http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Stearic acid로 표면 코팅된 탄산칼슘의 폴리프로필렌에서의 분산
송준영,정연수,함민경,곽영제,정영진,Song, Junyoung,Jung, Yoen-Su,Ham, Min-Kyoung,Kwark, Young-Je,Jeong, Young-Jin 한국섬유공학회 2012 한국섬유공학회지 Vol.49 No.3
Calcium carbonate ($CaCO_3$) with 15~40 nm average diameter was compounded with polypropylene (PP) in a melted state to form composite materials. To enhance the dispersibility in PP, the surface of the $CaCO_3$ was coated with hydrophobic stearic acid (SA). The SA-coated $CaCO_3$ (SA-$CaCO_3$) showed hydrophobic nature, which resulted in rapid precipitation in water. When melt-compounded with PP, SA-$CaCO_3$ was uniformly distributed throughout the PP matrix, while the uncoated $CaCO_3$ formed aggregated structures in the PP. At up to 5 wt% of SA-$CaCO_3$ content, the composites showed well-dispersed structure, although some level of aggregation was observed in the composites with 10 wt% of SA-$CaCO_3$. The dispersibility improved with a repeated process of compounding. The melting and crystallization temperatures of PP increased with incorporation of $CaCO_3$. The enthalpy of the transitions also increased and the full-width of half maximum of the crystallization peak decreased. However, SA-coating did not produce additional effects on the crystallization behavior of PP. These results showed that the $CaCO_3$ acted as crystal nuclei.
Sodium Lignosulfonate 표면처리가 탄산칼슘/폴리프로필렌 복합체에서 탄산칼슘의 분산에 미치는 영향
송준영(Junyoung Song),곽영제(Young-Je Kwark),정영진(Youngjin Jeong) 한국고분자학회 2015 폴리머 Vol.39 No.3
본 연구에서는 탄산칼슘(CaCO3)의 폴리프로필렌에 분산과 탄산칼슘 입자의 크기가 폴리프로필렌의 결정성에 미치는 영향을 연구하였다. 무기물로 충전된 고분자복합재료는 일반적으로 취성(brittleness)의 문제를 가지고 있으며, 이러한 문제는 주로 무기물입자의 크기와 분산에 의해서 영향을 받는다. 따라서 탄산칼슘의 분산성을 향상시키기 위한 방법으로 sodium lignosulfonate(SLS)의 함량을 달리하면서 탄산칼슘을 전처리하고 이에 따른 분산효과를 고찰하였다. 그 결과 3 wt%의 SLS로 처리된 탄산칼슘은 미처리 탄산칼슘에 비해 우수한 분산성을 보였으며, 열분석에서도 빠른 결정형성능을 보였다. 이러한 결정형성능은 탄산칼슘 입자의 크기에 의해서도 영향을 받았으며, 입자의 크기가 커지면 용융과 결정화 과정에서의 엔탈피 출입이 줄어드는 것으로 관찰되었다. 이러한 결과들은 무기물 고분자복합재료의 취성을 해결할 수 있는 단서를 제공한다고 할 수 있겠다. The dispersion of calcium carbonate (CaCO3) in polypropylene (PP) and the effect of CaCO3 size on the crystallinity of PP were studied. Polymer composite usually suffers from the brittleness when reinforced with inorganic fillers. The problem is generally related to the size and dispersion of fillers. First, the dispersion was studied for the nanosize CaCO3 with 15~40 nm average diameter. To enhance the dispersibility in PP, the surface of the CaCO3 was treated with sodium lignosulfonate (SLS). CaCO3/PP composites were prepared via melt compounding. The CaCO3 coated with more than 3 wt% SLS was uniformly distributed within the PP matrix, while the uncoated CaCO3 formed aggregated structures in the PP. Even with 30 wt%, the SLS-CaCO3 was well dispersed in the PP matrix. Also, the transition enthalpy of CaCO3/PP increased and the full-width of half maximum of the crystallization peak decreased regardless of SLS coating and size of CaCO3. However, the crystallinity of PP was more influenced by nano CaCO3. These results imply that the nano CaCO3 coated with SLS may reduce the brittleness of polymer composites.
