http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
VC-Merge Capable ATM Switch의 버퍼용량 축소에 관한 연구
유정욱,조양현,오영환 한국통신학회 2001 韓國通信學會論文誌 Vol.26 No.6
레이어2 스위칭과 레이어3 라우팅의 통합 모델로써 MPLS(Multi-Protocol Label Switching) 환경에서 ATM LSR(Label-Switching Routers)은 백본망에서의 고속 전송이 가능하여 현재의 라우터 구조로써 제안되어지고 있다. MPLS가 코어 라이터로써 적용이 될 경우 확장성을 위해 label merging이라는 기술이 필요하다. VC(Virtual Circuit) merging은 ATM LSR에서 많은 IP 라우터를 하나의 라벨로 매핑을 시키며 수천 개의 목적지에 전송할 수 있는 확장성 있는 매핑 기술이다. VC merging은 같은 목적지인 다른 패킷들 간의 셀들의 섞임을 방지하기 위해 재 조합 버퍼가 요구된다. 재 조합 버퍼 사용시 일시적인 체증 현상이 발생하며 Non-VC merging과 비교시 많은 셀 손실과 많은 버퍼를 요구하게 된다. 본 논문에서는 RED(Random Early Detection) 알고리즘을 적용하여 VC merging이 필요한 버퍼의 요구량과 셀 손실을 줄였다.
유정욱 ( Yu Jeong Ug ),추교열 ( Chu Gyo Yeol ),노선균 ( No Seon Gyun ),김태영 ( Kim Tae Yeong ),조성용 ( Jo Seong Yong ),김승재 ( Kim Seung Jae ) 한국공업화학회 2003 공업화학 Vol.14 No.6
수용액 중의 말토올리고당을 각 당별로 분리하기 위한 기초연구로서 두 종류의 활성탄을 이용한 고정층 흡착탑에서 말토올리고당의 흡착 및 탈착 특성을 연구하였다. 야자각을 원료로 하여 제조한 활성탄 (SLS103)에서는 분자량이 작은 G1 (glucose), G2 (maltose), G3 (maltotriose)가 분자량이 큰 G5 (maltopentaose), G7 (maltoheptaose)보다 파과곡선이 늦게 형성되었다. 역청탄을 원료로 하여 제조한 활성탄 (F400)에서는 분자량이 큰 G5 (maltopentaose), G7 (maltoheptaose)가 분자량이 작은 G1 (glucose), G2 (maltose), G3 (maltotriose)보다 파과곡선이 늦게 형성되었다. SLS103과 F400을 이용한 말토올리고당의 흡착은 pH가 증가함에 따라 파과시간도 증가하였다. SLS103을 이용한 말토올리고당의 흡착은 pH 2.3일 때 거의 이루어지지 않았으며, pH 3.1에서는 pH를 조절하지 않았을 때와는 반대로 분자량이 작은 당들의 파과가 일찍 형성되었다. F400은 분자량이 큰 당들의 파과가 먼저 형성되었으며 pH가 증가할수록 파과가 이루어지는 시간도 증가하였다. 5, 10, 25, 50% ethanol 수용액을 사용한 연속적인 말토올리고당의 탈착은 ethanol 수용액의 농도가 높아짐에 따라 분자량이 작은 당에서 큰 당의 순서로 탈착이 진행되면서 각 당들이 부분적으로 분리되었다. The adsorption and desorption characteristics of maltooligosaccharides onto two commercially available activated carbons were studied experimentally in a fixed bed to obtain basic data for the separation of a sugar from oligosaccharides solution. The breakthrough curves of smaller molecules such as (G1) glucose, (G2) maltose and (G3) maltotriose for coconut shell based activated carbon, SLS103, were achieved later than those of larger molecules. On the other hand, the adsorption breakthrough curves of larger molecules such as (G5) maltopentaose and (G7) maltoheptaose for pitch coal based activated carbon. F400, were attained later than those of smaller molecules. Adsorption breakthrough time of maltooligosaccharides using F400 and SLS103 increased with increasing pH. The adsorption of maltooligosaccharides using SLS10.3 showed no adsorbtion at at pH 2,3, but the breakthrough curves of smaller molecules came faster than those of larger molecules at pH3.1. The breakthrough curves of larger molecules came faster than those of smaller molecules onto F400 and the breakthrough time increased with increasing pH. The desorption of maltooligosaccharides using ethanol (5, 10, 25, 50%) in a fixed bed was in the order of small to large molecule sizes, and more sugar was separated as ethanol concentration increased.
