Analysis of stress distribution of tooth restored with metal-ceramic crown covering abfraction lesion according to its finish line location under occlusal load

김지환,윤철욱,김태현,김한성,우대곤,이근우,심준성,Kim, Jee-Hwan,Yoon, Chol-Wook,Kim, Taehyeon,Kim, Han-Sung,Woo, Dae-Gon,Lee, Keun-Woo,Shim, June-Sung The Korean Academy of Prosthodonitics 2014 대한치과보철학회지 Vol.52 No.4

목적: 다양한 원인으로 발생된 Abfraction 병소가 있는 치아를 금속도재관으로 수복 할 경우, 변연의 위치에 따라 예후가 다양해질 수 있다. 수복물의 장기적 성공을 검증하기 위해서는 응력분포의 분석이 필요하지만 금속도재관이 abfraction 병소의 적응증인 경우 금속도재관이 응력 분포에 미치는 영향을 밝히는 연구는 아직 없다. 본 연구의 목적은 abfraction 병소가 있는 치아를 수복하는 금속도재관이 바람직한 응력 분포를 나타낼 수 있는 조건을 알아 보고자 함이다. 재료 및 방법: 치아, 주위 조직과 금속 도재관의 외형을 반영한 2차원 유한 요소모델을 제작하고 144 N의 편심 교합력 하에서의 응력분포를 유한요소 분석법으로 분석하였다. 금속 도재관의 변연 위치를 쐐기모양의 결손부의 하연에(Group 0), 그리고 결손부의 하연보다 1 mm 하방(Group 1)과 2mm 하방(Group2)에 위치시켰다. 결과: Group 0에서 von Mises stress는 금속 도재관의 변연과 결손부의 첨부에 집중 되었고 협측 변연의 응력은 설측 부위로 분포되었다. Group 1과 Group 2에서의 응력분포양상은 비슷하게 나타났다. 응력은 결손부의 첨부에 집중되지만 협측과 설측의 응력띠는 서로 분리된 양상으로 나타났다. 결론: 금속도재관의 변연을 Abfraction 병소의 하연에 설정할 경우, 금속도재관은 Abfraction 병소의 첨부에 응력을 집중시킨다. Purpose: When the full veneer crown was treated in the tooth with abfraction lesion due to various causes, the prognosis of it may be compromised according to the location of the finish line, but there is few study about the location of its buccal finish line. The purpose of this study was to investigate the effect of location of the finish line of the full veneer crown on stress distribution of the tooth with abfraction lesion. Materials and methods: The two dimensional finite element model was developed to express tooth, surrounding tissue and full veneer crown. The stress distribution under eccentric 144 N occlusal load was analyzed using finite element analysis. The location of finish line was set just at the lower border of the lesion (Group 0), 1 mm (Group 1) and 2 mm (Group 2) below the lower border of the lesion. Results: In the Group 0, von Mises stress was concentrated at the finish line and the apex of the lesion. Also, the stress at the bucal finish line propagated to the lingual side. In the Group 1 and Group 2, stress distribution was similar each other. Stress was concentrated at the apex of lesion, but the stress at the buccal finish line did not propagate to the lingual side. That implied decrease of the possibility of horizontal crown fracture. Conclusion: Full veneer crown alleviated the stress concentrated at the apex of the abfraction lesion, when the finish line of full veneer crown was set below the lower border of abfraction lesion.