실험 계획법을 이용한 Knee Bolster System의 민감도 분석
송준영(Junyoung Song),여태정(TaejungYeo) 한국자동차공학회 2002 한국자동차공학회 Symposium Vol.2002 No.11
Knee bolster system, composed of knee bolster reinforcement and U brackets, is designed against knee impact<br/> regulation (FMVSS208). FEM is effective in improving system performance in design stages. In this study, the<br/> performance sensitivities of U brackets (energy absorption) and knee bolster reinforcement are analyzed using DOE<br/> and FEM. 5 main factors are selected and designmatrix of DOE is built using 3-level orthogonal arrays. Femur loads<br/> and knee intrusion displacements are calculated by FEM in each case. From the FEM results, sensitivities are<br/> evaluated. KIP index (Knee Impact Performance Index) is introduced to defined knee impact performance with<br/> respect to system mass (cost). Using this KIP index, optimization level of a system can be compared more<br/> objectively.
압력센서 기반의 균형시스템을 이용한 노인균형 특성 연구
권일호(Ilho Kwon),송준영(Junyoung Song),김도예(Doye Kim),손제영(Jeyoung Son),신원섭(Wonseob Shin) 한국HCI학회 2018 한국HCI학회 학술대회 Vol.2018 No.1
본 연구는 건강한 노인을 대상으로 압력정보제공과 자세정보제공에 따른 시각적 바이오-피드백에 대한 효과를 알아보는 목적으로 Randomized Cross-over Design 으로 연구되었다. 25 명의 노인 참가자를 대상으로 실험하였으며 3 가지 시각적 바이오-피드백의 조건에 무작위 순서로 할당하였다: 압력정보제공에 대한 시각적 바이오-피드백(Condition 1), 자세정보제공에 대한 시각적 바이오-피드백(Condition 2), 비시각적 바이오-피드백(Condition 3). 균형측정을 위해 Wii Balance Board(WBB)와 Balencia software ver 2.0 을 사용하였다. 방법으로 모든 대상자는 3 가지 시각적 바이오-피드백 상태에서 WBB 에 눈을 뜬 상태로 30 초 동안 정적 균형을 측정하였다. Condition 1 은 엄지발가락, 첫 번째와 다섯 번째 발가락허리뼈의 머리부분, 뒤꿈치 아래에 압력센서를 부착한다. 센서로부터 수집된 압력정보는 2m 앞의 LED 에 표시되며, 대상자는 불이 들어온 위치를 보고 체중을 이동시킨다. Condition 2 는 전신거울을 이용하여 자신의 자세를 보며 똑바른 자세를 유지하도록 노력한다. Condition 3 는 시각적 정보없이 2 m 앞에 벽을 보고 스스로 균형을 유지하도록 노력한다. 실험결과 Sway length 와 velocity 에서 모두 시각적 바이오-피드백에 따른 유의한 차이가 있었다 (p<.05). 결론적으로, 압력정보제공에 따른 정적균형훈련은 실제적이고 구체적인 정보를 이용한 훈련으로 효과가 나타난다고 사료된다.
진난수발생기를 통해 Spur 성분을 줄이는 4GHz 위상 고정 루프
이어진(Eo-Jin Lee),송준영(Junyoung Song) 대한전자공학회 2019 대한전자공학회 학술대회 Vol.2019 No.11
This paper proposes a phase locked loop(PLL) that reduces reference spur by using true random number generator(TRNG). In conventional PLLs, a frequency component of the reference clock appears spurious tones in a frequency component of the voltage controlled oscillator(VCO) output. In the proposed PLL, the TRNG randomly delays the UP/DOWN signals from the Phase-Frequency Detector(PFD). The randomly delayed signals output an inconsistent timing of charging/discharging at the output of the Charge Pump(CP). As a result, the CP output disperses the reference spur of the VCO output by making the reference clock frequency component uneven. The proposed PLL achieves -56.6dB spur reduction and consumes 15.84mW at 4GHz with 1.2V supply in a 65nm CMOS technology.
안종찬(Jongchan An),송준영(Junyoung Song) 대한전자공학회 2019 대한전자공학회 학술대회 Vol.2019 No.11
A Phase Locked Loop(PLL) based on a two stage ring Oscillator is proposed in a 65nm CMOS technology. The proposed PLL is used for 28Gb/s ethernet interface. The proposed design reduces the power consumption of the oscillator using a two-stage oscillator. The two-stage ring oscillator provides a four-phase 7 GHz clock for a quarter-rate TX and RX. The power consumption is 3.365mW with 1.2-V supply voltage.