http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
스크라바 TIG(Tungsten Inert Gas) 용접을 위한 겐트리형 용접 로봇의 SDI장치 및 모니터링 시스템 개발
박형삼(Hyeong-Sam Park),주동현(Dong-Hyun Ju),신세원(Se-Won Shin),황윤길(Yun-Gil Hwang),안기주(Ki-Ju Ahn) 한국정보기술학회 2020 한국정보기술학회논문지 Vol.18 No.8
Recently, the TIG welding robot monitoring system for shipbuilding scribing is trying to improve welding quality by checking in real time and taking appropriate and appropriate measures. In addition, the welding process and welding images through various suitable sensors and cameras are predicted, evaluated, and managed by measuring and analyzing results in real time. These systems are widely used for thin-plate welding in ship construction and scrubber and TIG welding, which are proposed as an alternative to environmental pollution control in IMO. In this paper, the quality monitoring of the TIG welding process for scribing fabrication is performed by real-time welding quality evaluation, and the actual welding site application case and data are made into DB to contribute to the improvement of welding quality.
국지성 호우 관측을 위한 FPGA 기반의 전파강수계 신호처리 설계
최정호,이배규,박형삼,박정민,임상훈,Choi, Jeong-Ho,Lee, Bae-Kyu,Park, Hyeong-Sam,Park, Jeong-Min,Lim, Sang-Hun 한국정보통신학회 2020 한국정보통신학회논문지 Vol.24 No.9
최근 서울 경기를 비롯한 전국에서 국지성 집중호우, 태풍 등 악천후 관련 자연재해가 증가함에 따라 이에 대한 방재 및 물관리 대책이 필요한 실정이다. 이러한 수재해를 관측하기 위해 사용되는 우량계는 지상의 강우를 연속적·직접적으로 측정할 수 있는 장점이 있는 반면, 우량계 미설치 영역에 대한 공간적인 강우 분포를 정확하게 제공할 수 없다. 이러한 문제를 해결하고자 강수의 공간분포를 측정할 수 있는 전자파 기반 센서인 전파강수계(EWRG, Electromagnetic Wave Rain Gauge)를 개발하였다. 본 논문에서는 전파강수계의 FPGA 기반 신호처리 설계 방법을 제안한다. 전파강수계의 신호처리는 크게 LFM 파형의 ADC 및 DDC와 펄스압축, 상관 계수 및 강수 파라미터 산정으로 설계하였다. 본 연구를 통해 LFM 파형과 펄스압축 신호를 이론적으로 분석하였으며, 전파강수계 신호처리 설계를 위해서 FPGA 기반의 신호처리 설계 및 검증을 수행하였다. Recently, the number of natural disasters caused by inclement weather conditions such as localized heavy rainfall, Typhoon, etc. is increasing in Korea, which requires relevant prevention and water management measures. Rain gauges installed on the ground have strengths in continuously·directly measures ground precipitation but cannot provide accurate information on spatial precipitation distribution in the areas without the rain gauges. The present research has designed and developed an electromagnetic-based multi-purpose precipitation gauge(EWRG, Electromagnetic Wave Rain Gauge) that can measure rainfall at the real time, by overcoming spatial representativeness. In this paper, we propose an FPGA-based signal processing design method for EWRG. The signal processing of the EWRG was largely designed by calculating the ADC and DDC of the LFM waveform, pulse compression, correlation coefficient and estimating the precipitation parameter. In this study, the LFM waveform and pulse compressed signal were theoretically analyzed.