Escherichia coli에서 효소활성을 지닌 Human HtrA3 단백질 제조와 HtrA Serine Protease 1, 2와의 효소활성 비교

김지환,김구영,남민경,김상수,임향숙,Kim, Ji-Hwan,Kim, Goo-Young,Nam, Min-Kyung,Kim, Sang-Soo,Rhim, Hyang-Shuk 한국미생물학회 2009 미생물학회지 Vol.45 No.4

본 연구에서는 Human HtrA3 (HtrA3)의 효소활성을 분자수준에서 연구하기 위해 HtrA간의 상동성과 기존에 알려진 maturation site들을 비교 분석하여 예상 mature HtrA3인 M1-HtrA3와 M2-HtrA3를 발현하는 construct를 제작하였다. pGEX system을 통해 Top10 균주에서 발현, 정제한 M1-HtrA3 단백질은 $10{\mu}g$/L를 정제할 수 있었으며 발현량 대비 1%를 회수할 수 있었다. M2-HtrA3는 M1보다 5배 가량 많은 양을 정제할 수 있었으며 발현량 대비 회수율은 3배 정도 더 높았다. $\beta$-Casein을 이용한 in vitro cleavage test를 통해 M1, M2 form 모두 protease 활성을 갖는 것을 확인하였다. 또한, $\beta$-casein cleavage를 통해 HtrA serein protease들 간의 상대적인 활성을 비교한 결과, HtrA3와 HtrA2는 HtrA1보다 약 2배 더 높은 proteolytic cleavage 활성을 보였다. 본 연구에서 정립한 protease 활성을 지닌 HtrA3의 제작과 정제 조건은 HtrA3의 substrate를 탐색을 용이하게 할 수 있을 것이며, HtrA3 연관된 질환의 발병기전과 세포 신호전달을 이해하는 연구에 활용될 수 있을 것이다. To elucidate HtrA3's functional roles in the HtrA3 mediated cellular processes, it is necessary to investigate its biochemical characteristics. In the present study, we constructed the plasmids encoding putative mature HtrA3 proteins (M1-HtrA3 and M2-HtrA3) based on the putative maturation sites of highly homologous HtrA1 and mouse HtrA3. We used the pGEX bacterial expression system to develop a simple and rapid purification for the recombinant HtrA3 protein. Although yields of the mature HtrA3 proteins were slightly low as 10~50 ${\mu}g$/L, the amounts and purity of M1- and M2-HtrA3 were enough to investigate their proteolytic activities. The putative mature HtrA3 proteins have proteolytic activity which could cleave $\beta$-casein as an exogenous substrate. We compared the proteolytic activity between the HtrA family, HtrA1, HtrA2, and HtrA3. The cleavage activity of HtrA3 and HtrA2 were 2 folds higher than that of HtrA1, respectively. Our study provides a method for generating useful reagents to identify natural substrates of HtrA3 in the further studies.

플렉서블 디스플레이용 저온공정을 갖는 대향 타겟식 스퍼터링 장치를 이용한 ZrO₂ 가스 차단막의 특성

김지환,조도현,손선영,김화민,김종재,Kim, Ji-Hwan,Cho, Do-Hyun,Sohn, Sun-Young,Kim, Hwa-Min,Kim, Jong-Jae 한국전기전자재료학회 2009 전기전자재료학회논문지 Vol.22 No.5

$ZrO_2$ film was deposited by facing target sputtering (FTS) system on polyethylene naphthalate (PEN) substrate as a gas barrier layer for flexible organic light emitting devices (FOLEDs), In order to control the heat of the FTS system caused by the ion bombardment in the cathode compared with the conventional sputtering system, the process characteristics of the FTS apparatus are investigated under various sputtering conditions such as the distance between two targets ($d_{TT}$), the distance between the target and the substrate ($d_{TS}$), and the deposition time. The $ZrO_2$ film by the FTS system can reduce the damage on the films because the ion bombardment with high-energy particles like gamma-electrons, Moreover, the $ZrO_2$ film with optimized condition ($d_{TT}$=140 mm) as a function of the distance from center to edge showed a very uniform thickness below 5 % for a deposition time of 3 hours, which can improve the interface property between the anode and the plastics substrate for flexible displays, It is concluded that the $ZrO_2$ film prepared by the FTS system can be applied as a gas barrier layer or an interlayer between the anode and the plastic substrate with good properties of an uniform thickness and a low deposition-temperature.

