http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양민혁(Yang, Min Hyuk),양소진(Yang, So Jin),김운형(Kim, Woon Hyung) 한국방재학회 2020 한국방재학회논문집 Vol.20 No.1
본 연구는 유동법 부동액 사용법 및 펌프의 열에 의한 순환법에 의한 배관의 온도상승효과 실험을 통하여 물류창고의 소화배관동결방지를 위한 기초자료를 확보하는 목적을 갖고 있다. 실험결과, 부동액 20% 농도에서는 -7 ℃까지, 10%에서는 -4 ℃까지배관내부 동결방지가 가능함을 확인하였다. 부동액 농도별 유속조건하의 온도상승 실험결과, 1m/s의 유속에서는 20%, 10%, 0% 농도에서 배관부위 위치 기준으로 각각 1.8 ℃, 0.6 ℃, 1.7 ℃가 상승하였으며 2 m/s의 유속에서는 각각 2.1 ℃, 3.1 ℃, 0.9 ℃가 상승하였다. 아울러 펌프의 작동에 의한 순환법 실험에서는 압력 0.9 kgf/cm2 , 유량이 120LPM일 경우 1.2 ℃, 압력2.5kgf/cm2 , 유량이 200 LPM일 때 2.7 ℃가 상승하였다. 이를 통하여 순환펌프의 회전차(Impeller)와 물간의 마찰에 의해 생성되는열로 인하여 습식 소화배관을 영상으로 유지하는 새로운 동결방지기법을 제시하였다. This study aims to test the effect of temperature-rise on fire extinguishing facility piping by means of the flow method using an antifreeze solution and the circulation method by the heat of the pump to secure. The results of the experiment showed that the insides of the pipe freeze at -7 ℃ at a concentration of 20% antifreeze and -4 ℃ at 10%. When tested with the flow velocity of the antifreeze maintained at 1 m/s and concentrations of 20%, 10%, and 0%, the temperatures rose by 1.8 ℃, 0.6 ℃, and 1.7 ℃, respectively. At a velocity of 2 m/s, the temperatures rose by 2.1 ℃, 3.1 ℃, and 0.9 ℃. In addition, the circulation method test, by operating of the pump, increased the temperature by 1.2 ℃ with a pressure of 0.9 kgf/cm2 and flow rate of 120 LPM. The pressure of 2.5 kgf/cm2 and flow rate of 200 LPM increased the temperature by 2.7 ℃. Finally, a novelfreeze protection method was proposed to maintain the setup above freezing point due to the friction heat generated between the impeller of the pump and water.
재난약자 수평 대피도움 장치 이동 성능평가에 관한 연구
양민혁(Yang, Min-hyeok),채승언(Chae, Seung-un),김종훈(Kim, Jong-hoon) 한국방재학회 2022 한국방재학회논문집 Vol.22 No.1
요양시설 및 병원의 경우 자력으로 움직임이 불가능한 재난약자의 경우 화재 시 조력자를 활용하여 대피하여야 한다. 하지만 조력자를 활용하여 대피하는 방법은 상당한 제약이 있으며 화재 발생 시 자력으로 대피가 어려운 환자들은 조력자가 필요 없는 침대의 자율주행이동이 매우 효과적인 대피수단이 될 수 있다. 본 연구에서는 자율주행형 대피 도움장치의 설정된 목표지점 도착의 정확성, 소요시간, 장애물 회피 및 통과성능 등을 평가 분석하고자 한다. 이러한 시험의 결과를 통해 재난약자 수평 대피도움 장치의 도착 지점과 수직이동 대기 장소에 대한 지정에 있어서 오차범위에 안전율을 고려한 주차면적을 설정해야 할 것이다. In the event of a fire in nursing homes and hospitals, those unable to move by themselves should seek the help of an assistant. However, there are not enough staff to help evacuate everyone at the hospital, making it difficult to depend on the help of assistants to evacuate everyone. Therefore, an autonomous movement that does not require an assistant can be a very effective means of evacuation in such cases. In this study, an evaluation of the accuracy, required time, obstacle avoidance, and passing performance of the aid device to arrive at the set target point were presented. The test results show that it is necessary to position the parking area considering safety factors such as the error range of the designated arrival point of the horizontal evacuation assistance device and the waiting point for vertical movement.
