http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
백리향 (Thymus quinquecostatus Celakovsky) 잎에 분포하는 두상형 분비모의 미세구조
신현철,유성철,Shin, Hyun-Chur,Yu, Seong-Cheol 한국현미경학회 1998 Applied microscopy Vol.28 No.2
The glandular secretory system of the capitate gandular trichomes in leaf of Thymus quinquecostatus Celakovsky was examined by transmission electron microscope. The glandular trichome was consisted of three cell layers; an basal cell layer, a stalk cell with single-celled intermediate layer and a discoid secretory layer with thickened cuticle. The secretory cell was dense, rich in mitochondria, rER, plastds, Golgi complex and had many vesicular structure. Typical plastids with reticulate body and plastoglobule were present in glandular trichome. The tytoplasm of secretory cell was filled with osmiophilic secretory materials. The secretory vesicles, originated from Golgi complex, appeared as membrane bounded vesicles and secreted to the outer wall surface. The presences of well developed rER, mitochondria, Golgi complex, and membrane-bounded vesicles fused with plasmalemma in the secreting cells indicate that the granulocrine mechanism of secretion was occurring in T. quinquecostatus. Subcuticular cavity was developed between the cuticular layer and the secretory cell wall, and it formed above the secretory cell upon separation of cuticle-wall.
방전 플라즈마 소결법에 의한 다공성 알루미나 세라믹스의 제조
신현철,조원승,신승용,김준규,Shin, Hyun-Cheol,Cho, Won-Seung,Shin, Seung-Yong,Kim, Jun-Gyu 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.12
고강도의 다공성 알루미나 세라믹을 제조하기 위하여, 기공 전구체로서 흑연을 첨가한 후, 방전 플라즈마 소결시의 제조조건을 체계적으로 조사하였다. 제조한 다공성 알루미나에 대하여, 기공률과 기공분포 및 압축강도 등을 조사하였다. 알루미나에 흑연을 10∼50 vol%까지 첨가하여 방전 플라즈마 소결법으로 1차 소결체를 제조한 후, 공기 중 흑연을 열분해시켜 최종적으로 다공성 알루미나를 제조하였다. 그 결과, 소결온도 1000${\circ}C$, 유지시간 3 min, 압력 30 MPa, 승온속도 80${\circ}C$/min, 펄스방법 12:2의 조건에서 높은 기공률의 다공성 소결체를 얻을 수 있었다. 일례로, 10∼30 vol%의 흑연을 첨가하여 제조한 다공성 알루미나의 경우, 약 50∼57%의 높은 기공률을 나타내었다. 또한, 흑연의 함량이 증가함에 따라 개기공률은 지속적으로 증가하였다. 이러한 기공특성과 흑연함량의 상호관계는 클러스터의 수와 크기에 의존하는 퍼콜레이션 모델에 의해 설명될 수 있다. 한편, 10∼30 vol%의 흑연을 첨가하여 제조한 다공성 알루미나의 경우, 55∼200 MPa의 높은 강도값을 나타내었다. 이와 같은 강도의 향상은 펄스전원에 의한 분말 입자간 방전 및 자기발열작용의 영향으로 생각된다. In order to develope the porous alumina ceramics with high strength, the pore characteristics and compressive strength were investigated in terms of relation to the conditions of spark-plasma sintering and the contents of graphite as a pore precursor. Porous alumina bodies were successfully prepared by spark-plasma sintering and burning out graphite in air. High porous bodies were fabricated by sintering at 1000${\circ}C$ for 3 min under a pressure of 30 MPa, heating rate of 80${\circ}C$/min and on-off pulse type of 12:2. For example, alumina bodies prepared by the addition of 10∼30 vol% graphite showed high porosity of 50∼57%. Also, the open porosity increased with graphite content. The relationship between pore characteristics and graphite contents could be explained by percolation model depending on cluster number and size. Porous alumina bodies prepared by the addition of 10∼30 vol% graphite showed the high compressive strength of 55∼200 MPa. This great improvement in strength was considered to be mainly due to the spark-plasma discharges and the self-heating action between particles.
래피드 프로토타이핑 기법을 이용한 프로토타입 시스템 설계에 관한 연구
신현철(Hyun-Cheol Shin),윤경섭(Kyeong-Seob Yun),왕창종(Chang-Jong Wang) 한국정보과학회 1988 한국정보과학회 학술발표논문집 Vol.15 No.2
래피드 프로토타이핑(rapid prototyping)은 적은 비용으로 소프트웨어 라이프 사이클의 초기에 소프트웨어 프로토타입을 생성키 위한 기법을 말한다. 본 연구에서는 래피드 프로토타이핑 기법을 요구 분석 단계에 도입하여 소프트웨어 프로토타입 시스템인 PDS(Prototype Design System)를 구축한다. 이 시스템은 첫째, 요구 명세를 목적 프로그래밍 언어로 변환하기 위한 중간 단계인 구조적 변환표를 생성하고 둘째, 변환표에서 요구의 비형식 명세를 번역하며 셋째, 변환표를 목적 프로그램 구조의 프로토타입으로 변환하는 작업을 한다.
제로에너지하우스 구현을 위한 부문별 요소기술 조합에 따른 에너지소비량 및 비용분석
신현철(Shin, Hyun-Cheol),장건익(Jang, Gun-Eik) 한국건축친환경설비학회 2015 한국건축친환경설비학회 논문집 Vol.9 No.2
The energy consumption of buildings in Korea amounts to 25 percent of the total consumption. As the activation of building energy savings, the mandatory of zero energy is preparing to implement in 2025. In this paper, the respective technologies that are able to considerably reduce the energy demands for heating, cooling, hot-water supply, lighting and ventilation among the variety of technologies were selected and the effects for applications of each technology were evaluated quantitatively. For this study, the applied technologies for "Green Home" which was built in the middle of 2000s were analyzed and design factors such as external insulation, triple glazing window, LED lighting, external venetian blind, geothermal and heat recovery ventilator were derived. In addition, energy saving effects in terms of energy demand, energy consumption and energy expenditure were investigated using EnergyPlus, building energy analysis tool. It can be seen that high insulated triple glazing window, heat recovery ventilator and external insulation technology is excellent for energy demand and geothermal system is most savable for energy consumption. In terms of sunlight, power generation capacity and saving costs are maximized when the installation angle is 30°. It can be attributed to solar altitude.