http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양석우,이나영,김소열,Suk Woo Yang,Na Young Lee,So Youl Kim 대한안과학회 2006 대한안과학회지 Vol.47 No.9
Purposes: To evaluate the effect of cycloplegia on the visual acuity and stereopsis according to the refraction and age. Methods: This study included 112 eyes of 56 patients, which were divided into three groups according to the refraction. The best corrected visual acuity and stereopsis were compared between without and with cycloplegia in all groups according to age. Results: After cycloplegia, at near, naked visual acuity decreased in 0.53 logMAR, average and stereopsis also deceased from 93 seconds to 343 seconds. At far, the naked and best corrected visual acuity had less decreased than near visual acuity. At near, there was no significant difference on the degree of decreased visual acuity and stereopsis according to refraction, but in emmetropic patients, the visual acuity at near significantly decreased. Patients younger than ten years old had more decreased visual acuity at near compared with older than forty-five years old. Conclusions: After pupil dilatation, there significant decreased near visual acuity and stereopsis, there was little change at far. The degree of decreased vision was different according to the refraction and age, therefore it would be helpful to explain the anticipating result.
Fabrication of $YBa_{2}Cu_{3}O_{7-x}$-Ag Composite Superconductors by Pyrophoric Synthetic Method
양석우,김찬중,홍계원,신형식,Yang, Seok-U,Kim, Chan-Jung,Hong, Gye-Won,Sin, Hyeong-Sik Materials Research Society of Korea 1998 한국재료학회지 Vol.8 No.12
$YBa_2$$Cu_3$$O_{7-y}$ (123) 초전도체에서 은 입자의 미세분산을 얻고자 말릭산을 사용한 발화합성과 고상반응법으로 123와 123-Ag 복합 초전도분말을 제조하였다. 발화합성분말을 원료로 사용할 시 마이크론 미만의 미세한 123 분말과 은 분말의 복합체를 얻을 수 있었다. 원료로 사용된 산화은($Ag_2O$) 분말은 발화합성과정 중금속 은으로 환원되었다. 원료분말에 첨가된 금속 은에 의한 반응 물질간의 확산 촉진으로 123상이 단시간내에 생성되었고 입자성장도 촉진되었다. 발화합성법으로 제조한 시편은 기계적 혼합공정으로 제조한 시편에 비해 은 입자들은 미세하게 분산시킬 수 있어서 초전도체의 임계전류밀도가 향상되었다. To obtain fine dispersion of Ag particles in $YBa_2$$Cu_3$$O_{7-y}$ (123) superconductors, 123 samples were made by pyrophoric synthetic method using malic acid and the subsequent solid- state reaction. As the pyrophoric synthetic powder was used as a precursor material, fine 123 powder of submicron size was produced in a short reaction time. The added $Ag_2$O was converted to metallic Ag during Pyrophoric reaction and it accelerated both the formation of 123 phase and the grain growth via the enhanced mass transfer. The Ag particles of the sample sintered using the pyrephoric synthetic powder were more finely dispersed in the 123 matrix, compared to those of the sample sintered using the mechanically mixed powder, attributing to the improvement of the superconducting properties.
