http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
반응면 기법을 이용한 초음속 전투기 날개의 다학제간 다점 설계
김유신(Y. S. Kim),김재무(J. M. Kim) 한국전산유체공학회 2004 한국전산유체공학회 학술대회논문집 Vol.2004 No.-
In this study, the multidisciplinary aerodynamic~structural optimal design is carried out for the supersonic fighter wing. Through the aeroelastic analyses of the various candidate wings, the aerodynamic and structural performances are calculated such as the lift coefficient, the drag coefficient and the deformation of the wing. In general, the supersonic fighter is maneuvered under the various flight conditions and those conditions must be considered all together during the design process. The multi-point design, therefore, is deemed essential. For this purpose, supersonic dash, long cruise range and high angle of attack maneuver are selected as representative design points. Based On the calculated performances of the candidate wings, the response surfaces for the objectives and constraints are generated and the supersonic fighter wing is designed for better aerodynamic performances and less weights than the baseline. At each design point, the single-point design is performed to obtain better performances. Finally, the multi-point design is performed to improve the aerodynamic and structural performances for all design points. The optimization results of the multi-point design are compared with those of the single-point designs and analyzed in detail.
김유신(Y.S Kim),전창훈(C.H Jun),김명훈(M.H Kim),최형식(H.S Choi) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
This paper aims at the development of shoes measuring the performance of walking or running, which is<br/> equipped with electronic devices. In the in-sole of the shoes, a piezoelectric sensor is inserted for measuring<br/> the number of steps and the speed of walking. The measured signals are processed by the one-chip microprocessor<br/> and related electronic devices. Using the data, the momentum and calories of walking and running<br/> are calculated, and the results are transmitted to the displaying system composed of LCD by the RF<br/> telecommunication system.
압력조건의 변화에 따른 PEMFC의 성능 시뮬레이션 및 설계에 관한 연구
김홍건(H. G. Kim),김유신(Y. S. Kim),김홍열(H. Y. Kim),양성모(Y. M. Yang),나석찬(S. C. Nah) 한국생산제조학회 2005 한국공작기계학회 추계학술대회논문집 Vol.2005 No.-
Fuel cells are devices that convert chemical energy directly into electrical energy. Among many kinds of the fuel cell, Polymer electrolyte membrane fuel cell is such kind of thing which work under low temperature. Unfortunately, there are still many problems to be solved in order to make them into commercial use, such as the thermal and water management in working process of Polymer electrolyte membrane fuel cell. To solve the difficulties facing the researcher, the analysis of the inner mechanism of Polymer electrolyte membrane fuel cell should be implement as much as possible, mathematical modeling is an important tool for the reach of the fuel cell especially with the combination of experiment. By regarding some of the assumptions and simplifications, using the finite element technique, a two-dimensional electrochemical mode is created in this paper for the further comparison with experiment data. Based on the principals of the problem, the equation of electronic charge conservation equation, gas-phase continuity equation, and mass balance equation are used in calculating. In the end, the model results indicate the some of the phenomenon in the unit cell, and the relationships of potential and current density.
대학생의 취업선호도와 창업의도에 관한 사회적 영향관계 분석
김유신(Kim, Yu Shin),성창수(Sung, Chang-Soo),박주연(Park, Joo Y) 한국창업학회 2018 한국창업학회 Conferences Vol.2018 No.2
국내 고용시장의 분절화 현상이 심화되고 있다. 이러한 원인 중 하나로 대기업과 중소기업의 생산격차가 크기 때문에 대학생들은 창업 보다는 보다 안정적인 취업을 선호한다. 이러한 선택 의 기준을 경제적, 비경제적 또한 직업에 대한 정보를 위해 구인과 구인과정에서 중요한 행동을 하게 된다. 본 연구의 목적은 공과대학생을 대상으로 취업을 선호하는 원인과 추후 창업의도를 향상시키기 위한 사회적 영향요인에 대해 알아보고자 한다. 특히 부모, 지인, 개인의 창업경험과 취업 및 창업동아리 경험 등 사회적 영향관계가 취업을 선호하는 학생들의 진로선택 미치는 영향관계를 규명하고자 한다. 이를 위해 창업교육을 이수한 공과대학생 중 향후 진로를 취업으로 선택한 학생을 대상으로 질적 연구방법을 적용하였다. 취업을 선호하는 공과대학생 12명을 대상으로 집중 그룹 인터뷰(FGI)를 실시하였으며 주제묶음과 질문의 유사성을 분석한 후 구조화 하였다. 연구결과, 공학계열 학생의 취업 선호 이유로 안정적인 수입, 기업만의 시스템 경험, 부모님의 취업선호, 자금부족과 창업에 대한 지식부족 등으로 나타났다. 또한 취업을 선호한 학생들의 사회적 영향관계 중 지인의 창업경험에 따라 창업의도가 높아지는 것으로 나타났다. 본 연구 결과를 통해 현재는 창업의도가 낮은 학생일지라도 지인 및 주변 사회적 영향관계에 따라 창업에 대한 이해와 창업의도가 향상될 수 있음을 알 수 있다. 부족한 자금 및 사회 경험 등으로 인한 두려움과 취업을 선호하는 사회적 인식 및 관계가 학생들의 진로선택에 영향을 미친다는 본 연구결과는 실패를 두려워하지 않는 기업가정신 교육 확대와 창업에 대한 인식전환이 필요함을 시사한다. The purpose of this study is to investigate the negative effects of the career decision on career intentions and to find out the reasons why they prefer to work and the effect of parents, acquaintances, and individual entrepreneurship experience, I want to know. In the study, students preference for employment was due to stable income, system experience of the company, lack of knowledge about parents job preference, lack of funds, lack of entrepreneurship and influence of later acquaintances Respectively. Based on these results, the implications and implications of the negative effects on the entrepreneurship and entrepreneurship intention of the college students were presented.
박영민(Y. M. Park),정진덕(J. D. Chung),김유신(Y. S Kim),최성욱(S. W. Choi) 한국전산유체공학회 2004 한국전산유체공학회 학술대회논문집 Vol.2004 No.-
Numerical optimization method of long endurance airfoil has been performed with a RSM(Response Surface Method) for smart UAV wing design. For the base line airfoil, NACA 64621 airfoil was selected and optimized to satisfy long endurance condition for smart UAV, Aerodynamic coefficients required for RSM are obtained by using 2-D Navier-Stokes solver with Spalart- Allmaras turbulence model. The optimized airfoil showed increased maximum lift and endurance factors together with reasonable thickness ratio.