http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
RUO$_2$/GaN 쇼트키 다이오드 형 자외선 수광소자
신상훈,정병권,배성범,이용현,이정희,함성호,Sin, Sang-Hun,Jeong, Byeong-Gwon,Bae, Seong-Beom,Lee, Yong-Hyeon,Lee, Jeong-Hui,Ham, Seong-Ho 대한전자공학회 2001 電子工學會論文誌-SD (Semiconductor and devices) Vol.38 No.10
사파이어 기판 위에 성장된 GaN위에 RUO₂/GaN 쇼트키형 자외선 수광소자를 설계, 제작하였다. 자외선 빛의 흡수율을 높이기 위해, MOCVD 다층구조는 undoped GaN(0.5 ㎛)in ̄-GaN(0.1 ㎛)/n+-GaN(1.5 ㎛)로 성장하였다. 성장층은 3.8×10/sup 18/ cm ̄³의 캐리어 농도와 283 ㎠/V· s의 이동도를 가진다. 500 ㎛내외의 직경을 가지는 메사구조를 형성하기 위해 ECR 식각한 후, n+-GaN층위에 Al으로 저항성 접촉을 하였다. 저항성 및 쇼트키 접촉 사이에 Si₃/N₄ 박막으로 절연한 이후 undoped GaN 층위에 RuO₂ 쇼트키 접촉을 하였다. 제작된 쇼트키 다이오드는 1.15×10/sup -5/ [Ω-㎠]의 접촉비저항을 가졌다. 제작된 다이오드는 역전압인 -5V에서 305pA의 낮은 누설전류를 확인하였는데, 이 값은 RuO₂ 쇼트키 금속증착에 의해 현저히 향상된 것이다. 광측정에서는 10/sup 5/의 자외선대가시광선 제거비와 365nm 파장에서 0.23A/W로 높은 응답도를 보인다. A RuO$_2$ Schottky photo-detector was designed and fabricated with GaN layers on the sapphire substrate. For good absorption of UV light, an epitaxial structure with undoped GaN(0.5 ${\mu}{\textrm}{m}$)/n ̄-GaN(0.1${\mu}{\textrm}{m}$)/n+-GaN(1.5${\mu}{\textrm}{m}$) was grown by MOCVD. The structure had the carrier concentrations of 3.8$\times$10$^{18}$ cm ̄$^3$, the mobility of 283$\textrm{cm}^2$/V.s. After ECR etching process for mesa structure with the diameter of about 500${\mu}{\textrm}{m}$, Al ohmic contact was formed on GaN layer. After proper passivation between the contacts with Si$_3$/N$_4$, was formed on undoped GaN layer. The fabricated Schottky diode had a specific contact resistance of 1.15$\times$10$^{-5}$ [$\Omega$.$\textrm{cm}^2$]. It has a low leakage current of 305 pA at -5 V, which was attributed by stable characteristics of RuO$_2$ Schottky contact. In optical measurement, it showed the high UV to visible extinction ratio of 10$^{5}$ and very high responsivity of 0.23 A/W at the wavelength of 365nm.
필드 플레이트 구조에 대한 GaN FET 항복전압특성 영향
장우진(Woojin Chang),김정진(Jeong-Jin Kim),배성범(Sung-Beom Bae),박영락(Young-Rak Park),문재경(Jae-Kyoung Mun),고상춘(Sang-Chun Ko) 대한전자공학회 2015 대한전자공학회 학술대회 Vol.2015 No.6
This paper presents various field plates (FPs) fabricated on GaN Field Effect Transistors (FETs) using AlGaN/GaN on sapphire substrates. GaN FETs with six different FPs were fabricated to compare with their FPs and lengths of FPs in terms of their breakdown voltage characteristics. The fabricated GaN FET with the gamma-shaped gate FP exhibited a breakdown voltage of 1190 V for a gate-to-drain spacing of 15㎛, while the GaN FET without any FP (a planar gate) showed a breakdown voltage of 1050 V for the same gate-to-drain spacing. For the GaN FETs with 10㎛ gate-to-drain spacing and gamma-shaped gate FPs, they were varied 0~2 ㎛ in the length of the gamma-shaped gate FPs and the GaN FET with 0.5㎛-length gamma-shaped gate FP showed more 50~140 V than the others. And in another processed wafer, the GaN FET with the source FP and the gamma-shaped FP together had a breakdown voltage of 1480 V more than 870 V with only the source FP for a gate-to-drain spacing of 16㎛.