http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
여승준,Ramchandra Balaji Pode,김화민,안정선 한국물리학회 2009 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.55 No.1
In the present paper, results on the polymerization of C60 in benzene-ethanol mixtures are reported. The photoluminescence (PL) of the C60 aggregates prepared by using two different methods was investigated using PL spectroscopy. In the case of benzene-ethanol mixtures of different compositions with ethanol volume fractions less than 50% in the solvent mixture, the PL spectra showed the spectral shape of aggregates at 120 K. The change in the spectral shape of the PL emission due to the formation of C60 aggregates at the liquid-solid transition temperature of the solvent mixture as in case of a single solvent (benzene, toluene, or CS2) is reported. A shift in 0-0 transition energy to a high-energy compared with the C60 crystal was noticed. The 0-0 transition energy for a high ethanol volume fraction (>70%) of the solvent mixture showed no shift and was located at almost the same region as that of the C60 crystal PL spectrum. A significantly big size of C60 aggregates in a mixture of benzene-ethanol with a high ethanol volume fraction compared to that of C60 aggregates in a single solvent (>2.3 nm in benzene) is reported. Furthermore, the high-resolution transmission electron microscopy (HRTEM) image of a C60 cluster produced by irradiating C60 aggregates with on UV pulse-laser reconfirmed these results.
그래핀/탄소나노튜브(FCN) 첨가에 따른 Polyamide-Nylon 6의 기계적 특성에 미치는 영향
여승준 ( Seung-jun Yeo ),신해름 ( Hae-reum Shin ),노우승 ( Woo-seung Noh ),김만태 ( Man-tae Kim ) 한국산업융합학회 2023 한국산업융합학회 논문집 Vol.26 No.6
Research on enhancing the mechanical strength, lightweight properties, electrical conductivity, and thermal conductivity of composite materials by incorporating nano-materials is actively underway. Thermoplastic resins can change their orm under heat, making them highly processable and recyclable. In this study, Polyamide-Nylon 6 (PA6), a thermoplastic resin, was utilized, and as reinforcing agents, fused carbon nano-materials (FCN) formed by structurally combining Carbon Nanotube(CNT) and Graphene were employed. Nano-materials often face challenges related to cohesion and dispersion. To address this issue, Silane functional groups were introduced to enhance the dispersion of FCN in PA6. The manufacturing conditions for the composite materials involved determining the use of a dispersant and varying FCN content at 0.05 wt%, 0.1 wt%, and 0.2 wt%. Tensile strength measurements were conducted, and FE-SEM analysis was performed on fracture surfaces. As a result of the tensile strength test, it was confirmed that compared to pure PA6, the strength of the polymer composite with a content of 0.05 wt% was improved by about 60%, for 0.1 wt%, about 65%, and for 0.2 wt%, the strength was improved by 50%. Also, when compared according to the content of FCN, the best strength value was shown when 0.1 wt% was added. The elastic modulus also showed an improvement of about 15% in the case of surface treatment compared to the case without surface treatment, and an improvement of about 70% compared to pure PA6. Through FE-SEM, it was confirmed that the matrix material and silane-modified nanomaterial improved the dispersibility and bonding strength of the interface, helping to support the load evenly and enabling effective stress transfer.
여승준(Seung-Jun Yeo),김창중(Chang-Joong Kim),허서원(Seo-Weon Heo),이호경(Ho-Kyoung Lee) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.11
본 논문은 MIMO 시스템에서, 두 심볼을 묶어서 전송함으로써 최대 전송률을 유지하는 준직교 시공간 블록 부호 (QOSTBC : quasi orthogonal space time block codes)의 성능을 분석하였다. QOSTBC의 전송 신호를 다차원 신호공간의 성상으로 생각하여 신호를 설계하고, 제안된 신호들의 성능을 분석하였다. 또한 다양한 신호 성화에 대하여 분석한 성능을 모의실험 결과와 비교를 통해 성능분석의 타당성을 입증하였다.
풀러렌의 광중합 반응에 의해 생성된 나노 구조체의 나노 사이즈 효과
여승준(Seung Jun Yeo),박소라(Sora Park),차정옥(Jeong Ok Cha),신진호(Chin Ho Shin),안정선(Jeung Sun Ahn) 한국생산제조학회 2007 한국공작기계학회 춘계학술대회논문집 Vol.2007 No.-
상온~120K의 온도 영역에서 단일 용매(톨루엔, 벤젠, CS₂)에 녹인 fullerene(C??) 분자의 photoluminescence(PL) 스펙트럼을 측정하여 분석한 결과, C?? 분자가 용액의 액체-고체 상변이 과정에서 aggregates을 형성함을 확인하였으며, 이때 형성된 aggregates는 van der Waals 힘에 의한 약한 결합으로 이루어져 있다는 사실을 확인하였다. 또한 상온에서의 혼합 용액(벤젠-에탄올) 중의 C?? 분자의 PL 스펙트럼을 용매의 혼합비를 바꾸어 측정하여, 혼합비에 따른 PL 스펙트럼 형태의 급격한 변화가 C?? aggregates의 형성에 기인함을 알 수 있었다. 혼합용액에서 aggregates의 사이즈가 단일 용매의 액체-고체 상변이 과정에서 생성된 aggregates의 사이즈 비에 훨씬 큰 사이즈를 갖고 있음을 밝혔으며, 이러한 결과는 이들 C?? aggregates에 레이저를 조사하여 광중합반응을 일으킨 후의 고 분해능 투과형 전자 현미경(HRTEM)에 의한 관측 결과와도 일치하였다. 이들 결과는 플러렌의 광중합 반응에 의하여 형성된 새로운 나노 구조체에서의 강한 백색 발광이 내부에 형성된 3차원적인 공유결합의 네트워크로부터 기인한 나노 사이즈 효과임을 시사한다.
