http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
반복하중에 대한 웨브전이형 다이아그리드 노드의 구조적 특성
김영주,정인용,주영규,김상대,Kim, Young Ju,Jung, In Yong,Ju, Young K.,Kim, Sang Dae 한국강구조학회 2009 韓國鋼構造學會 論文集 Vol.21 No.3
다이아그리드 노드의 지진 및 바람에 의한 반복하중에 대한 구조성능을 해석적으로 평가하는 것은 용접특성의 반영이 어려워서 한계가 있다. 이 연구에서는 횡하중을 받는 다이아그리드 노드의 구조거동을 알아보기 위해 다이아그리드의 노드부를 축소한 모형을 이용해 실험을 수행했다. 실험체는 총 5개이며 실험의 변수는 각 부분의 용접방법, 측면스티프너와 가새 웨브의 겹침길이이다. 한쪽 대각가새에는 인장력을, 다른쪽 대각가새에는 압축력을 가하는 반복가력 실험을 수행하였다. 실험 결과 주요 파괴 원인은 축력과, 방향이 상이한 두 힘의 합력으로 인한 부가적 모멘트에 의한 작용으로 나타났다. 인장력에 의해서 가새 부재의 플랜지가 파단하였고, 압축력에 의해서 가새 플랜지의 국부좌굴이 일어났다. 또한 겹침길이와 용접타입은 초기 강성, 항복 내력 및 에너지 흡수능력에 영향을 미치는 것으로 나타났다. The results of the analysis of the structural behavior of diagrid nodes that were subjected to cyclic loads such as wind and earthquakes was not fully understood due to difficulties in considering the welding type. In this study, diagrid nodes were tested to determine their behavior when they are subjected to seismic or wind loads. Five specimens were designed and fabricated. The corresponding test parameters were the welding type for each point and the length of the overlap of the side stiffener and the brace web. Tensile force was applied to one diagrid brace member, and compression force was applied to the other diagrid brace member. Cyclic loading was applied until the failure. The test showed that failures are due to axial stress from axial force and the additional bending moment of the two combined axial forces that have different directions. Tensile failure was observed from the tensile force, and local buckling was observed from the compressive force at the flange of the brace member. In addition, the welding type and the length overlap affected the initial stiffness, the yielding stress, and the energy absorption of the diagrid node.
Re-188 이 표지된 황 교칠 ( Sulfur Colloid ) 제조와 생체내 분포
김영주,정재민,장영수,이용진,이동수,정준기,이명철,송영욱 ( Young Ju Kim,Jae Min Jeong,Young Soo Chang,Yong Jin Lee,Dong Soo Lee,June Key Chung,Myung Chul Lee,Yeong Wook Song ) 대한핵의학회 1998 핵의학 분자영상 Vol.32 No.3
Purpose: We evaluated the usefulness of Re-188 sulfur colloid for radiation synovectomy and therapy of intraperitoneal metastasis. Materials and Methods: We investigated the labeling efficiency of Re-188 sulfur colloid on various conditions. The stability of Re-188 sulfur colloid was observed at room temperature for 24 h and in human serum and synovial fluid for 72 h. The particle size distribution of Re-188 sulfur colloid was rneasured by filtering with various pore size filters. Animal experiment was performed in mice and rabbits. Results: The labeling efficiency of Re-188 sulfur colloid was 64,5+5.8% (n-5) at the conditions of sodium thiosulfate 40 mg, EDTA Nap.2HzO 0,8 mg, KReO< 0.8 mg at pH l. After purification, the radiochemical purity was higher than 99%. The stability of Re-188 sulfur colloid was high (>99%) at room temperature for 24 h and in human serum and synovial fluid for 72 h. The particle size distribution of Re-188 sulfur colloid was 0.3% (<1 pm), 11.2% (1-5 pm), 35.8% (5-10 pm) and 52.8% (>10 pm). In mice, 1 h postinjection of Re-188 sulfur colloid into tail vein, uptakes in lung, liver and muscle were 37.30-5.36, 32.33+5.79, 6.60+0.02% 1D/organ respectively. After I.p. injection in rnice, the uptakes of extraperitonial organs of Re-188 sulfur colloid at 1 and 24 h were 0.1+0.1, 0.4+0.1% ID/organ, and the excretions through urine and feces (-70 h) were low (2.68+0.80, 0.95+0.17%). When Re-188 sulfur colloid was injected to synovial space of rabbit, the uptake in other organs except knee was very low. Conclusion: Re-188 sulfur colloid showed high labeling efficiency, stability and potency for clinical use. (Korean J Nucl Med 1998;32:298-304).
