반응수정계수와 주기의 영향에 대한 철골모멘트저항골조 건물의 내진성능평가

신지욱,이기학,이도형 한국지진공학회 2008 한국지진공학회논문집 Vol.12 No.5

본 연구는 높은 지진의 위험이 내재된 지역에 위치한 3층, 9층 그리고 20층 철골 모멘트저항골조에 대한 반응수정계수와 주기의 영향을 평가하기 위한 것이다. 각 구조물들은 IBC 2000과 KBC 2005에서 제시하고 있는 8의 반응수정계수로 설계되었고 건물에 기대되는 최소의 성능과 최대의 성능을 평가하기 위해서 상한범위와 하한범위의 설계가 고려되었다. 또한 반응수정계수에 대한 영향을 조사하기 위하여 4개의 다른 반응수정계수들이(9, 10, 11, 12) 각 구조물에 대하여 적용되었고 각 구조물의 고유주기 값 외의 4개의 다른 주기를 추가로 적용하여 구조물의 동적거동시 주기에 대한 영향을 조사하였다. 총 150개의 해석모델들은 50년 동안 2%의 초과확률(재현 주기 2500년)을 가진 20개의 지반운동에 대하여 평가되었다. 구조물의 성능평가를 위하여 정적 Pushover와 비선형 시간이력해석이 수행되었으며 구조물의 연성능력을 평가하기 위해서 변위연성요구가 고려되었다. 3층과 9층 구조물은 변위연성요구 값이 비교적 안정적인 거동을 보인 반면 20층 구조물은 동적 불안정성을 야기하는 요소에 의해 민감하게 나타나는 것으로 조사되었다. This study was performed to evaluate the effect of Response modification factors (R-factor) in 3-, 9- and 20- story steel Moment Resisting Frame (MRF) buildings. Each structure was designed using a R-factor of 8, as tabulated in the 2000 International Building Code provision (IBC 2000) and Korea Building Code (KBC) 2008. In order to evaluate the maximum and minimum performance expected for such structures, an upper bound and lower bound design were adopted for each model. Next, each analytical model was designed using different R-factors (8, 9, 10, 11, 12) and four different structural periods with the original fundamental period. For a detailed case study, a total of 150 analytical models were subjected to 20 ground motions representing a hazard level with a 2% probability of being exceeded in 50 years. In order to evaluate the performance of the structures, static push-over and non-linear time history analysis (NTHA) were performed, and displacement ductility demand was investigated to consider the ductility capacity of the structures. The results show that the dynamic behaviors for the 3- and 9-story buildings are relatively stable and conservative, while the 20-story buildings show a large displacement ductility demand due to dynamic instability factors. (e.g. P-delta effect and high mode effect)

Preparation and Characterization of C/SiC Composite by Polycarbosilane Infiltration Method

신지욱,서동권,전준표,강필현 한국고분자학회 2009 한국고분자학회 학술대회 연구논문 초록집 Vol.2009 No.4

Polyethylene/Boron Nitride Composites for Radiation Shilding

신지욱,홍순만,구종민,백범기,유승건 한국고분자학회 2013 한국고분자학회 학술대회 연구논문 초록집 Vol.2013 No.4

Experimental and Analytical Studies on Buckling-Restrained Knee Bracing Systems with Channel Sections

신지욱,이기학,정성훈,이한선,김진구 한국강구조학회 2012 International Journal of Steel Structures Vol.12 No.1

In this paper, Buckling-Restrained Knee Bracing (BRKB) system was developed through sub-assemblage tests. The core plate of the BRKB was restrained with two channel sections. Tests of the five BRKBs were carried out under cyclic loading as specified in the AISC (2005) Seismic Provisions. It was observed that the ductility and energy dissipation capacity of the BRKBs were mainly affected by the variables: size of core plate, size of channel sections, and size of end plate. Four out of five specimens satisfied the compression-strength adjustment factor and cumulative plastic ductility specified in the provisions. The BRKB, which showed the best performance among the test specimens, was applied to a piloti type reinforced concrete building. Static pushover and non-linear time history analyses were performed to confirm the retrofit effect. The analysis results showed that the installation of the BRKBs improved the seismic behavior of the building significantly in terms of strength and story drift.