양민혁(Min Hyeok Yang),김태훈(Taehoon Kim) 한국화재소방학회 2021 한국화재소방학회 학술대회 논문집 Vol.2021 No.추계
샌드위치 패널의 화재특성에 영향을 미치는 요인은 단열재의 특성뿐만 아니라 패널 건축물의 접합 부위 및 마감방법, 패널 간 연결방법 등의 시공방법 또한 샌드위치 패널의 화재특성에 영향을 미치게 된다. 하지만 우리나라의 샌드위치 패널의 성능 시험은 KS F ISO 5660-1의 난연성 시험방법을 사용하고 있다. 이는 소형시편의 시험으로 단열재의 화재특성을 확인 할 수는 있으나 샌드위치 패널 건축물의 화재특성을 파악하기란 불가능하다. 이에 따라 국토교통부는 실대형 시험(KS F ISO 13784-1)으로 전환하고 샌드위치 패널의 화재안전성을 확보하고자 개정고시안을 내놓은 상태이다. 개정고시안의 실대형 성능시험은 성능 통과 기준은 결합부 출화, 개구부 출화, 천장 평균 온도 650℃ 초과, 열량계의 열유속 25KW/m² 초과, 시험체 바닥의 신뭉지 발화, 총 다섯가지로 분류하여 시험중에 하나라도 발생시 성능 불합격이 된다. 이에 본 연구에서는 국토교통부의 개정고시안의 성능 시험 기준에 따라 기존의 단열재를 사용하여 화재 안전성을 확인하고자 한다. 샌드위치 패널의 단열재는 현재 시중에서 가장 많이 사용되는 EPS, PIR, 글라스울, 미네랄울로 선정 하였으며 동일한 조건으로 시험하여 확인하기 위해 샌드위치 패널의 두께는 180T로, 시험체의 크기는 2400 × 3600 × 2400 (mm)의 크기로 통일하였으며 시험체의 구조는 골조형으로 마감방법, 고정방법, 연결방법 등 모든 면에서 동일하게 제작되었다, 시험방법은 KS F ISO 13784-1의 규격에 따라 30분간 시험하였다. 주요 결과로 단열재별 최고온도는 EPS는 13분 25초에 539℃, 글라스울은 18분 54초에 475℃, 미네랄울은 19분 47초에 441.6℃, PIR은 18분 17초에 427℃까지 도달하였으며 열유속은 EPS 47.08KW/m², 글라스울 7.05KW/m², 미네랄울 6.78KW/m² PIR는 측정 장비 고장으로 확인하지 못하였다. 패널 화재확산은 EPS, PIR의 경우 패널의 결합부에 화염이 확산하여 외부로 화염이 출화하였고 미네랄울과 글라스울의 경우 결합부의 출화는 없었다. 실험결과 EPS는 열량계 열량 초과 및 결합부 출화로 불합격 하였고 PIR의 경우 결합부 출화로 불합격 하였다. 하지만 글라스울 및 미네랄울은 천장 온도, 출화, 열유속 등 성능기준 다섯가지 항목 모두 통과하였다.
골프중계 시 골프-가상광고이미지 일치성, 광고태도, 제품태도, 제품이미지 및 구매의도의 구조적 관계
양민혁(Yang, Min-Hyeok) 한국체육과학회 2015 한국체육과학회지 Vol.24 No.2
The purpose of this study was to determine the structural relationship among golf-virtual advertisement image congruence advertisement attitude, product attitude, product image and purchase intention during golf broadcasting. For the investigation subjects of this study, targeting university students who have major in golf, 3 colleges were selected from the regions of Seoul, Gangwon and Cheongnam. After sampling total of 300 people - consists of 100 people from each college - total of 279 final data, which excludes 21 inappropriate data, were utilized. For data processing, PASW 18.0 and AMOS 18.0 were utilized. Upon completion of the data processing, individual hypotheses were verified upon completion of test of goodness of fit. The results are as follows. First, golf-virtual advertisement image congruence had a significant effect on advertisement attitude. Second, advertisement attitude had a significant effect on product attitude. Third, advertisement attitude had a significant effect on product image. Forth, product attitude had a significant effect on product image. Fifth, product attitude had not significant effect on purchase intention. Sixth, product image bad a significant effect on purchase intention.
양민혁(Minhyeok Yang),오병우(Byoung-Woo Oh) 한국기계가공학회 2014 한국기계가공학회지 Vol.13 No.3
The utilization range of mobile devices is becoming broader than before due to the rapid development of the mobile market. Furthermore, the demands for computer-aided management are increasing due to the extensive expansion of the installation of solar street lights. In this paper, we propose a system which can be used to observe solar street lights. The manager of the system can control and manage the solar street lights using video images on a mobile device.
화재 발생 시 센서별 특성을 이용한 비상구 유도등 개발
김종관(Jong-Kwan Kim),정도현(Do-Hyeon Jeong),유용우(Yong-Woo Yu),양민혁(Min-Hyeok Yang),이붕주(Boong-Joo Lee) 한국전자통신학회 2021 한국전자통신학회 논문지 Vol.16 No.6
가스 센서, 조도 센서, 온도 센서, 아두이노 우노, 블루투스 모듈을 이용하여 화재 발생 시 비상구 위치를 신속하게 파악하기 위해 비상구 유도등을 설계하고 제작하였다. 본 연구는 화재 발생 시 가스 센서와 온도 센서를 이용하여 높은 온도와 연기를 감지하였을 때 시인성을 좋게 하기 위하여 조도 값이 낮을수록 적색 화살표, 조도 값이 높을수록 녹색 화살표가 나오도록 설계하였다. 또한 통신 모듈을 이용한 경보음과 문자전송 알고리즘을 응용하여 174Hz의 경보음과 화재 장소를 알리는 문자메시지를 소방서로 송신하는 기능을 추가하여 보다 큰 화재를 예방할 수 있게 설계되었다. Emergency exit guidance lights were designed and manufactured to quickly determine the location of the emergency exit in the event of a fire using a gas sensor, an illumination sensor, a temperature sensor, an Arduino Uno, and a Bluetooth module. This research was designed such that, when a fire breaks out, a red arrow appears as the illuminance value is low and a green arrow as the illuminance value is high to improve visibility when detecting high temperature and smoke. In addition, it is designed to prevent more serious conflagration by applying an alarm sound and text transmission algorithm using a communication module to transmit text messages indicating a 174Hz alarm sound and a fire location to prevent more serious conflagration.