http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
세계측지계 전환에 따른 지적측량의 거리 및 면적 변화 연구
양철수(Yang, Chul Soo),양근우(Yang, Geun Ou) 한국지적학회 2012 한국지적학회지 Vol.28 No.2
지적측량성과의 세계측지계 전환과 관련하여 지적측량의 거리 및 면적 변화를 고찰하였다. 종래의 지역측지계 지적측량성과를 세계측지계로 전환하면, 측량계산의 기준이 되는 지오이드면과 타원체면의 차이, 평면투영계산의 차이에 기인하여, 지적측량의 점간거리는 우리나라 중부에서 8ppm, 남부에서 4ppm의 비율로 줄어든다. 이 값은 지역측지계와 세계측지계간의 좌표변환방법을 적용하여 구한 점간거리의 비교에서도 동일하게 산출된다. 면적으로 환산하면 중부지방의 경우 최대 16ppm의 비율로 줄어든다는 결과이다. 그러나, 기타원점계열의 경우에는 평면투영의 원점좌표가 크게 달라지는 영향에 의해, 세계측지계상 지적측량의 점간 거리가 도리어 늘어나는 곳이 발생한다. 예를 들어, 망산원점계열 지역의 경우에는 30ppm의 비율에 달한다. Changes in distance and land area by cadastral surveying are investigated for World Geodetic System. Between the local geodetic system and the World Geodetic System, there are differences in ellipsoid, reference surface of surveying and plane projection. And these differences cause the distance referenced to World Geodetic System will decrease as great as 8ppm ratio compared to the distance referenced to local geodetic system. However, it is remarkable that in some areas of locally specified plane projection system, the great eastward change of the projection origin causes distance increase as great as 30 ppm ratio for World Geodetic System.
GPS관측기선의 삼변망조정계산에 의한 우리나라 지적측량기준점의 베셀성과 산출
양철수(Yang Chul Soo),강상구(Kang Sang Gu),정래정(Jung Rea Jung),김용호(Kim Yong Ho),이민석(Lee Min Seok) 대한공간정보학회 2007 대한공간정보학회지 Vol.15 No.3
GPS 관측에 의해 구한 기선벡터를 이용하여 평면에서의 삼변망조정계산에 의하여 지적측량기준점의 베셀좌표를 산출하는 소프트웨어를 개발하고 우리나라 전역 지적측량기준점의 성과 통일에 활용하였다. GPS 관측점간의 기선 거리를 평면에 전개하는 데에는 PNU95 지오이드모델을 이용하여 지오이드면상의 거리를 산출하고, 다음으로 베셀 타원체상의 좌표에 바탕하여 구한 증대율을 적용하여 평면투영거리를 산출하였다. 우리나라 전역 지적측량기준점의 통일성과를 산출하는 데에는, 우선 자유망조정에 의해 전국 32개소 GPS상시관측소의 베셀좌표를 산출하고, 다음으로 이들 GPS상시관측소에다 지적측량기준점과 결합하는 망조정계산을 실시하였다. 그 결과 GPS 기선벡터를 이용 하여 현재의 지적기준점 성과를 정비할 경우 전국 어디에서나 점간거리 1ppm 이내에서 일치하는 베셀좌표의 결정이 가능하였다. In this study, the software to compute Bessel coordinates by trilateration adjustment was developed, and the software was used to determine coordinates of the cadastral control points over the southern Korean peninsula. The baseline measured by GPS was reduced to the distance on geoid surface by applying PNU95 geoid model, and the distance on geoid surface was reduced to the plane grid distance by applying scale factor of map projection of Bessel coordinates. Using the plane grid distance, Bessel coordinates of 32 CORS (Continuously Operating Reference Station) were computed by free adjustment at first, and then the coordinates of the cadastral control points were computed by joining the control points to adjacent CORS. The result shows a possibility of construction of highly accurate and consistent cadastral survey network with coordinate error less than 1ppm of distance, when newly computing the coordinates of the control points by using distances measured by GPS.
양철수(Yang Chul Soo),진중노(Jin Jung No) 대한공간정보학회 2008 대한공간정보학회지 Vol.16 No.3
통일원점과 구소삼각원점 계열의 성과가 혼재되어 있는 지역의 지적측량기준점에 대하여 GPS관측거리를 이용하는 삼변망조정계산 방법에 의하여 단일 원점계열의 성과를 산출하였다. 삼변망조정계산의 적용은 각 원점계열별로 성과가 상호 부합하는 점들을 추출하여 자유망조정을 실시하고, 다음으로 이들 자유망조정의 성과에다 나머지 점들을 연결하는 고정망조정계산에 의해 지역 내 모든 점들의 좌표를 산출하였다. 실제 계산은 인천광역시의 가리계열 18점, 계양계열 17점, 중부계열 33점 등의 원점계열별 기준점을 이용하여 지역 전체의 합계 68점의 기준점에 대한 단일 원점계열의 성과를 산출하였다. 새로이 산출한 각 원점계열의 좌표 간에는 정량의 방위각과 축척계수의 차이가 있고 수작업으로 이를 보정하는 계산에 의해서도 서로 다른 원점 계열의 근사 좌표 산출이 가능하였다. The coordinate of cadastral control points located over the area of different surveying origins is computed in a single surveying origin by trilateration adjustment of GPS baseline measurements. In every different surveying origins, wellmatched control points are selected and mutually coinciding coordinates are computed by free network adjustment. Then, the coordinate of the other control points over the area is computed by joining these points to the adjusted points. In practice, by using 18 points of Gari, 17 points of Gyeyang, and 33 points of Central origin in Incheon, the coordinates of total 68 points in every surveying origin are computed. Between the points of different surveying origins, it is found that there are quantitative differences in azimuth and scale factors, and the approximate point coordinate of other surveying origins is calculated by correcting the scale and azimuth.
지적재조사사업의 필지면적 차이를 최소화하는 조정계산 방법 연구
양철수(Yang, Chul-soo) 한국지적정보학회 2023 한국지적정보학회 학술발표대회 논문집 Vol.2023 No.12
지적재조사사업에서 필요로 하는 고품질의 연속수치지적도면 작성에 유용한 방법으로, 다량의 도면을 대상으로 도면에 등재된 모든 필지의 등록면적과 좌표면적의 차이가 최소로 되도록 경계점 좌표를 조정계산하는 방법을 개발하고 수치실험을 실시하였다. 최소제곱법에 의한 계산은 1회 계산으로 모든 필지에 대하여 공부면적과 좌표면적의 차이를 50% 감소시킬 수 있으며, n회 반복 수행함으로써 면적오차를 1/2<SUP>n</SUP> 만큼 감소시킬 수 있다. 따라서, 좌표 조정 단계의 반복적인 계산에 의해 좌표면적을 공부면적에 일치시킬 수 있다. 광역의 지역에 대해서는 경계점 좌표의 변동이 없는 고정점을 설정하여 지역을 구분하고, 구역별로 조정계산을 실시하여 연결함으로써 전지역에 걸쳐 연속된 수치지적도면을 작성할 수 있다.