http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김철우(Cheol Woo Kim),문종성(Jong Sung Moon),김정규(Jung Gyu Kim),맹철수(Cheol Soo Maeng),성기광(Ki Kwang Sung),김현민(Hyun Min Kim) 대한기계학회 2016 대한기계학회 춘추학술대회 Vol.2016 No.12
Since the top mounted in-core instrumentation (TM-ICI) system has abilities to cope with severe accidents for simple configuration and no penetration of the reactor lower head, TM-ICI is under development in Korea. Therefore it needs development of the reactor internals for the TM-ICI. This paper introduces a finite element model of the reactor internals for TM-ICI and its dynamic characteristics for future structural response analyses.
김철우(Cheol-Woo Kim),문종성(Jong-Sung Moon),김정규(Jung-Gyu Kim),맹철수(Cheol-Soo Maeng),성기광(Ki Kwang Sung),김현민(Hyun-Min Kim) 대한기계학회 2018 대한기계학회 논문집. Transactions of the KSME. C, 산업기술과 혁신 Vol.6 No.1
상부탑재형 노내계측계통(top-mounted in-core instrumentation, TM-ICI)은 하부탑재형 노내계측계통(bottom mounted in-core instrumentation, BM-ICI)과 달리 원자로 하부 헤드에 관통부가 없고 구조가 단순하기 때문에 중대사고 발생 시 대처 능력을 향상시킬 수 있다. 국내 경수로 원전에서는 하부탑재형 노내계측계통을 채택하고 있기 때문에 중대사고 대응능력 향상을 위해 상부탑재형 노내계측계통 및 연계구조물의 설계를 개발 중에 있다. 본 논문에서는 현재 개발 중에 있는 TM-ICI의 연계 구조물인 원자로 내부구조물에 대한 유한요소 모델을 소개하고 동특성 해석 결과를 제시하였다. 본 논문에서 개발한 모델 및 결과는 다양한 하중에 대한 원자로내부구조물 응답해석에 적용할 수 있으며 상세 설계의 개선에 이용할 수 있을 것으로 기대된다. Since the top mounted in-core instrumentation (TM-ICI) system, which is different from the bottom mounted in-core instrumentation (BM-ICI), has simple configuration without penetration in the reactor lower head, it can improve the abilities to cope with severe accidents. Because domestic light water reactors have BM-ICI, TM-ICI is under development in Korea for improvement of ability to respond to severe accidents. This paper introduces a finite element model of the reactor internals for TM-ICI and its dynamic characteristics. The model and result in this paper are expected to be applied to response analysis for reactor internals of TM-ICI and to be used for improvement of detail design of TM-ICI component.
내부압력, 열하중 및 외부하중을 고려한 노즐의 2차원 및 3차원 해석 비교
윤효섭,김종민,맹철수,김현민,이대희,Yoon, Hyo-Sub,Kim, Jong-Min,Maeng, Cheol-Soo,Kim, Hyun-Min,Lee, Dae-Hee 한국전산구조공학회 2015 한국전산구조공학회논문집 Vol.28 No.3
본 논문에서는 원통형 쉘에 부착된 노즐의 구조 건전성평가를 수행하고 그 결과를 비교하기 위해 2차원(2D)과 3차원(3D) 해석이 수행되었다. 현재 원자력 발전소에서 사용되는 3개의 노즐을 구조 건전성평가를 위해 선정하였고, 각각 노즐은 내부압력, 온도변화 및 외부하중을 받는다. 내부압력에 대한 2D 해석은 1.5이상의 계수 값을 이용하거나 응력집중 계수를 적용하여야 하고, 온도변화에 대한 2D와 3D 해석결과는 피복재의 유무와 상관없이 서로 거의 비슷하며, 외부하중에 대한 WRC Bulletin 297에 의한 해석결과는 3D 해석결과보다 더 보수적임을 확인할 수 있었다. In this paper, the two-dimensional(2D) and three-dimensional(3D) analyses have been performed in order to evaluate the structural integrities and compare 2D and 3D results for nozzles attached to cylindrical shells. Three nozzles, which are currently used in the nuclear power plant, are chosen to evaluate the structural integrities, and each nozzle is subjected to internal pressure, temperature variation and external loads. It is found that the 2D analysis for internal pressure should be performed with a factor of more than 1.5 or a stress concentration factor; 2D and 3D analysis results for temperature variation are almost similar to each other regardless of cladding; and the analysis results for external loads by WRC Bulletin 297 are more conservative than the 3D analysis results.