나노입자 국소 플라스몬파의 영상화 기술

김지환,Kim, Ji-Hwan 한국광학회 2011 광학과 기술 Vol.15 No.1

팔물군자탕 가미방으로 호전된 재발성 아프타성 구내염 및 한포진 환자 치험 1례

김지환,Kim, Ji Hwan 사상체질의학회 2020 사상체질의학회지 Vol.32 No.2

Introduction This study is the first case report to observe a significant improvement of clinical symptoms of both Recurrent Aphthous Stomatitis(RAS) and pompholyx treating with modified Palmulgunja-tang for Soeum-type. Case presentation A 37-year-old female patient complained of pain by ulcers on her mouth and tongue, and of itching caused by vesicles on her palms and soles was diagnosed with RAS, pompholyx, and, especially moderate pattern of 'Congestive Hyperpsychotic symptomatology' according to the theory of Sasang Constitutional Medicine(SCM). During inpatient and outpatient treatment, she took modified Palmulgunja-tang, and was treated with acupuncture, moxibustion, and cupping therapy. The effectiveness of these therapies was assessed with subjective Neumeral Rating Scale(NRS) and Dyshidotic Eczema Area and Severity Index(DASI). Conclusion After the treatment according to the theory of SCM, NRS, and DASI score about RAS and pompoholyx was decreased, and the general condition of the patient also has improved.

급성 두드러기로 인한 학질양 발열을 보이는 소양인 치험례

김지환,손한범,배효상,박성식,Kim, Ji-Hwan,Son, Han-Beom,Bae, Hyo-Sang,Park, Seong-Sik 사상체질의학회 2014 사상체질의학회지 Vol.26 No.1

Objectives The purpose of this case study is to report the effect of Sasang constitutional therapy about chill and fever pattern of malaria by acute urticaria. Methods This Soyangin patient is treated by herbal prescriptions, venesection, and acupuncture therapy according to the change of symptoms. When fever is severe, adequate medical supportive treatments such as normal saline intravenous injection, sedative or anti-histamine are provided for the patient. Results & Conclusions The patient's symptoms of acute urticaria and general conditions were improved after using Yangdokbaekho-tang and Hwagam. However, chill and fever pattern of malaria was continued so that Hyungbangpaedok-san and Dokhwaljihwang-tang for Soyangin's lasting malaria symptom were medicated to the patient. Accordingly, chill and fever pattern lasting about one month was successfully eliminated after herbal treatment.

서브 마이크론급 구형 동분말의 볼 밀링을 통한 플레이크 동분말의 제조

김지환,이종현,Kim, Ji Hwan,Lee, Jong-Hyun 한국마이크로전자및패키징학회 2014 마이크로전자 및 패키징학회지 Vol.21 No.4

직경 수 마이크론급의 Ag 코팅 Cu 플레이크를 제조하기 위한 선행공정으로 습식 화학적 합성법으로 제조된 서브마이크론급의 Cu 입자를 볼 밀링 공정을 통해 프레이크화 하였다. 입자들의 산화 및 응집을 막기 위해 볼 밀링 유체로는 에틸렌글리콜을 사용하였고, 에틸아세테이트 표면개질제도 첨가하였다. 용기의 회전수에 따른 실험 결과를 통해 회전수에 따른 회전 모드의 변화가 밀링 후 Cu 입자들의 평균적인 형상과 형상 균일도를 크게 변화시킴을 확인할 수 있었다. 또한 첨가한 지르코니아 볼의 직경 역시 Cu 입자들의 플레이크화 균일도를 결정하는 대표 공정변수임을 확인할 수 있었다. 그 결과 다소간의 응집체를 포함한 서브마이크론급의 Cu 입자를 사용했음에도 불구하고, 회전수, 표면개질제 첨가량, 그리고 지르코니아 볼의 직경 등의 대표 공정변수들을 최적화한 볼 밀링 공정을 통해 분산성이 우수한 수 마이크론급의 Cu 플레이크를 성공적으로 제조할 수 있었다. As a preceding process for preparing several micrometer sized Ag-coated Cu flakes, ball milling of submicrometer-sized Cu particles synthesized through a wet chemical method was performed in order to convert the particles into flakes. To suppress oxidation and aggregation of the particles during ball milling, ethylene glycol and ethyl acetate were used as a medium and a surface modifying agent, respectively. Results obtained with different rotation speeds of a jar indicated that the rotation speed changes a rotating mode, and strikingly alters the final shapes and shape uniformity of Cu particles after milling. The diameter of zirconia ball was also confirmed. Although there was aggregates in the initial submicrometer-sized Cu particles, therefore, well-dispersed Cu flakes with a size of several micrometers were successfully prepared by ball milling through optimization of rotation speed, amount of ethyl acetate, and diameter of zirconia ball.

