http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
감마선 이용 AEMA 도입 PCL 나노섬유의 제조 및 특성분석
서다은(Da-Eun Seo),정성린(Sung In Jeong),박종석(Jong-Seok Park),권희정(Hui-Jeong Gwon),안성준(Sung-Jun An),이병헌(Byoung Hun Lee),임돈순(Don-Sun Im),신흥수(Heungsoo Shin),임윤묵(Youn-Mook Lim) 한국고분자학회 2017 폴리머 Vol.41 No.1
폴리카프로락톤(polycaprolactone, PCL)은 생체적합성이 우수하고 시간이 지나면 체내에서 생분해되어 조직공학용 생체재료로 많이 사용되고 있다. 하지만, 소수성 표면과 낮은 세포 부착성을 나타내는 단점이 있다. 따라서 본 연구에서는 PCL 필름 및 전기방사를 통한 나노섬유 지지체를 제조하고 감마선을 이용하여 친수성과 양전하의 아민기를 갖는 2-아미노에틸메타크릴레이트(2-aminoethylmethacrylate, AEMA)로 표면을 개질하였다. 감마선을 이용하여 표면 개질된 PCL 필름과 나노섬유의 분석 결과, ATR-FTIR을 통해 감마선 선량과 반응 표면적이 증가할수록 표면의 아민기가 증가함을 확인하였다. 아민기의 증가로 인해 친수성이 증가했음을 확인하였고 단백질 흡착량이 정전기적 인력으로 인해 증가함을 확인하였다. 이를 통해 AEMA가 도입된 PCL 필름보다 나노섬유 지지체의 경우 세포적합성이 향상된 조직공학용 지지체로서의 응용 가능성이 매우 높을 것으로 기대된다. Polycaprolactone (PCL) has been applied to tissue engineering because it has excellent biocompatibility and biodegradable properties. However, there is a limit to hydrophobic surface and low cell adhesion, therefore the PCL requires surface modification for increasing hydrophilicity and cell adhesion capacity. In this study, PCL films and nanofibers were manufactured by solvent casting and electrospinning, respectively. They were modified by 2-aminoethylmethacrylate (AEMA) that had hydrophilicity and amine groups of positive charge using gamma-irradiation. The surface properties of AEMA-grafted PCL films and nanofibers were confirmed by ATR-FTIR, and amine groups were increased by surface area and gamma-irradiation dose. A significantly higher amount of negative-charged proteins adhered to hydrophilic and cationic surface of AEMA-grafted PCL nanofibers than that of AEMA-grafted PCL films, because of increased amine groups and electrostatic interaction. The results show that AEMA-grafted PCL nanofibers are possible to apply tissue engineering scaffolds.
자기회귀 교차지연 모형을 적용한 사회적 상호작용 불안과 우울의 관계
서다은(Da Eun Seo),김은정(Eun Jung Kim) 학습자중심교과교육학회 2023 학습자중심교과교육연구 Vol.23 No.4
목적 본 연구에서는 대학생 집단을 대상으로 사회적 상호작용 불안과 우울의 시간적 선행관계를 검토하고, 두 변인의 관계를 회피행동과 긍정정서가 종단적으로 매개하는지 검증하고자 하였다. 방법 본 연구의 종단적 설계를 고려하여, 사회적 상호작용 불안, 회피행동, 긍정 정서, 우울에 대한 자기보고식 설문을 3주 간격으로 총 4회 측정하였고, 모든 측정 시기에 참여한 대학생 201명(남자 52명, 여자 149명)을 대상으로 자기회귀 교차지연 모형 분석을 통해 순차적 매개효과를 검증하였다. 결과 첫째, 사회불안, 회피행동, 긍정정서, 우울은 시간에 따른 안정성을 나타냈다. 둘째, 회피행동이 긍정 정서에 미치는 영향을 제외한 모든 변인 간의 종단적 영향이 통계적으로 유의하였다. 셋째, 회피행동과 긍정 정서는 사회불안과 우울의 관계에서 각각 종단적으로 부분 매개효과를 나타낸 반면, 회피행동과 긍정 정서의 순차적 매개효과는 통계적으로 유의하지 않았다. 결론 본 연구의 결과는 단기 종단적 설계를 통해 사회적 상호작용 불안과 우울의 관계에서 회피행동과 긍정 정서의 매개효과를 검증하였다는 점에서 의의가 있으며, 사회불안장애를 겪고 있는 사람들에게 회피행동을 감소시키거나, 긍정 정서 경험을 증가시키는 것을 표적으로 한 치료적 개입이 추후 우울로의 발병을 예방하기 위해 고려되어야 할 중요한 요소임을 시사한다. Objectives The purposes of current study was to examine the longitudinal mediation effects of avoidance behaviour and positive affect in the relationship between social interaction anxiety and depression. Methods Considering the longitudinal design of this study, an online survey was presented four times in three weeks. And Social Interaction Anxeity Scale(SIAS), Liebowitx Social Anxiety Scale(LSAS), Positive Affect and Negative Affect Scale(PANAS), The Center for Epidemiologiacl Studies Depression Scale(CES-D) are used for measurement. Also, The mediating effect was examined through Autoregressive Cross-Lagged Modeling Analysis for 201 college students(male 52 and female 149) who participated in all measurement periods. Results First, social anxiety, avoidance behaviour, positive affect and depression was stable over time. Second, the longitudinal effects among all the variables were statistically significant, except for the effect of the avoidance behaviour on positive affect. Third, while the avoidance behaviour and positive affect displayed partial mediation effects in the relationship between social anxiety and depression, the sequential mediation effects of avoidance behaviour and positive affect were not statistically significant. Conclusions The results of this study are significant in that verified the mediation effects of avoidance behaviour and positive emotions in the relationship between social interaction anxiety and depression through short-term longitudinal design. Also, this study suggests that therapeutic intervention aimed at reducing avoidance behavior or increasing positive emotional experience in people suffering from social anxiety disorders is an important factor to be considered to prevent the onset of depression in the future.
