http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
융모성질환에 있어서 혈청 α-FP 및 β-hCG에 관한 연구
오성택,윤영돈 대한산부인과학회 1990 Obstetrics & Gynecology Science Vol.33 No.2
전남대학교 의과대학부속병원 산부인과에서 내원한 임신 519주사이의 정상임부 80명과 무월경 주수가 정확한 융모성질환 38예의 각 주수별 혈청 α-FP, β-hCG 및 β-hCG/α-FP치를 비교한 결과 다음과 같은 결론을 얻었다. 1. 혈청 α-FP치에서는 융모성질환이 정상임부보다 8주이후에서 통계학적으로 의의있게 낮았다(p $lt; 0.01). 2. 혈청 β-hCG치는 융모성질환이 정상임부보다 임신 8~11주에서는 통계학적으로 유의한 차가없고, 6주,7주 및 12주이후에서 의의있게 높았다(P$lt;0.05). 3. β-hCG/α-FP치는 융모성질환이 정상임부보다 임신 6주이후에서 통계학적으로 의의있게 높았다(P$lt;0.05). 이와같은 결과로 임신 6주이후 혈청 α-FP을 혈청 β-hCG와 같이 측정하므로써 융모성질환의 진단에 도움을 줄수있을 것으로 사료되었다. This study was performed for the early diagnosis of trophoblastic disease (TRD) by the measurement of serum -fetoprotein (α-FP) and -human chorionic gonadotropin (β-hCG). Serum α-FP, β-hCG levels were respectively measured by enzyne immunoassay (EIA), radioimmunoassay (RIA). The 38 cases with TRD were compared with 80 cases in normal pregnancy at 5- to 19 weeks of gestational period by measurement of α-FP, β-hCG and β-hCG/α-FP. The following results were obtained: Serum α-FP levels of cases with TRD were significantly lower than those of normal pregnancy at 8- to 19 weeks of gestational period (p $lt; 0.01). Serum β-hCG levels of cases with TRD were significantly higher than those of normal pregnancy at 6th, 7th and after 12th gestational week, while not at 8- to 11 weeks of gestational period (p $lt; 0.05). β-hCG/α-FP ratio of cases with TRD were significantly higher than those of normal pregnancy after the 6th gestational week (p $lt; 0.05). In conclusion, it is suggested that the measurement of serum α-FP and β-hCG after 6th gestational week may be valuable for the early diagnosis of TRD.
3 차원 회로 장치 제작을 위한 FDM 기반의 통합 시스템 개발
오성택,이인환,김호찬,조해용 대한기계학회 2014 大韓機械學會論文集A Vol.38 No.8
It is possible to fabricate a three-dimensional (3D) shape using the solid freeform fabrication (SFF) technology. However, there are several problems in applying conventional SFF technologies to the direct manufacturing of a product. Hence, multimaterial SFF is gaining attention. Moreover, a 3D circuit device that is different from a conventional two- dimensional PCB can also be fabricated using multimaterial SFF. In this study, a hybrid system using fused deposition modeling and direct writing was designed for 3D circuit device fabrication. 임의형상 제작기술을 이용하면 원하는 형상을 빠르게 제작할 수 있다. 하지만 임의형상 제작기술을 직접 제품을 생산하기 위한 제조기술에 적용하기 위해서는 문제점들이 있다. 이에, 하나의 대안으로써 다중재료 임의형상 제작기술이 주목 받고 있다. 특히 다중재료 임의형상 제작기술을 이용하면 기존의 2 차원 PCB 와는 다른, 회로 소자의 배열 및 외부 형상의 제약이 적은 3 차원 회로 장치를 제작 할 수 있다. 본 연구에서는 3 차원 회로 장치 제작을 위하여 FDM 방식과 직접주사 방식을 통합한 장치를 설계하고, 이 장치를 이용하여 3 차원 회로장치를 제작하였다. 즉, LED 와 조도센서를 이용한 3 차원 회로 장치를 제작하여 작동을 확인하였으며, 자동화된 3 차원 회로 장치의 제작을 위한 임의형상 제작 기술과 직접주사 기술이 통합된 시스템 개발에 대한 기초연구를 수행하였다.