http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
산업현장 추락에 대한 기계학습 알고리즘 기반의 다집단 분류
구범모(Bum Mo Koo),김종만(Jong Man Kim),남예진(Ye Jin Nam),성동진(Dong Jin Sung),심재우(Jae Woo Shim),양수민(Su Min Yang),김영호(Young Ho Kim) 대한기계학회 2022 大韓機械學會論文集A Vol.46 No.3
본 연구에서는 웨어러블 관성센서를 사용하여 산업현장 추락에 대한 기계학습 기반의 다집단 분류를 시도하였다. 20명의 건강한 성인 남성을 모집하였으며, 15가지 non-FFH 동작과 5가지 low-hazard-FFH 동작 그리고 한 가지 high-hazard-FFH 동작을 3회씩 반복 측정하였다. 5개의 기계학습 기법(SVM, k-NN, LDA, QDA, MLP)에 대하여 two-class 분류성능과 three-class 분류성능을 비교하였다. 분석 결과 SVM이 two-class 분류와 three-class 분류에서 각각 99.5%와 98.2%의 가장 높은 정확도를 보였다. 또한, 세 가지 전처리 기법들(SMOTE, min-max 정규화, univariant feature selection) 역시 알고리즘 성능 향상에 기여함을 볼 수 있었다. In this study, a multi-class classification of industrial fall from height (FFH) based on machine learning was tried using a wearable inertial sensor. Twenty healthy adult males were recruited for the experiment. The experiment protocol consisted of 15 non-FFH, five low-hazard-FFH, and one high-hazard-FFH. Each motion was conducted three times repeatedly. Two-class classification performance and three-class classification performance were compared for five different machine learning techniques (SVM, k-NN, LDA, QDA, and MLP). As a result, SVM showed the highest accuracy of 99.52% and 98.25% in two-class classification and three-class classification, respectively. In addition, the three preprocessing techniques (SMOTE, min-max regularization, and univariant feature selection) contributed to the improvement of algorithm performance.
최영민 ( Young Min Choi ),양수민 ( Su Min Yang ) 한국항공경영학회 2011 한국항공경영학회지 Vol.9 No.3
This study has intended to elicit the appropriate evaluation indicators of Special Tourism Zone in Korea. The method used for this study was content analysis, and 27 evaluation indicators in the country were selected for analysis. Analyses were conducted focusing on the type(Urban, Waterside, Hot spring, Mountain, Culture, Complex type) and basic elements(Tourism Planner, Infra structure, Inter structure, Superstructure) of Special Tourism Zone. The major findings of this study were as follows. 1) There is no relation between STZ`s type and indicator. An example for the Waterside type, Boryeong and Haeundae tourism zone are evaluated by different indicators. Meanwhile, Mt. Sorak(Mountain type) and Haeundae(Waterside type) are evaluated by same indicator. 2) There are some notable omissions and uneven distribution according to basic elements. To make up the basic elements, a delphi survey was conducted twice among 28 professionals. The proposed basic indicator elements will contribute in examining STZ`s basic factors. In addition, new evaluation indicators by the type should be developed.