특정 호흡수에서 행한 통제호흡이 심박변이도에 미치는 영향

김지환,김병수,박성식,이용재,금나래,배효상,Kim, Ji-Hwan,Kim, Byoung-Soo,Park, Seong-Sik,Lee, Yong-Jae,Keum, Na-Rae,Bae, Hyo-Sang 사상체질의학회 2016 사상체질의학회지 Vol.28 No.2

Objectives We observed what effects of Paced Breathing(PB) in specific respiration rate have on heart rate variability (HRV) according to Sasang Constitution.Methods HRV of 72 healthy participants in sitting position was recorded while they carried out usual breathing, 0.2Hz, 0.1Hz, and 0.05Hz PB each 5 minutes in consecutive order. Five minute of relaxation was permitted between each breathing. Finally, HRV indices were statictically analyzed of 32 participants (SOEUM: 11, SOYANG: 10, TAEEUM: 11) after data out of accord with respiration rate or outliers were excluded.Results and Conclusions According to respiration rates, there was no statistical significance of HRV among Sasang Constitution. Regardless of Sasang Constituion, 0.2Hz PB increased mean heart rate and decreased natural logarithmic low frequency(lnLF) oscillation of HRV without the change of natural logarithmic high frequency(lnHF), while 0.1Hz PB increased lnLF and standard deviation of N-N interval(SDNN), and slightly decreased lnHF without the change of mean heart rate. 0.05 Hz PB also showed the same effect as 0.1Hz PB, but was impracticable.

자동 대소문자 식별을 이용한 영어 음성인식 결과의 가독성 향상

김지환,Kim, Ji-Hwan 대한음성학회 2007 말소리 Vol.61 No.-

A modified speech recogniser have been proposed for automatic capitalisation generation to improve the readability of English speech recognition output. In this modified speech recogniser, every word in its vocabulary is duplicated: once in a de-caplitalised form and again in the capitalised forms. In addition its language model is re-trained on mixed case texts. In order to evaluate the performance of the proposed system, experiments of automatic capitalisation generation were performed for 3 hours of Broadcast News(BN) test data using the modified HTK BN transcription system. The proposed system produced an F-measure of 0.7317 for automatic capitalisation generation with an SER of 48.55, a precision of 0.7736 and a recall of 0.6942.

음성 자료에 대한 규칙 기반 Named Entity 인식

김지환,Kim Ji-Hwan 대한음성학회 2006 말소리 Vol.58 No.-

In this paper, a rule-based (transformation-based) NE recognition system is proposed. This system uses Brill's rule inference approach. The performance of the rule-based system and IdentiFinder, one of most successful stochastic systems, are compared. In the baseline case (no punctuation and no capitalisation), both systems show almost equal performance. They also have similar performance in the case of additional information such as punctuation, capitalisation and name lists. The performances of both systems degrade linearly with the number of speech recognition errors, and their rates of degradation are almost equal. These results show that automatic rule inference is a viable alternative to the HMM-based approach to NE recognition, but it retains the advantages of a rule-based approach.