연속 지진에 의하여 손상된 필로티 RC 건축물의 BRB 보강 전/후의 취약성 평가

신지욱,김준희,이기학 한국지진공학회 2013 한국지진공학회논문집 Vol.17 No.3

This paper presents the seismic evaluation and prediction of a damaged piloti-type Reinforced Concrete (RC) building before and after postretrofitting under successive earthquakes. For considering realistic successive earthquakes, the past records measured at the same station were combined. In this study, the damaged RC building due to the first earthquake was retrofitted with a buckling-restrained brace (BRB) before the second earthquake occurred. Nonlinear Time History Analysis (NTHA) was performed under the scaled intensity of the successive ground motions. Based on the extensive structural response data obtained form from the NTHA, the fragility relationships between the ground shaking intensity and the probability of reaching a pre-determined limit state was were derived. In addition, The the fragility curves of the pre-damaged building without and with the BRBs were employed to evaluate the effect of the successive earthquakes and the post-retrofit effect. Through the seismic assessment subjected to the successive records, it was observed that the seismic performance of the pre-damaged building was significantly affected by the severity of the damage from the first earthquake damages and the hysteresis behavior of the retrofit element.

비좌굴가새의 보강 전과 후의 철골 특수모멘트저항골조 건물의 R계수 평가

신지욱,이기학,조영욱 한국지진공학회 2013 한국지진공학회논문집 Vol.17 No.1

This research presents that seismic performance of steel moment resisting frame building designed by past provision(UBC, Uniform Building Code) before and after retrofitted with BRB (Buckling-Restrained Brace) was evaluated using response modification factor(R-factor). In addition, the seismic performance of the retrofitted past building was compared with that specified in current provision. The past building considered two different connections: bilinear connection, which was used by structural engineer for building design, and brittle connection observed in past earthquakes. The nonlinear pushover analysis and time history analysis were performed for the analytical models considered in this study. The R-factor was calculated based on the analytical results. When comparing the R-factor of the current provision with the calculated R-factor, the results were different due to the hysteresis characteristics of the connection types. After retrofitted with BRBs, the past buildings with the bilinear connection were satisfied with the seismic performance of the current provision. However, the past buildings with the brittle connection was significantly different with the R-factor of the current provision.

거시적 모델을 다르게 고려한 철근콘크리트 벽체의 비선형 해석 연구

신지욱,김준희,유영찬,최기선,김호룡 한국지진공학회 2012 한국지진공학회논문집 Vol.16 No.5

본 연구에서는 주기하중에 대하여 거시적 모델링 방법을 다르게 적용하여 철근콘크리트 벽체의 비선형 해석을 수행하고 기존에 나타난 실험 연구와 비교/분석하였다. ASCE41-06에서 제시하는 높이-길이 비에 따른 벽체의 파괴유형을 참고하여 기존에 수행된실험연구 중에서 높이-길이비가 3.0을 초과하는 세장한 벽체와 높이-길이비가 1.5인 낮은 벽체를 선택하였다. 각 실험체에 대하여 거시적모델을 다르게 고려하여 비선형 해석을 수행하였다. 본 연구에서 적용한 거시적 모델은 휨에 대한 거동을 정확히 묘사할 수 있는 방법과벽체의 복부에서 발생되는 대각 전단을 고려할 수 있는 방법이다. 세장한 벽체는 거시적 모델에 따른 실험과 해석의 결과 차이가 거의없는 것으로 나타났지만 낮은 벽체는 모델링 방법에서 고려할 수 있는 요소에 의해 이력 거동이 크게 달라지는 것으로 조사되었다. 또한,높이-길이 비가 1.5인 철근콘크리트 벽체가 건축물에 적용된 경우 정확한 횡 저항능력을 평가하기 위해서 복부의 대각 압축 전단을 고려할 수 있는 모델을 사용하는 것이 타당하다. In this paper, non-linear analysis was performed for Reinforced Concrete (RC) walls using different macroscopic models subjected to cyclic loading, and the analytical results were compared with previous experimental studies of RC walls. ASCE41-06 (American Society of Civil Engineers) specifies that the hysteresis behaviors of RC walls are different due to the aspect ratio of the walls. For a comparison between analytical and experimental results, a slender wall with an aspect ratio exceeding 3.0 and a squat wall with an aspect ratio of 1.0 were selected among previous research works. For the non-linear analysis, each test specimen was modeled using two different macroscopic methods: the first representing the flexural behavior of the RC wall, and the second considering the diagonal shear in the web of the wall. Through nonlinear analysis of the considered RC walls, the analytical difference of a slender wall was negligible due to the different macroscopic modeling methods. However, the squat wall was significantly affected by the considered components of the modeling method. For an accurate performance evaluation of the RC building with squat walls, it would be reasonable to use a macroscopic model considering diagonal shear.

