http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
블록형 Ni-Cr-Al 분말 다공성 소재의 미세조직 및 인장 변형 거동
김철오,배정석,이기안,Kim, Chul-O,Bae, Jung-Suk,Lee, Kee-Ahn 한국분말야금학회 2015 한국분말재료학회지 (KPMI) Vol.22 No.2
This study investigated the microstructure and tensile properties of a recently made block-type Ni-Cr-Al powder porous material. The block-type powder porous material was made by stacking multiple layers of powder porous thin plates with post-processing such as additional compression and sintering. This study used block-type powder porous materials with two different cell sizes: one with an average cell size of $1,200{\mu}m$ (1200 foam) and the other with an average cell size of $3,000{\mu}m$ (3000 foam). The ${\gamma}$-Ni and ${\gamma}^{\prime}-Ni_3Al$ were identified as the main phases of both materials. However, in the case of the 1,200 foam, a ${\beta}$-NiAl phase was additionally observed. The relative density of each block-type powder porous material, with 1200 foam and 3000 foam, was measured to be 5.78% and 2.93%, respectively. Tensile tests were conducted with strain rates of $10^{-2}{\sim}10^{-4}sec^{-1}$. The test result showed that the tensile strength of the 1,200 foam was 6.0~7.1 MPa, and that of 3,000 foam was 3.0~3.3 MPa. The elongation of the 3,000 foam was higher (~9%) than that (~2%) of the 1,200 foam. This study also discussed the deformation behavior of block-type powder porous material through observations of the fracture surface, with the results above.
음성 및 진동 신호의 DSP FFT 처리 모듈 제작 및 조명 제어에 관한 연구
김철오(Cheol-Oh Kim),임계영(Kye-Young Lim) 한국조명·전기설비학회 2011 한국조명·전기설비학회 학술대회논문집 Vol.2011 No.5월
본 연구에서는 TI사의 DSP를 사용하여 음성 또는 진동 입력신호를 FFT 처리하는 통신 형 모듈을 제작해 보았는데, 통신 프로토콜은 산업용으로 많이 사용하는 모드버스 통신 방식을 사용하였다. 컴퓨터를 사용하지 않고 소형으로 제작하여, 산업용 PLC, PC 및 임베디드 장치와 접속하여 FFT 처리 데이터를 쉽게 사용할 수 있으며, 조명 제어에 활용 및 전자 제품의 양산 품질 관리, 시설물 고장 판별 등에도 활용이 가능하다. 본 논문에서는 FFT 신호 처리 일반 동작과 모드버스 통신에 대해서 살펴보고, FFT 처리 결과를 컴퓨터로 표시해주는 시험 프로그램을 제작하여 사용하였으며, 이 FFT 데이터를 조명 장치와 연동하여 응용하는 예에 대해서도 살펴본다. FFT 처리는 컴퓨터 음악 재생 등 여러 가지 응용에 많이 보급되어 있으나, 산업 현장에서 통신형으로 연결하여 사용하고자 하는 경우, 소형 단독형 입수가 어려워 본 모듈을 제작하였다.
김철오(Cheol-Oh Kim),임계영(Kye-Young Lim) 한국조명·전기설비학회 2011 한국조명·전기설비학회 학술대회논문집 Vol.2011 No.5월
무대 조명, 경관 조명 등에 많이 사용하는 DMX512 통신 방식은 차동 방식의 2선식 통신 방식을 사용하는데, 유선 작업이 곤란한 환경에서는 무선 통신 방식으로 연결할 필요가 있는데, 본 연구에서는 시중에서 구입이 용이한 지그비 또는 불루투스 무선 모듈을 사용한 dmx512 무선 데이터 전송 방식에 대해서 살펴보았다.. 무선은 유선에 비해서 통신 데이터가 중간에 손실되기 쉽고, 통신 속도도 유선에 비해 느리므로, 에러 검출 보강 및 통신 프로토콜을 최대한 단순화시켜 가급적 빠르게 동작 시킬 필요가 있다. 본 연구에서는 무선을 유선으로 변경 전송하는 경우의 통신 동작과 통신 속도 차이로 인한 문제점, 그리고 시중에 판매되는 통신모듈을 사용하는 경우 설정 문자로 인한 모드 변경 등에 대해서 살펴본다.