가상 배경 제작을 위한 절차적 도시 생성 플러그인 UI 설계
서다은(Daeun Sur),조영대(Youngdae Cho),손우람(Wooram Son),장현국(Hyunkook Jang),이희연(Heeyoun Lee),김형석(Hyungseok Kim) 한국HCI학회 2024 한국HCI학회 학술대회 Vol.2024 No.1
본 연구에서는 가상 현실 및 영화 콘텐츠 제작을 위한 언리얼 엔진 기반의 자동 도시 생성 플러그인 UI 를 설계하고 제안하였다. 도시 생성 플러그인은 절차적 모델링을 기반으로 전통 도시 등을 생성할 수 있도록 하며, 복잡한 단계 없이 도시를 생성할 수 있는 직관적인 사용자 인터페이스를 중심으로 설계하였다. 도시 생성의 핵심 기능인 도시 생성, 소품생성, 저장 및 삭제 기능을 반영한 프로토타입을 제작하여 현재 서비스 되고 있는 플러그인 과의 비교를 통해 사용성 평가를 진행하였다. 분석 결과, 제안한 플러그인은 직관적이고 쉬운 사용이 가능하다는 결과를 얻었으며 세부 항목 지원의 개선이 필요함을 확인하였다. 이와 같은 결과를 바탕으로 직관적 플러그인의 사용성을 확인하였으며 이를 기반으로 향후 플러그인 제작에 활용될 수 있을것이다.
가상 의상 제작 간략화 서비스 설계- 메타버스, 제페토를 중심으로 -
류상현,서다은,김경목,반재은,허원회 국제문화기술진흥원 2022 The Journal of the Convergence on Culture Technolo Vol.8 No.5
전 세계를 혼란에 빠트린 코로나19로 인해 많은 기술과 콘텐츠들이 비대면으로 이루어지는 시대가 되었다. 그와 함께 메타버스 서비스의 인기 역시 나날이 증가하고 있으며, 하위 산업 중 하나인 가상 의상(아바타) 산업 역시 함께 성장하고 있다. 본 연구에서는 모바일 메타버스 서비스인 제페토에 업로드할 가상 의상을 제작하는 시스템을 설계하고 개발하였다. 이는 PC 환경에서 작동하는 프로그램을 거쳐야 하는 기존 서비스와 달리 모바일 디바이스를 통한 촬영과 간단한 조작만으로 제작이 가능하다. 본 시스템의 모든 작업을 모바일 환경에서 처리할 수 있다는 장점을 통해 외부 프로그램에 익숙하지 않은 소상공인 및 개인 사업자들이 3D 가상 의상 산업에 더 쉽게 접근할 수 있을 것이다.
방사선 기반에 의한 기계적으로 공극을 증가시킨 젤라틴이 도입된혈관조직공학용 PLLA/PLCL 나노섬유 지지체의 개발
정진오,정성인,서다은,박종석,권희정,안성준,임윤묵,신영민 한국방사선산업학회 2015 방사선산업학회지 Vol.9 No.4
Vascular tissue engineering has been accessed to mimic the natural composition ofthe blood vessel containing intima, media, and adventitia layers. We fabricated mechanicallyexpanded PLLA/PLCL nanofibers using electrospinning and UTM. The pore size of the mesheswas increased the gelatin immobilized AAc-PLLA/PLCL nanofibers (203.30±49.62 microns)than PLLA/PLCL nanofibers (59.99±8.66 microns) after mechanical expansion. To increasethe cell adhesion and proliferation, we introduced carboxyl group, and gelatin was conjugatedon them. The properties of the PLLA/PLCL nanofibers were analyzed with SEM, ATR-FTIR,TBO staining, and water contact angle measurement, general cell responses on the PLLA/PLCLnanofibers such as adhesion, proliferation, and infiltration were also investigated using smoothmuscle cell (SMC). During the SMC culture, the initial viability of the cells was significantlyincreased on the gelatin immobilized AAc-PLLA/PLCL nanofibers, and infiltration of the cellswas also enhanced on them. Therefore, gelatin immobilized AAc-PLLA/PLCL nanofibers andmechanically expanded meshes may be a good tool for vascular tissue engineering application.