J. Kim),유지봉(J. B. Yu),고승오(S. O. Ko),김경환(K. H. Kim),유종근(C. G. Yu) 대한전기학회 2007 대한전기학회 학술대회 논문집 Vol.2007 No.10
Since the digital TV signal band is very wide (54~806㎒), the VCO used in the frequency synthesizer must also have a wide frequency tuning range. Multiple LC VCOs have been used to cover such wide frequency band. However, the chip area increases due to the increased number of integrated inductors. In this paper, a scheme is proposed to cover the full band using only one VCO. The RF VCO block designed using a 0.18㎛ CMOS process consists of a wideband LC VCO, five divide-by-2 circuits and several buffers. The simulation results show that the designed circuit has a phase noise at 10㎑ better than -87㏈c/㎐ throughout the signal band and consumes 10㎃ from a 1.8V supply.
윤은정(E. J. Yoon),장기영(K. Y. Jang),박해인(H. I. Park),전지호(J. H. Jeon),박종태(J. T. Park),유종근(C. G. Yu) 대한전기학회 2010 정보 및 제어 심포지엄 논문집 Vol.2010 No.10
Nowadays energy harvesting technology using the light, I hear, vibration, and others is growing day by day. Since the harvested power is as low as about ㎼~㎽, the energy produced by energy harvesting should be managed it effectively. In this paper, power management unit(PMU) for a self-powered system based on solar energy is simply designed using the active/sleep scheme for low energy consuming wireless systems. An LDO and a temperature sensor are also designed to verify the operation of PMU.