Cu<sub>50</sub>-Fe<sub>50</sub> 합금의 제조 및 특성평가
이정일,딜리람,팽종민,조현수,양수민,류정호,Lee, Jung-Il,Lam, Dilli,Paeng, Jong Min,Cho, Hyun Su,Yang, Su Min,Ryu, Jeong Ho 한국결정성장학회 2018 한국결정성장학회지 Vol.28 No.4
구리 금속은 높은 열전도도로 heat sink 혹은 heat exchanger로 널리 사용되고 있다. 그러나 이에 반하여 낮은 인장강도와 사용온도 한계를 가지고 있다. 따라서 높은 열전도도, 낮은 제작비와 함께 우수한 기계적 특성이 요구된다. 본 연구에서는 이를 위하여 동철합금($Cu_{50}-Fe_{50}$ alloy)를 고주파 가열로를 이용하여 제조하고 그 특성을 조사하였다. 제조된 동철합금은 Cu, ${\alpha}$-Fe, ${\gamma}$-Fe 결정구조를 기진 dendrite 미세구조를 보여주었다. 제조된 동철합금은 XRD, FE-SEM, EDS 및 XRF를 이용하여 결정구조 및 미세구조를 분석하였으며 전력공급 접점용 소재로서의 적합성을 확인하고자 하였다. Copper is a well know material for use as heat sink or heat exchanger. However, copper has a considerable low tensile strength and temperature limit. A material that has a good thermal conductivity, low cost, but also excellent mechanical properties are desired. In order to identify the mechanism for the material properties of cast Cu-Fe alloys, $Cu_{50}-Fe_{50}$ (wt.%) alloy was produced by using a high-frequency induction furnace, a typical metal casting process. The Cu-Fe alloy consists of Cu, ${\alpha}$-Fe, ${\gamma}$-Fe with dendrite structures. The crystal structure and microstructure of the prepared $Cu_{50}-Fe_{50}$ alloy were systematically examined using XRD, FE-SEM, EDS and XRF for electrical devices.
Sn-3.0Ag-0.5Cu, Sn-0.7Cu 및 Sn-0.3Ag-0.5Cu 합금의 제조 및 특성평가
이정일,팽종민,조현수,양수민,류정호,Lee, Jung-Il,Paeng, Jong Min,Cho, Hyun Su,Yang, Su Min,Ryu, Jeong Ho 한국결정성장학회 2018 韓國結晶成長學會誌 Vol.28 No.3
솔더(solder) 재료는 수 천년 이상 인류 문명과 함께해온 대표적인 금속 합금으로서 현재까지도 전자 패키징(electronic packaging) 및 표면 실장(SMT, surface mount technology) 분야의 핵심 소재로 사용되고 있다 그러나 최근 Ag 가격의 급격한 상승과 전자산업의 저가격화 전략으로 인해 솔더 재료에서의 Ag 함량의 감소가 지속적으로 요구되고 있다. 본 연구에서는 Sn-3.0Ag-0.5Cu, Sn-0.7Cu 및 Sn-0.3Ag-0.5Cu(weight%) 조성의 무연납 솔더바 샘플을 주조법으로 합금화 하였다. 제조한 Sn-3.0Ag-0.5Cu, Sn-0.7Cu 및 Sn-0.3Ag-0.5Cu 샘플에 대한 결정구조, 화학조성 및 미세구조를 XRD, XRF, 광학현미경, FE-SEM 및 EDS 분석을 이용하여 조사하였다. 분석결과, 제조된 샘플은 ${\beta}-Sn$, ${\varepsilon}-Ag_3Sn$ 및 ${\eta}-Cu_6Sn_5$ 결정으로 구성되어 있었을 확인할 수 있었다. In the past few years, various solder compositions have been a representative material to electronic packages and surface mount technology industries as a replacement of Pb-base solder alloy. Therefore, extensive studies on process and/or reliability related with the low Ag composition have been reported because of recent rapid rise in Ag price. In this study, Sn-3.0Ag-0.5Cu, Sn-0.7Cu and Sn-0.3Ag-0.5Cu solder bar samples were fabricated by melting of Sn, Ag and Cu metal powders. Crystal structure and element concentration were analyzed by XRD, XRF, optical microscope, FE-SEM and EDS. The fabricated solder samples were composed of ${\beta}-Sn$, ${\varepsilon}-Ag_3Sn$ and ${\eta}-Cu_6Sn_5$ phases.
손정우(Son Jeong Woo),박정원(Park Jung Won),양수민(Yang Su Min),황인성(Hwang In Seong),김주섭(Kim Ju Sub) 한국HCI학회 2023 한국HCI학회 학술대회 Vol.2023 No.2
Falling In:은 복잡한 감정을 시각화 한 이머시브 미디어 아트로, 총 4 개의 작품으로 이루어져 있다. 현대인들에게 여러 복잡한 감정에 대해 고민하는 계기를 만드는 것을 목표로 한다. Falling In: 프로젝트는 이러한 목표를 실현시키기 위해 2022 년 두 번의 오프라인 전시를 진행하였다.