지진하중에 대한 복층 배럴볼트 시스템의 동적거동에 대한 연구

신지욱,이기학,정찬우,강주원 한국공간구조학회 2009 한국공간구조학회지 Vol.9 No.1

본 논문은 지진하중에 대한 복층 배럴볼트 시스템의 동적거동을 조사한 것이다. 시간이력해석에 따른 지진에 대한 거동을 조사하기 위하여 6개의 다른 개각과 각 개각에 대하여 0.5초 간격으로 4개의 추가적인 고유 진동수가 고려되었다. 전체 24개의 해석모델들이 컴퓨터 해석 프로그램인 MIDAS Gen.에 의해 설계되었고 5%의 감쇠비가 고려된 3개의 지진에 대하여 시간이력해석이 수행되었다. 지진이 적용될 때 수평방향에 대한 응답반응만 고려하는 라멘 구조물과는 달리 대공간 구조물의 경우 수평방향 뿐만 아니라 상하 방향의 동적거동을 고려하는 것이 중요하다. 따라서 본 연구에서는 수평방향 지진(H)과 수직방향 지진(V)에 대하여 X-, Y- 그리고 Z- 방향에 대한 동적거동 특성에 대하여 평가하였다. 개각과 진동수에 따른 동적거동 특성을 파악하기 위하여 최대 응답이 나타나는 시간에서 배럴볼트 시스템의 특정 절점들에 대한 가속도 응답비를 살펴보았다. 본 논문에서 동적거동을 조사한 가장 중요한 목적은 본 연구의 최종 목적인 배럴볼트시스템에 대한 등가정적지진력을 구하는 식을 제안하기 위함이다. This paper presents dynamic behavior of double-layer barrelvault systems subjected to earthquake loadings. In order to investigate different seismic behaviors according to Time History Analysis (THA), six open angles were employed and different fundamental frequencies corresponding to each open angle were considered. A total of 24 double-layer structures were developed by using Midas Gen., which is a computer analysis program and then THA with three different earthquakes with 5% damping ratio was performed. This study investigated the characteristics of the dynamic response for X-, Y- and Z- directions, both subjected to the horizontal earthquake (H) and applied to the vertical earthquake (V) with respect to the each variable, which assumed to be important aspects for spatial structure. In order to examine the dynamic characteristics, the ratio of acceleration in specific nodes of barrelvaults was evaluated at the time with maximum response. The main purpose of this study is to obtain equations of the equivalent earthquake loading with respect to the barrelvault systems.

폭발 하중에 대한 FRP 재킷 시스템이 보강된 철근콘크리트 기둥 해석 모델 개발

신지욱,Shin, Jiuk 한국공간구조학회 2021 한국공간구조학회지 Vol.21 No.2

This paper aims to develop numerical models for seismically-deficient reinforced concrete columns retrofitted using a fiber-reinforced polymer jacketing system under blast loading scenarios. To accomplish the research goal, a coupling model reproducing blast loads was developed and implemented to the column model. The column model was validated with a past experimental study, and the blast responses were compared to the numerical responses produced by past researchers. The validated modeling method was implemented to the non-retrofitted and retrofitted column models to estimate the effectiveness of the retrofit system. Based on the numerical responses, the retrofit system can significantly reduce the peak dynamic responses under a given blast loading scenario.

인공지능 기반 초고속 복합 재난 구조 성능 예측 기술

신지욱,Shin, Jiuk 한국공간구조학회 2020 한국공간구조학회지 Vol.20 No.4