발화합성법에 의한 YBa<sub>2</sub>Cu<sub>3</sub>O<sub>6+x</sub> 초전도 선재의 제조
양석우,이영민,김영순,박정식,김찬중,홍계원,신형식,Yang, Suk-Woo,Lee, Young-Min,Kim, Young-Soon,Park, Jeong-Shik,Kim, Chan-Joong,Hong, Gye-Won,Shin, Hyung-Shik 한국공업화학회 1998 공업화학 Vol.9 No.7
$YBa_2Cu_3O_{6+x}(Y123)-Ag$ 초전도 선재를 0/20 wt%의 은(Ag)을 첨가한 발화합성분말과 고상반응분말을 사용하여 플라스틱 압출법으로 제조하였다. 플라스틱 압출법은 분말제조, 플라스틱 paste 제조, 다이 압축, binder 소각 및 소결공정을 포함한다. 양질의 초전도체를 제조하려면 원료물질이 균질하고 미세한 분말이어야 한다. 0/20 wt%를 첨가한 $Y_2O_3-BaCO_3-CuO$ precursor 분말을 발화합성(PS)법과 고상반응(MM)법으로 제조하였다. 원료분말이 Y123 초전도상으로 전이되는 생성속도를 공기중에서 여러온도와 시간별로 반응시켜 알아보았다. 발화합성법으로 제조한 분말이 고상반응법으로 제조한 분말보다 Y123상으로 빠르게 전이되었다. 이것은 PS법으로 제조한 분말이 미세한 크기와 균질한 화학적 조성으로 인해 Y123상으로 빠른 전이를 한 것이기 때문이다. 플라스틱 압출법으로 제조한 Y123-Ag 초전도 선재의 임계전류밀도($J_c$)는 원료분말의 특징에 따라 $150{\sim}230A/cm^2$값을 나타내었다. 은을 20 wt.% 첨가한 발화합성분말로 제조한 선재의 $J_c$는 $230A/cm^2$이었다. $YBa_2Cu_3O_{6+x}(Y123)-Ag$ high-Tc superconducting wires were fabricated by plastic extrusion technique using pyrophoric synthetic and mechanical mixing powder with and without Ag addition(20 wt.%). This method involves powder preparation, plastic paste making, die extrusion, binder burn-out and the sintering process. In order to fabricate a good-quality superconducting body, it is required to use homogeneous and fine-size power as a starting materials. $Y_2O_3-BaCO_3-CuO$ precursor powders with/without Ag addition were prepared both by pyrophoric synthetic(PS) and mechanical mixing(MM) method of raw powders. The formation kinetics of the powder mixtures into Y123 phase was investigated at various temperatures and times in air atmosphere. The powder prepared by PS method was more easily converted into a Y123 phase than the MM powder. The fine size and good chemical homogeneity of the powder prepared by PS method is attributable to the fast formation into a Y123 phase. The critical current density($J_c$) of the Y123-Ag superconducting wires made by plastic extrusion method were in the range of $150A/cm^2{\sim}230A/cm^2$. depending on the charateristics of starting material powders. $J_c$ of the wire prepared by pyrophoric synthetic powder with 20 wt.% Ag addition was $230A/cm^2$.
CVD 법에 의한 Si ( 111 ) 기판에 YBaCuO 계 초전도 박막의 제조
양석우,김영순,신형식 ( Suk Woo Yang,Young Soon Kim,Hyung Shik Shin ) 한국공업화학회 1997 공업화학 Vol.8 No.4
화학증착법을 통하여 650℃의 증착온도와 0.0126Torr의 산소분압인 증착조건에서 원료물질로 β-diketonates 킬레이트 화합물을 사용하여 Si(111) 및 SrTiO₃(100) 기판에 YBa₂Cu₃Oy 고온 초전도 박막을 제조하였다. SrTiO₃(100)기판에서 제조된 박막의 T_(c.onset)과 T_(c.o)는 각각 91K와 87K로 나타났다. 또한, Si(111)기판에서 제조된 박막의 T_(c.onset)은 91K였지만 T_(c.o)는 액체질소 비등점(77.3K)에서는 보이지 않았다. SrTiO₃(100)에 증착된 초전도 박막은 치밀하고 2차원적으로 배열된 미세구조를 갖고 있는 반면, Si(111)에 증착된 초전도 박막은 상대적으로 기공이 많으며 무질서한 미세구조를 형성하였다. Superconducting YBa₂Cu₃Oy thin films were prepared at the deposition temperature of 650℃ under oxygen partial pressure of 0.0126Torr on Si(111) and SrTiO₃(100) substrates by chemical vapor deposition technique using β-diketonates of Y, Ba and Cu as source materials. The thin film fabricated on SrTiO₃(100) had a T_(c.onset) of 91 K and T_(c.o) of 87 K. The thin film prepared on Si(111) had a T_(c.onset) of 91 K but didn`t have a T_(c.o) at liquid nitrogen boiling point(77.3 K). Dense and two-dimensionally well alligned microstructure was developed for the film deposited on SrTiO₃(100) substrate whereas a relatively porous and randomly distributed microstructure was developed for the film prepared on Si(111) substrate.
