http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
우유미,송종관,조규만,이현종,홍태훈,현창택,구교진,Woo, Yu-Mi,Song, Jong-Kwan,Cho, Kyu-Man,Lee, Hyung-Jong,Hong, Tae-Hoon,Hyun, Chang-Taek,Koo, Kyo-Jin 한국건설관리학회 2007 건설관리 : 한국건설관리학회 학회지 Vol.8 No.4
Recently, in the korean construction industry, the importance of cost management in the building design process has been grown up institutional systems and policies for the cost management of design stages are however weakness. Traditionally, the range of cost management has been limited to the construction stages, and due to inefficiency of the infrastructure such as standards and building cost data for cost management. It has trouble to perform the cost management in building design process. This study intends to derive key influence factors for raising efficiency of cost management. With questionnaire surveys to professionals, we analyze a current situations and the influence of obstacle factors on cost management. Finally, the key influence factors are induced, based on the result of the analysis on influence the obstacle factors. 최근 건설 사업에서 시공이전단계인 설계단계 공사비관리의 중요성이 대두되고 있지만, 설계단계 공사비관리를 위한 제도적 장치나 기술수준은 외국에 비해 매우 낙후되어 있다. 전통적으로 건설 사업에서 공사비관리는 시공단계에 국한되어, 설계단계 공사비관리를 위한 기본 틀과 분류 표준, 공사비 데이터 등 인프라가 부족하여 설계단계 공사비관리 업무를 수행하는데 있어 한계가 있다. 따라서 본 연구에서는 국내 설계단계에서 공사비관리가 효율적으로 수행되기 위해 관리되어야 할 주요 영향요인을 도출하고자 하였다. 설계실무자를 대상으로 설문조사를 통해 설계단계 공사비관리 현황과 문제점을 분석하였고, 설계단계 공사비관리 저해항목에 대해 공사비관리 업무에 미치는 영향도를 조사하였다. 요인분석을 통해 5개의 설계단계 공사비관리 주요 영향요인을 도출하여 향후 설계단계 공사비관리 지원도구 및 제도적 기반 구축에 기여할 수 있도록 하였다.
플래시 기반 유기금속화합물 열처리를 통한 고성능 유연 전극 제조
우유미,이동규,황윤식,허재찬,정성민,조용준,박귀일,박정환 한국전기전자재료학회 2023 전기전자재료학회논문지 Vol.36 No.5
Flash lamp annealing (FLA) of metal nanoparticle (NP) ink has provided powerful strategies to fabricate highperformance electrodes on a flexible substrate because of its rapid processing capability (in milliseconds), low-temperature process, and compatibility with to roll-to-roll process. However, metal NPs [e.g., gold (Au), silver (Ag), copper (Cu), etc.] have limitations such as difficulty in synthesizing fine metal NPs (diameter less than 10 nm), high price, and degradation during ink storage and FLA processing. In this regard, organometallic ink has been proposed as a material that can replace metal NPs due to their low-cost (usually 1/100 times cheaper than metal nano inks), low-temperature processability, and high material stability. Despite these advantages, the fabrication of flexible electrodes through FLA treatment of organometallic compounds has not been extensively researched. In this paper, we experimentally guide how to determine the optimal conditions for forming electrodes on flexible substrates by considering material parameters, and flashlight processing parameters (energy density, pulse duration, etc) to minimize the difficulties that may arise during the FLA of organometallic ink. 금속 나노 입자의 플래시 램프 어닐링 공정은 빠른 가공 속도(밀리초 단위), 저온 공정, 롤투롤 공정과의 호환성 등 이유로 유연한 기판 위에 고성능 전극을 제조하기 위한 강력한 솔루션으로 제공되어 왔다. 그러나 금속 나노 입자[예를 들면,금(Au), 은(Ag), 구리(Cu) 등]는 저온 공정을 위한 미세 금속 나노 입자(직경 10 nm 미만)의 제조가 어렵고, 고가이며, 잉크 보관 및 플래시 램프 어닐링 과정에서 산화가 발생하는 등의 한계가 존재했다. 이러한 이유로 유기금속화합물 잉크는 금속 나노 입자를 대체할 수 있는 재료로서 저렴한 가격(기존 금속 나노 잉크 대비 1/100의 가격)과 저온 공정성, 높은 재료 안정성으로 인해 제안되었다. 하지만 이러한 장점에도 불구하고, 유기금속화합물의 플래시 램프 어닐링 처리를 통한 유연한 전극의 제조는 광범위하게 연구되지 않고 있다. 본 논문에서는 사전 경험 없이 은 유기금속화합물을 플래시 램프 어닐링하는 과정에서 발생할 수 있는 어려움을 최소화하기 위해 재료 매개변수와 플래시광 처리 매개변수(에너지 밀도, 펄스 지속시간 등)를 고려하여 유연 기판에 전극을 제조하기 위한 최적의 조건을 결정하는 방법을 실험적으로 가이드하고자 한다.