http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
안성욱,류성열,Ahn, Sung-Wook,Rhew, Yul-Sung 한국정보처리학회 2009 정보처리학회논문지D Vol.16 No.4
모바일 환경에서 유지보수의 효율적인 관리를 위해서는 서비스를 정책으로 관리하기 위한 시스템 구조와 정책정의언어가 필요하다. 본 연구는 IETF의 정책 프레임웍 중에 정책 실행자인 PEP 구조를 정의하고, PEP 구조하에서 수행될 수 있는 정책정의언어를 제안한다. 제안한 정책정의언어는 문헌자료와 모바일 특성을 기반으로 하여 요구사항을 도출하고, 3단계 접근 방법으로 정책정보모델을 설계하여 정책정의언어로 정의하였다. 3단계 접근 방법은 정책이 적용될 범위를 결정하는 정책도메인, 정책 적용 및 제어하는 종류를 구분하는 정책규칙, 정책 구조를 문맥화하는 정책문법으로 구성된다. 제안한 정책정의언어의 효율성을 검증하기 위하여 시나리오를 정책정의언어로 정의하여 정책 도구를 이용하여 검증하였고, 타 정책정의언어들과 비교 분석하여 확장성을 입증하였다. In order to manage repair and maintenance efficiently in the mobile environment, the system structure to manage service as a policy and the policy description language are needed. This research defined the structure of PEP, which is the executioner of policy in the IETF policy framework, and proposed the policy description language which can be carried out under the PEP structure. The proposed policy description language derived demand matters based on documentary data and the characteristics of mobile and the policy information model was designed with the three stage approaches and was defined as policy description language. The three stage approaches are made up of the policy domain that decides the scope to which the policy applies, the policy rules which distinguish the kinds of policy application and control, and policy grammar which contextualizes the policy structure. In order to verify the efficiency of the policy description language, scenarios are defined with the policy description language and verified it by using policy tool and proved the expansive nature by comparing and analyzing other policy description language.
안성욱(Ahn Sung-Wook),김광혁(Kim Kwang-Hyuk),홍경표(Hong Gyung-Pyo) 한국방송·미디어공학회 2008 한국방송공학회 학술발표대회 논문집 Vol.2008 No.-
방송에서의 광고의 비중이 높아짐에 따라 광고 수익을 극대화하기 위한 기술의 발전이 활발히 이루어지고 있다. 최근의 이러한 광고 관련 기술들을 일반적으로 Advanced Advertising이라고 하며 그 중 시청자의 선호에 맞는 광고만을 시청자에게 제공하는 타깃광고(Targeted Advertisting) 방식 등 수신기별로 특화된 광고를 제공하는 기술을 클라이언트 기반 광고 삽입 방식이라고 한다. 북미의 인터랙티브 케이블방송 규격인 OCAP(OpenCable Application Platform)은 OCAP DPI(Digital Program Insertion) 라는 명칭의 클라이언트 기반 광고 삽입 방식에 대한 북미 일부 지역에서의 시험 방송의 성공한 후 관련 규격을 OCAP1.1-IO1에 발표하기에 이르렀다. 조만간 상용화되면 OCAP DPI를 통해 북미 케이블방송 사업자들의 광고 수익 향상에 기여할 것은 물론이고 시청자들의 만족도를 향상시킬 것이다. 이런 움직임은 케이블 진영뿐만 아니라 Open IPTV Forum, ATSC 등 IPTV나 지상파 TV 진영에서도 이 기술에 대한 타당성 검증 및 표준화가 논의가 활발히 진행되고 있는 실정이다. 본 논문은 클라이언트 기반 광고 삽입 기술에 대해 OCAP DPI 를 구현한 경험을 바탕으로 그 원리 및 동작을 설명하고, DVR(Digital Video Recorder) 또는 PVR(Personal Video Recorder)의 주요 기능인 스토리지에 방송스트림을 저장하고 재생하는 기능을 이용하는 광고 삽입 방법에 대해 제안하며, Cable IPTV Hybrid의 웹 접근성을 이용하여 웹 서버에 저장되어 관리 및 운용되는 광고컨텐츠의 스트리밍을 통한 광고 삽입 방법에 대한 제안하고, 마지막으로 실제 이러한 광고 삽입 기술을 적용하는 데에 있어 발생되는 문제점들을 언급하고 그 해결에 대한 의견을 제시한다.
김준현(Joon Hyun Kim),안성욱(Sung Wook Ahn),이세진(Se Jin Lee) 한국생산제조학회 2014 한국생산제조학회지 Vol.23 No.5
This paper describes an improved design model that can be used to configure a non-contact pneumatic device to turn a large sheet at the in-line system. For rotational moving in the conveyor system, the conventional method is to turn the system itself. The improved non-contact pick-up system mainly uses 8 pairs of L-shaped latches and 12 swirl type heads. It is positioned above the upward air flow table. This system performs the non-contact gripping and side-edge contact support in the vertical and rotational directions to hold the self-weight of a large flat sheet. A non-contact air head can exert a sufficient gripping ability at 4N lower than the standard working pressure. The side latches support 60% of the lifting force required. Through structural and flow analysis, the working conditions were simultaneously considered in accordance with the deflection and flatness of the glass.
송성일(Seong-Il Song),안성욱(Sung Wook Ahn),김영글(Young Geul Kim),김현규(Hyun-Gyu Kim) 대한기계학회 2015 大韓機械學會論文集A Vol.39 No.11
본 연구에서는 맞대기 용접부, 겹치기 용접부 그리고 T자형 용접부에 대한 해석과 실험 결과를 비교하여 용접부의 단순화 유한요소 모델을 개발하였다. 맞대기와 겹치기 용접에 대한 시험편을 제작하고 3점 굽힘 시험을 통하여 용접 구조물의 강성과 용접 비드 근처의 변형률을 측정하였다. 이와 유사하게 T-자형 용접 시편에 대하여 끝 단에 하중을 부여하고 용접 구조물 강성과 용접 비드 근처의 변형률을 측정하였다. 용접부에 대한 단순화 유한 요소 모델의 형상 변수들을 설정하였고 선형 회귀 분석을 수행하여 실험 결과를 보다 정확히 표현할 수 있는 단순화 유한요소 모델의 형상 변수들을 결정하였다. In this paper, we develop simplified finite element (FE) models for butt-, lap- and T-welded joints by performing numerical and experimental experiments. Three-point bending tests of butt- and lap-welded specimens are performed to obtain the stiffness of the specimens and the strains at points near the welding beads. Similarly the stiffness and strains of T-welded specimen are measured by applying a point load at the end of the specimen. To develop simplified FE models, we consider the shape parameters of width, thickness and the angle of weld elements in the numerical simulations. The shape parameters of the simplified FE models are determined by building linear regression models for the experimental data sets.
김준현(Joon Hyun Kim),김영글(Young Geul Kim),안성욱(Sung Wook Ahn),김용성(Young Sung Kim) 한국생산제조학회 2013 한국생산제조학회지 Vol.22 No.6
This paper describes an improved model that can be used for configuring a non-contact pneumatic head to handle a large sheet of glass. The cylindrical head model is of a large size (70 mm). It operates on vortex flow, which can simultaneously generate suction and repulsion over the flat objects surface. The head allows for the minimal non-contact lifting of objects weighing over 3N by using reference conditions (working pressure and head dimensions). Additionally, a functional flow-guide is applied for inducing a developing tangential vortex flow to increase suction and repulsion to the reference head. The cylindrical flow-guide is associated with relatively low tangential velocity. The improved model generates greater lifting force than the reference model, as verified experimentally.