http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
문희종,홍성기,임창환,Moon, Hee-Jong,Hong, Sung-Ki,Lim, Chang-Hwan 한국광학회 2011 한국광학회지 Vol.22 No.2
본 논문에서는 930 nm 대역 광섬유 결합 레이저 다이오드 여기광을 0.8 mm 두께의 얇은 디스크형 Yb:YAG 결정에 조사하여 레이저 발진 특성을 연구하였다. 구멍이 있는 구리판 사이에 레이저 결정을 고정시켜 발생된 열을 접촉 냉각시키는 구조를 채택하였고, 구리판 구멍 크기에 따른 조사 지점의 온도 변화를 발진 피크 스펙트럼 이동으로부터 조사하였다. 광섬유 결합 LD 여기 광에 대해 발진 레이저 출력은 기울기 효율 42.2%, 광변환 효율 34.8%로 높게 구현되었다. LD 여기 전류 및 구리판 구멍 크기가 증가함에 따라 여기광이 조사된 지점의 온도가 증가하였다. 구리판 구멍 크기가 결정 두께에 비해 상당히 큰 경우, 높은 여기광의 세기에서는 온도 상승이 선형 변화로부터 벗어남을 확인하였다. Operational and thermal characteristics of a thin disk Yb:YAG crystal with a thickness of 0.8 mm were studied using as a pumping source a fiber-coupled 930 nm laser diode. The heat generated in the crystal was dissipated by placing both surfaces in contact with copper plates with central hole, and the dependence of the temperature change in the illuminated spot on hole size was investigated by measuring the spectral change of the lasing peaks. The slope efficiency and optical-to-optical efficiency with respect to the LD pump power were as high as 42.2% and 34.8%, respectively. The temperature at the illuminated spot increased with diode current and with increasing hole size of the copper plate. When the hole size considerably exceeded the crystal thickness, the temperature rise deviated from the linear increase at high pump power.
다중모드 간섭기를 이용한 반도체 이중사각형 링 공진기에서의 단일모드 발진 특성
정달화,문희종,현경숙,Jeong, Dal-Hwa,Moon, Hee-Jong,Hyun, Kyung-Sook 한국광학회 2009 한국광학회지 Vol.20 No.1
다중모드 간섭기를 이용한 반도체 이중사각형 링 공진기에서의 단일 파장 모드 발진특성을 관찰하였다. 실험에 사용된 공진기의 에피택시는 발진 중심파장이 $1.55{\mu}m$인 InGaAsP-InP 다중양자우물 구조를 활성층으로 사용하여 제작되었다. 공진기의 구조는 다중모드 간섭기를 결합기로 이용한 이중사각형 링 공진기이며 발진특성을 측정하였다. 여러 가지 구조 변수를 즉 공진기의 구조 및 크기, 다중모드 간섭기의 길이를 변화시키며 실험을 진행하였다. 실험 결과 다양한 크기와 구성에서 단일파장모드선택 특성이 잘 나타남을 확인할 수 있었다. We report the spectral characteristics of Multimode Interferometer (MMI)-coupled semicondoctor square ring resonators. The epitaxial layers of the proposed semiconductor ring resonator consists of $1.55{\mu}m$ GaInAsP-InP multiple quantum wells. The lasing characteristics were observed by varying the structure parameters of the MMI-coupled square ring resonators. It is concluded that the MMI-coupled scheme selects a single spectral lasing mode in the double square ring cavities.
Cr⁴+ : YAG 포화 흡수체를 이용한 레이저 다이오드 뒷면 여기 Nd : YAG 레이저의 들뜸 효율 및 Q-switching 특성 연구
정태문(Tae-Moon Jeong),김광석(Kwang-Suk Kim),문희종(Hee-Jong Moon),이종훈(Jong-Hoon Yi),김철중(Cheol-Jung Kim),이종민(Jongmin Lee) 한국광학회 1998 한국광학회지 Vol.9 No.4
레이저 다이오드 뒷면 여기 방식을 이용한 Nd:YAG 레이저를 제작하고, 뒷면 여기 방식을 이용하였을 때, 들뜸 효율을 측정하였다. 포화 흡수체로 Cr⁴+:YAG를 레이저 공진기 내부에 설치하여 수동형 Q-switching을 수행하였고, 그 때, 평균 출력, 펄스폭 및 반복율 특성등을 조사하였다. 수동형 Q-switching된 레이저의 펄스폭 및 반복율은 평균 출력 및 Cr⁴+:YAG결정의 낮은 강도 투과율(low intensity transmission)에 따라 변화하였으며, 평균 출력은 최고 1W, 펄스폭은 최저 51 nsec까지 얻을 수 있었고 최고 약 40㎑의 고반복율로 동작하는 것을 관찰하였다. Passively Q-switched, laser diode(LD) end-pumped Nd:YAG laser was demonstrated by using Cr⁴+:YAG as a saturable absorber. In addition, we could calculate an excitation efficiency, which is an important parameter to evaluate the pumping geometry, directly by measuring the absorbed power in Nd:YAG at threshold condition. We found that output parameters such as average power, pulse duration, and repetition rate strongly depended on the low intensity transmission of Cr⁴+:YAG and driving current of laser diode. The maximum Q-switched output power of 1 W was obtained with 40㎑ repetition rate. The pulse duration was varied from 50 ns to 200 ns.