큐브위성 임무를 위한 테이프 스프링 힌지의 비선형 거동 분석 및 실험
유정욱(JeongUk Yoo),임병욱(Byeong-Uk Im),신상준(SangJoon Shin) 한국항공우주학회 2019 韓國航空宇宙學會誌 Vol.47 No.10
본 연구에서는 최근 다양한 큐브위성 임무에 사용되는 테이프 스프링 힌지의 거동 해석을 수행하였다. 테이프 스프링은 곡선 단면을 갖는 직선형의 얇은 스트립이며 곡률에 따라 달라지는 강성변화로 인해 비선형성이 강하게 발생한다. 이전 연구에서 제시된 회전-모멘트 선도 모델을 바탕으로 테이프 스프링의 거동 특성을 분석하였으며, 시중에 판매되는 상용 테이프 스프링 형상을 정확하게 모사하여 ABAQUS 수치 해석을 진행하였다. 테이프 스프링을 굽히는데 소요되는 최대 모멘트를 예측하였으며 단면의 원호각이나 두께 등의 변화에 따른 파라미터 스터디를 수행하였다. 또한 간략한 실험을 통해 수치해석 결과를 비교 검증하여 보다 정밀한 큐브위성 동적 거동 해석을 위한 향후 연구 방향을 제시한다. This paper explores an implementation of finite element analysis and experiment in the design process of a tape spring hinge used for various CubeSat missions. Tape spring hinges consist of short-length hardened-steel strips with one-sided curvature, and thus the behavior is subject to large deformation with unpredicted non-linearity. Precise dimensions of a commercial tape spring are traced by the use of high-resolution digital camera, and thin-shell FEM analysis is conducted using ABAQUS program. Based on the rotation-moment analysis suggested in previous studies, parametric analysis is conducted by adjusting the contributing factors such as strip thickness and the subtended angle of the cross section. Finally the behaviors are investigated by both analytical and non-linear finite element methods, and the results are compared with the simple measurements. Further studies suggest a possible application in dynamic characteristics of hinges during CubeSat operations.
Positive형인 Naphthoquinone Diazide 유도체의 감광특성
강경묵,이수영,유정욱 서울産業大學校 1997 논문집 Vol.45 No.1
naphthoquinone - 1,2 - diazide -5- sulfony1[NQDA] derivatives members of quinone diazide compound that are utilizable as photosensitive polymer material were synthesized, and photoresist were prepared by mixing these derivatives with m - cresol novolak(a matrix resin) at various weight ratios. Photosensitive characteristics of photoresist were studied by examining UV and IR, relative sensitivity using a Gray scale method, and SEM to analyze if they can be used as photosensitive material in printing process. Experimental results showed that, by UV, NQDA derivatives were photoconverted and developer - soluble photoresist were produced. The mixing ratio of 1 :4(by mass) of NQDA + p-hydroxybenzophenone+sensitizer and m - cresol novolak gave rise to the highest dissolution rate. In addition, photoresist obtained at this condition resulted in the most superior sensitivity and contrast.
이수영,강경묵,유정욱 서울産業大學校 1997 논문집 Vol.45 No.1
Generalized treatment of the polyprotic cation potentiometric titration curve has been carried out by a bisection technique. In this work a forth-degree polynomial in proton, which in involves the equilibrium constants for the complex metal cation titration reation has been developed. The curves are simulated for various equilibrium constant and proton concentration. The effects on the plot of errors in pH and in the K constant and the ways of pH calculation are discussed, together with ways of optimizing the pH calculation .
공동주택 창호와 구조체 접합부 결로 개선을 위한 기초적 연구
유정욱 ( Yoo Jeong-wook ),안대웅 ( An Dae-woong ),최용준 ( Choi Yong-jun ),박정근 ( Park Jung-geun ),지승구 ( Ji Seung-gu ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.1
최근 3년간 하자심사 · 분쟁조정위원회에 접수된 하자심사 사건 중 창문틀 및 문짝공사의 비율은 약 16%이고 이 중 결로 관련 사건의 비율은 약 43%이다. 특히 창호와 구조체의 접합부에서 발생하는 결로는 설계 기법과 시공 공법의 변화를 통한 개선의 여지가 크다고 볼 수 있으며 이에 대한 개선방안을 제안하였다.