http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이종접합 실리콘 태양전지 적용을 위한 선택적 전하접합 층으로의 전이금속산화물에 관한 연구
김용준,김선보,김영국,조영현,박창균,이준신,Kim, Yongjun,Kim, Sunbo,Kim, Youngkuk,Cho, Young Hyun,Park, Chang-kyun,Yi, Junsin 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.3
Hydrogenated Amorphous Silicon (a-Si:H) is used as an emitter layer in HIT (heterojunction with Intrinsic Thin layer) solar cells. Its low band gap and low optical properties (low transmittance and high absorption) cause parasitic absorption on the front side of a solar cell that significantly reduces the solar cell blue response. To overcome this, research on CSC (carrier Selective Contacts) is being actively carried out to reduce carrier recombination and improve carrier transportation as a means to approach the theoretical efficiency of silicon solar cells. Among CSC materials, molybdenum oxide ($MoO_x$) is most commonly used for the hole transport layer (HTL) of a solar cell due to its high work function and wide band gap. This paper analyzes the electrical and optical properties of $MoO_x$ thin films for use in the HTL of HIT solar cells. The optical properties of $MoO_x$ show better performance than a-Si:H and ${\mu}c-SiO_x:H$.
김용준(Yongjune Kim),서일성(Ilsung Seo),고일석(Il-Suek Koh),이용식(Yongshik Lee) 한국전자파학회 2016 한국전자파학회논문지 Vol.27 No.6
본 논문에서는 준등각 맵핑 기반 전자기파 투명화 구조의 산란 단면적(Scattering Cross Section: SCS)을 최소화 시키는 설계 방법을 제시한다. 준등각 맵핑에 기반하여 설계한 전자기파 투명화 구조를 사각형 형태로 잘라낸 뒤 경계면 밖의 굴절률과 내부의 1미만인 굴절률을 자유 공간으로 근사하는 방법을 사용함으로써 구현하기 어려운 굴절률 문제를 해결하였다. 사각형 형태의 크기는 시뮬레이션을 통해 전자기파 투명화 구조를 적용한 마름모형 금속 물체의 산란 단면적이 최소가 되도록 최적화하였다. 설계된 자유 공간형 전자기파 투명화 구조를 3D 프린터를 이용하여 제작, 산란파 저감특성을 전자기장 스캐너를 이용하여 실험적으로 검증하였다. A design method is proposed to minimize the scattering cross section(SCS) of the electromagnetic cloak based on the quasi-conformal mapping. Often times in such cloaking structures, parts that require refractive index below one are approximated with free space because of the difficulty involved with realization. In this process, preformance degradation is inevitable. In this work, the size of the cloak is optimized to compensate for the deterioration, and thus to minimize the scattering cross section of a diamond shaped conductor. Proposed cloak is fabricated using a 3D printer, and verified by measuring the cloaking performance of a diamond shaped aluminum target.