http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PLC 시뮬레이션에서 Plant model 자동 생성을 위한 PLC Symbol 규칙
박형태,왕지남,박상철,Park, Hyeong-Tae,Wang, Gi-Nam,Park, Sang-Chul 한국시뮬레이션학회 2008 한국시뮬레이션학회 논문지 Vol.17 No.4
본 논문은 Programmable Logic Controller(PLC) 시뮬레이션을 하기 위한 공장 모델(Plant Model)을 자동으로 생성하는 절차에 대해 기술한다. PLC 프로그램은 공정을 제어하는 로직에 관한 정보이며 그 자체로 공장 모델에 대한 어떤 정보도 포함하고 있지 않기 때문에 시뮬레이션을 위해서는 PLC 프로그램에 대응하는 공장 모델이 반드시 필요하다. 지금까지 PLC 시뮬레이션을 위한 공장 모델은 사용자가 직접 구축하는 방식으로 모델링 되었으나 이는 많은 노력과 공정로직의 완전한 이해 및 시뮬레이션 지식이 요구된다. 이런 어려움을 극복하기 위해 논문은 PLC 프로그램의 심볼테이블(Symbol table)로부터 공장모델을 자동으로 생성하는 과정을 제안한다. 이를 위해P LC 심볼이 공장 모델의 생성을 위한 정보를 포함시키는 PLC 심볼의 작명 규칙을 제안한다. 입력된 심볼 리스트를 분석함으로써 공장 모델을 자동으로 추출할 수 있으며 간단한 예제 공정을 대상으로 구현해 본다. Proposed in the paper is an automated procedure to construct a plant model for PLC simulation. Since PLC programs only contain the control logic without the information on the plant model, it is necessary to build the corresponding plant model to perform simulation. Conventionally, a plant model for PLC simulation has been constructed manually, and it requires much efforts as well as the in-depth knowledge of simulation. As a remedy for the problem, we propose an automated procedure to generate a plant model from the symbol table of a PLC program. To do so, we propose a naming rule for PLC symbols so that the symbol names include enough information on the plant model. By analyzing such symbol names, we extract a plant model automatically. The proposed methodology has been implemented, and test runs were made.
I/O model 자동 생성을 위한 PLC symbol 구조
박형태,홍상현,왕지남,박상철 대한산업공학회 2008 대한산업공학회 춘계학술대회논문집 Vol.2008 No.5
Presented in the paper is a naming principle of PLC symbols to simulate the virtual factory that is interlocking the PLC logic code.The counterpart model in the simulator receives the PLC output signals and sends the renewed signals that is changed by the virtual device movements. Among the counterpart models, this paper employs the I/O model. To generate the I/O model automatically in aims to remove modeling error and to save time and effort, this paper proposes the naming principle of PLC signal to extract the information for the I/O model generation automatically. The simple example cell is implemented to test the proposed approach.
I/O model 자동 생성을 위한 PLC symbol 구조
박형태,홍상현,왕지남,박상철 한국경영과학회 2008 한국경영과학회 학술대회논문집 Vol.2008 No.5
Presented in the paper is a naming principle of PLC symbols to simulate the virtual factory that is interlocking the PLC logic code.The counterpart model in the simulator receives the PLC output signals and sends the renewed signals that is changed by the virtual device movements. Among the counterpart models, this paper employs the I/O model. To generate the I/O model automatically in aims to remove modeling error and to save time and effort, this paper proposes the naming principle of PLC signal to extract the information for the I/O model generation automatically. The simple example cell is implemented to test the proposed approach.
자동화 공정 제어 코드와 공장 모델 자동 생성을 위한 모델링 방법론
박형태,홍상현,왕지남,박상철 한국경영과학회 2009 한국경영과학회 학술대회논문집 Vol.2009 No.5
본 논문은 자동화 공정 제어 설계 및 시뮬레이션을 위한 모델링 방법론에 관련된다. 자동화 설비들로 구성된 공정은 Programmable Logic Controller(PLC) 라고 불리는 산업용 컴퓨터에 의해 제어 된다. 이런 제어 코드는 다양한 자동화 설비들을 상호 유기적으로 구동하는 운영 로직을 포함하고 있으며 이 운영로직의 검증은 안정된 양산 체제로 이르기 위해 반드시 필요하다. 본 논문이 제시하는 모델링 방법론은 설비의 계층적 구조와 설비가 취할 수 있는 상태의 정의, 그리고 상호운용하는 설비들 간의 순차적 구동을 기술 함으로써 자동화 설비들을 제어하기 위한 PLC 코드와 PLC 코드의 시뮬레이션을 위해 반드시 요구되는 공장 모델(Plant model)을 자동으로 생성하는데 그 목적은 둔다. 간단한 예제 공정의 적용을 통하여 제안하는 모델링 방법론의 가능성을 살펴 보았다.