농어, Lateolabrax japonicus와 점농어, L. maculatus 정역교잡의 난 발생 및 자치어 형태발달
양석우(Seok Woo YANG),곽은주(Eun Joo KWAK),이경우(Kyung Woo LEE),한경호(Kyeong Ho HAN),이원교(Won kyo LEE) 전남대학교 수산과학연구소 2008 수산과학연구소논문집 Vol.17 No.1
농어류의 교잡종 생산 가능성을 알아보기 위해 농어(♀)×점농어(♂) 및 점농어(♀)×농어(♂)의 난과 자치어 발생을 조사하였다. 교잡종간 난발생과정에는 거의 차이가 없었다. 농어와 점농어의 정역교배에 의해 생산된 수정란의 수온에 따른 부화 시간과 부화율은, 농어(♀)×점농어(♂)의 경우 20.0℃에서 48시간 20분, 68.3%, 18.0℃에서 50시간 25분, 70.6%, 16.0℃에서 70시간, 76.8%였고, 점농어(♀)×농어(♂)의 경우 20.0℃에서 48시간 30분, 70.5%, 18.0℃에서 50시간 5분, 73.8%였다. 농어(♀)×점농어(♂)과 점농어(♀)×농어(♂)의 부화 직후 자어는 전장이 각각 4.17±0.06 ㎜, 3.80±0.03㎜로 비슷하였다. 그러나 흑색소포가 농어(♀)×점농어(♂)에서는 체표면에 전체적으로 분포하였으나, 점농어(♀)×농어(♂)에서는 항문을 전후로 짙게 띠를 형성하고 있었다. 이들은 부화 4일째부터 섭이를 시작하여 44일째에 치어기에 이르렀다. 치어기에 이른 시기의 전장은 농어(♀)×점농어(♂)가 15.27±0.33 ㎜, 점농어(♀)×농어(♂)가 17.00±0.50 ㎜로 유의차는 없었다. 교잡의 자치어기 일령과 전장의 관계에 대한 회귀직선식은 농어(♀)×점농어(♂)가 Y = 0.2722X + 3.3277 (r = 0.9786), 점농어(♀)×농어(♂)은 Y = 0.2895X + 3.2526 (r = 0.9779)로 나타났다. For the possibility of hybrid production, we investigated the development of embryo and larvae in sea bass(♀)×spotted sea bass(♂) and spotted sea bass(♀)×sea bass(♂). There were few differences in the embryo developmental process among hybrids. Hatching rates were 76.8% (16.0℃, 70 hours), 70.6% (18.0℃, 50 hours 25 minutes), 68.3% (20.0℃, 48 hours 20 minutes) in sea bass(♀)×spotted sea bass(♂); 73.8% (18.0℃, 50 hours 5 minutes), 70.5% (20.0℃, 48 hours 30 minutes) in spotted sea bass(♀)×sea bass(♂). Melanophores appeared as the vertical band on lateral sides of the body in spotted sea bass(♀)×sea bass(♂), but not in sea bass(♀)×spotted sea bass(♂). The larvae of 4 days after hatching ate food in all groups. Hatched larvae took 44 days to develop into juveniles at 18~20℃ in all groups. Total length of the juveniles was 15.27±0.33 ㎜ and 17.00±0.50 ㎜ in sea bass(♀)×spotted sea bass(♂) and spotted sea bass(♀)×sea bass(♂), respectively. The relationship between the days (X) and the total length (Y) of larvae and juveniles were: sea bass(♀)×spotted sea bass(♂): Y=0.2722X + 3.3277 (r=0.9786) spotted sea bass(♀)×sea bass(♂): Y=0.2895X + 3.2526 (r=0.9779)
리눅스 기반 시스템의 사용자 응답성 향상을 위한 적응형 페이지 선 Zeroing 기법
양석우 ( Seok-woo Yang ),김정호 ( Jung-ho Kim ) 한국정보처리학회 2018 한국정보처리학회 학술대회논문집 Vol.25 No.1
고성능 모바일 기기가 보급화 됨에 따라 증강 현실,3D 게임과 같은 고사양 응용들이 출시되고 있다. 이러한 응용들의 응답성은 모바일 기기의 품질을 결정하는 중요한 요소들 중 하나이다. 기존 연구에 따르면 고사양 응용들 중 하나인 웹 브라우저의 응답 시간에서 페이지 zeroing 에 소요되는 시간이 적지 않은 비중을 차지한다. 본 논문은 페이지 zeroing 에 소요되는 시간을 단축하기 위해 적응형 페이지 선 zeroing 기법을 제안한다. 제안된 기법은 응답 시간이 아닌 구간에서 페이지들을 미리 zeroing 하여 보관해 두었다가 응답 시간인 구간에서 페이지 할당 요청시 미리 zeroing 된 페이지들을 응용에게 제공한다. 이를 리눅스 커널 3.4 가 탑재된 Nexus 5 에 구현하였고 실험을 통해 확인한 결과,모델링 된 응용의 응답 시간이 평균 39.52% 단축됨을 확인하였다.