고해상도 강수 관측을 위한 K-대역 전파강수계 송수신기 설계 및 구현
최정호,임상훈,박형삼,이배규,Choi, Jeong-Ho,Lim, Sang-Hun,Park, Hyeong-Sam,Lee, Bae-Kyu 한국정보통신학회 2020 한국정보통신학회논문지 Vol.24 No.5
이 논문은 강수의 공간분포를 측정할 수 있는 전자파 기반 센서를 개발하는 것이며, 악천후 관측의 핵심인 강우, 강설, 바람장을 동시 측정할 수 있는 전파강수계(EWRG, Electromagnetic Wave Rain Gauge)에 관한 것이다. 본 연구를 통해 LFM 방식의 송수신 신호를 이론적으로 분석하였다. 또한 전파강수계 송수신기를 개발하기 위해서 LFM 송수신기 설계 및 모의실험을 수행하였다. 본 논문은 소형 HMIC(Hybrid Microwave Integrated Circuit)를 사용하여 K-BAND 펄스 구동 형 6W SSPA(Solid State Power Amplifiers) 송수신기 개발을 하였다. 65도의 고온의 환경에서 1%의 짧은 Duty를 가지는 6W 이상의 출력파워, 5dB이하의 수신 NF(Noise Figure)를 가지고 있다. 제작된 모듈은 파형발생부가 내장되어 LFM과 Square Pulse파형을 방출하며 수신부는 40dB이상의 수신 이득을 가진다. 이 논문에서 개발된 송수신기는 다른 소형 기상 레이더에 적용할 수 있다. This paper is to develop an electromagnetic wave-based sensor that can measure the spatial distribution of precipitation, and to a electromagnetic wave rain gauge (hereinafter, "EWRG") capable of simultaneously measuring rainfall, snowfall, and wind field, which are the core of heavy rain observation. Through this study, the LFM transmission and reception signals were theoretically analyzed. In addition, In order to develop a radar transceiver, LFM transceiver design and simulation were conducted. In this paper, we developed a K-BAND pulse-driven 6W SSPA(Solid State Power Amplifiers) transceiver using a small HMIC(Hybrid Microwave Integrated Circuit). It has more than 6W of output power and less than 5dB of receiving NF(Noise Figure) with short duty of 1% in high temperature environment of 65 degrees. The manufactured module emits LFM and Square Pulse waveform with the built-in waveform generator, and the receiver has more than 40dB of gain. The transceiver developed in this paper can be applied to the other small weather radar.
정수기 빌트인용 SPM type BLDC 모터 토크제어를 위한 모터설계 및 약계자 제어기 설계에 관한 연구
주동현(Dong-Hyun Ju),허동렬(Dong-Ryol Hur),황윤길(Yun-Gil Hwang),박형삼(Hyeong-Sam Park),신동률(Ryul-Dong Shin) 한국산업기술융합학회(구. 산업기술교육훈련학회) 2023 산업기술연구논문지 (JITR) Vol.28 No.2
정수기 모터의 경우 일정 속도, 동기화 및 높은 토크 모터와 그 제어 및 가정용으로 저소음, 저 전력이 필수적이다. 다만 기존 교류모터는 기동 시 저토크인 단점이 있고, 고토크 모터인 DC 모터는 브러시 교체가 어렵고 소음이 심하며 모터 교체 시 브러쉬 때문에 유지·보수가 어렵다. 본 논문에서는 네오디뮴 자석이라고 불리는 고밀도 에너지 자석을 사용하여 저소음, 고효율인 다상 SPM(Surface Permanent Magnet) BLDC(Brushless DC) 모터를 설계·제어하고, 시동 중에 부피를 줄이고, 저소음 및 에너지 소비를 절감하는 고 효율을 가능하게 하며, 높은 토크를 제어할 수 있었다. 이에 본 논문은 약계자 방식을 이용하여 고속, 고토크 및 에너지 소비를 줄이고 저소음화가 가능한 BLDC 모터의 제어 및 설계를 제시하고자 한다. The system for water purifiers requires a motor with a constant speed, high torque, low noise, and low power. AC motors have low starting torque, and DC motors have difficulty in replacing brushes, generate noise, and are difficult to maintain. This study uses a high-density energy magnet called a neodymium magnet to design and control an SPM brushless DC (BLDC) motor to control high torque. This paper proposes the control and design of BLDC motors using the weak field method.
에너지 절감을 위한 전기 자동차용 고효율 독립 다상 IPM BLDC 허브모터 설계에 관한 연구
공대원(Dae-Won Kong),홍동일(Dong-Il Hong),안기주(Gi-Joo Ahn),박형삼(Hyeong-Sam Park) 한국조명·전기설비학회 2020 조명·전기설비학회논문지 Vol.34 No.8
For an electric car traction motor has the efficiency of high efficiency motor, travel, space features efficiency as it will be motor is hub motor is suitable and to address Independent multi-phase ipm bldc the motor development test, and the tester to work with the efficiency and performance through the power to black. In addition, the most important by car accident, a secondary accident prevention must be ensured. To that end, part of the motor failure, driven by repairs in place reliable motor to an existing Y, △ structure with an independent structure have I motor. So, multi-phase independent structure with a new type I ipm bldc want to identify the characteristics of the motor, and the development of verification.