http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A Proposed Minimum Cover for Corrugated Metal Pipe-Arch Culverts
여경윤,Yeau, Kyong-Yun The Korean Society of Agricultural Engineers 2010 한국농공학회논문집 Vol.52 No.4
본 논문의 주된 목적은 농업용 이동로 또는 농업용수의 공급을 위하여 사용되는 파형 강판 파이프아치 암거가 고속도로 및 지방국도를 통과할 때 설계 및 시공 시 요구되는 최소 토피 두께를 제안하는데 있다. 1998년 이후 농업용 목적으로 사용되는 파형 강판 암거는 서해안 고속도로의 건설과 더불어 그 수요량이 증가하였으며, 이에 따른 설계 및 시공의 빈도수 또한 지속적으로 증가하고 있는 추세이다. 그러나 이를 뒷받침 할 수 있는 국내 규정은 아직 미약한 실정이다. 따라서 본 연구에서는 파형 강판 암거의 설계 및 시공 시 고려해야 할 가장 중요한 인자 중 하나인 최소 토피에 대한 연구를 수행하고 그 두께를 제안하였다. 현재 국내 및 미국에서 사용되고 있는 최소 토피 두께는 암거의 스판 길이 또는 스판 길이와 암거의 높이 비율의 관계로부터 정해지는 것으로 구조적인 특성치를 포함하고 있지 않다. 제안된 최소 토피 두께는 암거의 형상적 특성, 설계 하중, 강판의 구조적특성과 손상 등을 반영하여 파형 강판 암거의 안전성을 극대화 하였다. 제안된 토피 두께는 미국과 국내 도로공사에서 규정하고 있는 토피 두께와 비교 분석하였으며, 그 결과 국내 규정이 더욱 안전성을 고려하고 있음을 알 수 있었다.
알카리성부여제를 사용한 지하구조물의 중성화 회복효과에 관한 실험적 연구
여경윤 ( Yeau Kyong Yun ),김종길 ( Kim Jong Kil ),김문겸 ( Kim Moon Kyum ),임윤묵 ( Lim Yun Mook ) 한국구조물진단유지관리공학회 2001 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.5 No.1
In generally, amount of alkali in cementious material greatly affect the durability of concrete structure. In this study, alkalization recovery effect of carbonated underground structures due to penetrated alkalization agent is investigated. Tests were conducted to investigate the alkali recovery effect on existing underground structures. Various carbonated underground structures, such as sewer system, subway etc., were selected and applied with several finishing materials. Results indicate that the concrete structure covered with cement paste and corrosion inhibitory paste show better alkali recovery effect than that of alkalization agent and repellent paint.
김동원,여경윤,송석환,김진국 한국강구조학회 2024 韓國鋼構造學會 論文集 Vol.36 No.1
In this study, stainless steel (STS) lining support frame capable of absorbing unexpected deformation occurring during STS lining construction and operation was developed and compared with the conventional support frame in terms of structural performance such as fatigue and energy absorption capacity. Stress distributions from finite element analysis were examined to analyze potential failure locations due to stress concentrations in the support frames. Through cyclic loading experiments, failure locations and fatigue failure cycles were compared, and energy absorption capacity was calculated. Furthermore, comparative buckling analysis for frame bar elements was conducted for the comparison of buckling performance. Fatigue performance and energy absorption capacity of the support frame were enhanced through improved welding details and changes in geometric shape. 이 연구에서는 STS 라이닝의 시공 및 운용 중 발생하는 예측하지 못한 변형을 흡수할 수 있는 STS 라이닝 지지구조를 개발하였고, 기존 지지구조와 구조성능을 비교하였다. 유한요소해석을 통해 지지구조별 응력분포 특성과 응력집중 위치를 비교·분석하였다. 반복가력실험을 통해 실제 파단 발생 위치와 피로파단 가력횟수, 에너지 흡수능력을 비교하였다. 나아가, 좌굴해석을 수행하여 좌굴모드와 임계 좌굴하중을 구하여, 좌굴성능을 비교하였다. 용접상세 개선 및 기하학적 형상 변경을 통해 지지구조의 피로성능과 에너지 흡수능력이 개선된 것을 확인하였다.
이중 패널 벽체구조 무도류벽 원형 물탱크의 보강 및 구조 상세에 따른 거동특성 분석
허서진,여경윤,김진국 한국강구조학회 2023 韓國鋼構造學會 論文集 Vol.35 No.2
The purpose of this study is to analyze behavior characteristics according to structural details based on FEM analysis for optimal design of a circular water tank with double panel wall. Design seismic load and distribution of hydrodynamic pressure from design codes are investigated in order to determine a proper application to the seismic design of the circular water tank. Based on the full-scale FEM analysis using shell elements, the influence of X-bracing and L-angle stiffener are investigated. From the numerical analysis, it is confirmed that using the X-bracing at the upper wall and the L-angle stiffener at the outer lower wall is more efficient to reinforce the tank. In addition, for the same capacity, the change in the behavior of the wall according to the spacing between interior and exterior walls is negligible. The inner wall, which hydrostatic pressure is balanced inside and outside, is exposed to buckling due to the hydrodynamic pressure in compression direction, and reinforcement details using the L-angle stiffener are proposed. 이 연구는 이중 패널 벽체구조 원형 물탱크의 최적 설계를 위해 FEM 해석을 기반으로 보강 상세에 따른 거동 분석을 목표로 한다. 이중 패널 벽체구조 원형 물탱크의 내진설계를 위해 내진하중 산정 및 동수압의 분포를 정립하였으며, 이를 기반으로 실제규모의 shell 요소 기반 유한요소해석모델을 구축하였다. 벽체 보강재인 X 브레이싱의 설치 상세에 따른 거동 분석을 기반으로 최적설치 형태를 제시하였으며, L-앵글의 설치 간격에 따른 외벽 거동을 분석하였다. 또한, 이중 패널 벽체구조 원형 물탱크에서 정수압이안팎으로 상쇄되는 내벽은 압축 방향 동수압에 의해 좌굴 위험에 노출됨에 따라, L-앵글을 사용한 내벽 좌굴 보강안을 제안하였다.