Sodium Hypochlorite 처리와 광도 및 복토 깊이의 차이가 부들의 종자 발아에 미치는 영향
김영주,허진아,황용수,구자형,Kim Young-Ju,Heo Jin-Ah,Hwang Yong-Soo,Ku Ja-Hyeong 한국잔디학회 2005 한국잔디학회지 Vol.19 No.2
부들종자는 종간에 차이가 없이 $20^{circ}$C에 비해 $25^{circ}$C와 $30^{circ}$C에서 더 높은 발아율을 보였고, 약광하에서 보다 강 광하에서 높은 발아율을 보였다. 발아 온도 20, 25, $30^{circ}$C에서 무처리 종자의 발아율은 가장 낮은 광도인 $7.5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ 에서 좀부들이 각각 4.3, 13.0, $7.3\%$였고, 애기부들 10.7, 22.7, $50.7\%$였다. 이에 비해 가장 높은 광도인 79.5${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$에서는 발아온도가 $30^{circ}$C일 경우에 좀부들은 $78.3\%$, 애기부들은 $88.7\%$의 높은 발아율을 보였다. NaOC1용액($4\%$ available chlorine) 처리는 낮은 온도 및 약 광에서의 발아를 크게 촉진시켰으며 발아시간을 단축시켰다. 무처리 종자의 경우 온도가 높아질수록 낮은 광도에서 발아율이 더 높아졌고 온도가 높아질수록 짧은 시간의 NaOC1 처리로 높은 발아율을 얻을 수 있었다. NaOC1 처리된 종자는 좀부들과 애기부들 모두 흙 표면 위에서 $100\%$의 발아율을 보였으나 무처리 종자는 각각 $40\%$와 $50\%$의 발아율 보였다. 복토깊이가 1cm 이상이 되면 1개월 이상 발아가 진행되지 않았다. 종자발아 과정은 중경이 먼저 길게 나온 다음, 중경 끝에서 초엽과 주근이 발생하고 다음으로 측근이 발생되는 양상을 보였다. 부들류의 종자에 있어서 NaOC1 처리에 의한 발아촉진 효과는 종피의 탈색과 부식으로 인한 광흡수의 증대에서 기인되는 것으로 추측된다. The effect of sodium hypochlorite treatment on the germination of cattail (Typha spp.) seeds was investigated in growth chambers maintained on a 14-h photoperiod with various temperatures and light intensities. Germination rates of seeds were, in general, enhanced by the increase of light intensity and temperature regardless of cattail species. Seeds of T. oreientalis had 4.3, 13.0 and $7.3\%$ germination at temperatures of 20, 25 and $30^{circ}$C, respectively, under light intensity of 7.5${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. T. angustata showed higher germination rate, thus, 10.7, 22.7 and $50.7\%$ under same temperature and light environment. Under high light intensity of 79.5${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, the germination rates of T. oreintalis and T angustata were $78.3\%$ and $88.7\%$ at $30^{circ}$C, respectively. Scarification of seeds with NaOC1 ($4\%$, available chlorine) increased germination rate in both species, especially even at low temperature of $20^{circ}$C. Germination speed was also enhanced by NaOC1 treatment. High light intensity further increased the germination rate. When NaOC1 treated seeds were sowed on the soil surface in plastic house, the seedling emergence was nearly $100\%$. Untreated seeds of T. oreintalis and T. angustara showed 40 and $50\%$, respectively, in germination under same condition. However, when the depth of soil covering was over 1.0 cm, seedling emergence was retarded more than 1 month. On the process of seedling development, emergence of mesocoty1 occurred firstly and after than primary root and first leaf were developed on the end of elongated mesocotyl. These results suggest that the promotion of seed germination by NaOC1 pretreament may be induced from the increase of light absorptivity as well as water permeability through scarifying and bleaching the seed coat.
김영주,김용표,Kim, Young Ju,Kim, Yong Pyo 한국입자에어로졸학회 2017 Particle and Aerosol Research Vol.13 No.2
Policy direction for the management of air quality in Korea has been on the reduction of the average concentrations of the criteria air pollutants such as sulfur dioxide and fine particles. However, recently, risk based management of air pollutants becomes an important issue. In this study, to develop an effective air quality management policy direction in Korea, (1) the fourth Multiple Air Toxics Exposure Study (MATES IV) carried out in the South Coast Air Quality Management District (SQAQMD) in the USA is reviewed and (2) the results are compared with in these in Seoul and (3) policy directions are suggested. It was found that (1) systematic integrated study comprising of measurement, modeling, emission inventory estimation, and risk assessment was essential to estimate the health risk of air pollutants reliably, (2) cancer risk of diesel particle was dominant over other air pollutants, and (3) health risk based emissions were different from amount based emissions. It was suggested that (1) reducing the exposure from hot spots might important to reduce health risk from air pollutants and (2) an integrated air quality management administration system is important for the efficient management of air pollution.
In-line 타입 해저 세퍼레이터 내부 기-액 유동 연구
김영주(Yong-Ju Kim),우남섭(Nam-Sub Woo),전홍필(Hong-Pil Jeon),한상목(Sang-Mok Han),우타관(Ta-Kwan Woo),정성윤(Sung-Yoon Jeong),신정란(Jeong-Ran Shin),전영태(Yeong-Tae Jeon) 대한기계학회 2015 대한기계학회 춘추학술대회 Vol.2015 No.11
The implementation of subsea separation and liquid boosting is becoming a common development scheme for the exploration of deep water fields. Subsea separation system should reliable. To ensure successful operation in a wide range of 3-phase flow regime, without need for developments. A subsea separator can avoid or simplifying costly surface platforms of floating vessels, as well as being an efficient tool to enhance hydrocarbon production. One solution of interest is the separation and re-injection of water at the seabed to avoid bringing the water up to the surface facility. In this study, multiphase flow characteristics inside in-line type subsea separation system are investigated for the design of subsea separation system.