다차원 신호 공간에서 그룹 준직교 시공간 블록 부호의 신호 설계
여승준(Seung-Jun Yeo),허서원(Seo-Weon Heo),이호경(Ho-Kyoung Lee) 대한전자공학회 2008 電子工學會論文誌-TC (Telecommunications) Vol.45 No.3
본 논문은 MIMO 시스템에서, 최대 전송률을 유지하면서 최대 다이버시티를 갖는 준직교 시공간 블록 부호 (QO-STBC : quasi orthogonal space time block codes)를 다차원 신호 공간에서 설계한다. QO-STBC 부호기 중 원형심볼(based-symbols)을 두 개의 신호 쌍으로 묶어서 변형된 새로운 신호를 전송하는 방식을 grouping QO-STBC 라고 한다. 이러한 grouping QO-STBC의 최대 다이버시티 조건을 기하학적으로 살펴보고, 다차원 신호 공간에서 신호를 설계하는 방법을 제안한다. 또한 다양한 신호 성상에 대하여 설계한 부호기의 성능을 분석하고 전산 모의실험을 통하여 성능분석의 타당성을 입증한다. This paper proposes the signal design techniques of quasi-orthogonal space time block codes (QO-STBCs) on the multi-dimensional signal space. In the multiple antenna system(MIMO), QO-STBC achieves the full-diversity and full-rate by grouping two based-symbols. We study the condition for the full-diversity of the grouping QO-STBC geometrically and the performance analysis of codes on the multi-dimensional signal space regarding the various signal constellations. Simulation results show that the way of the performance analysis is validity.
Ar가스 분위기에서 PLD방법으로 제작된 TiNi박막의 조성 및 결정성에 관한 연구
차정옥,신진호,여승준,안정선,남태현,Cha, J.O.,Shin, C.H.,Yeo, S.J.,Ahn, J.S.,Nam, T.H. 한국진공학회 2007 Applied Science and Convergence Technology Vol.16 No.2
Ti-50 at. % Ni 합금 타깃으로 PLD(pulsed laser deposition)방법을 사용하여 TiNi 형상기억합금 박막을 제작하였다. Ar분위기(200 mTorr)와 고진공분위기($5{\times}10^{-6}\;Torr$)에서 제작한 TiNi 박막의 조성 및 결정성의 변화를 조사했으며, 박막의 조성은 에너지 분산 엑스선 분광 분석(EDXS)을 이용하여 조사하였고, 박막의 결정성은 엑스선 회절장치(XRD)를 이용하여 조사하였다. 박막의 조성은 기판과 타깃의 거리에 의존되었지만, 기판의 온도와는 무관함을 알 수 있었으며, Ar 분위기에서 플룸 안쪽에 기판이 위치하였을 때 조성 제어가 용이함을 알 수 있었다. 또한, Ar 가스 분위기에서 증착 된 TiNi 박막은 고진공분위기에서 증착된 박막보다 더 낮은 온도(약 $400^{\circ}C$)에서 in situ로 결정화됨을 알 수 있었다. 이들 결과는, PLD방법으로 TiNi 형상기억합금 박막을 제작할 때 분위기 가스의 압력이 결정화 온도를 낮추어 주는 중요한 역할을 할 수 있음을 시사한다. TiNi shape memory alloy(SMA) was fabricated by PLD(plused laser deposition) using equiatomic TiNi target. Composition and crystallization of TiNi thin films which were fabricated in ambient Ar gas(200m Torr)and vacuum($5{\times}10^{-6}\;Torr$) were investigated. Composition of TiNi thin films was characterized by energy-dispersive X-ray spectrometry (EDXS) and crystallization was confirmed by X-ray diffraction (XRD). The composition of films depends on the distance between target and substrate but does not sensitively depend on the substrate temperature. It is found that the composition of films can be easily controlled when substrate is placed inside plume in ambient Ar gas. It is also found that the in situ crystallization temperature ($ca.\;400^{\circ}C$) in ambient Ar gas is lowered in comparison with that of TiNi film prepared under vacuum. The low crystallization temperature in ambient Ar gas makes it possible to prepare the crystalline TiNi thin film without contamination.