수업 지도안 분석을 통한 예비 교사의 수업 전문성 변화

김성원(Seong-Won Kim),이소율(Soyul Yi),이영준(Youngjun Lee) 한국컴퓨터정보학회 2020 韓國컴퓨터情報學會論文誌 Vol.25 No.1

본 연구에서는 TPACK 교육을 통해 예비 교사의 수업 전문성 변화를 분석하였다. 이러한 연구를 위하여 예비 교사 20명을 대상으로 김성원과 이영준(2019)에서 개발한 프로그래밍 기반 TPACK 교육 프로그램을 적용하였다. 수업 전문성 분석을 위하여 예비 교사가 작성한 수업 지도안을 분석 틀을 활용하여 분석하였다. 연구 결과, 1차 수업 지도안에서 예비 교사는 테크놀로지 활용이 저조하며, 지식을 전달하거나 실험하는 수업을 설계하였다. 2차 수업 지도안에서는 테크놀로지 활용이 증가하였지만, 교육적 맥락에 따라 테크놀로지가 활용되지 않았다. 3차 수업 지도안에서 모든 예비 교사가 테크놀로지를 교육적 맥락에 따라 활용하는 것을 확인할 수 있었다. 또한, 예비 교사의 수업 전문성은 통계적으로 유의한 향상이 나타났다. This study analyzed the change of teaching expertise of pre-service teachers through TPACK education. In this study, we applied a programming-based TPACK education program developed by Kim and Lee (2019) to 20 prospective teachers. To analyze the pre-service teachers’ teaching expertise analyzed the lesson plan prepared before, during and after applying the educational program. As a result, Few teachers use technology in lesson plan, and the design of the instructor-led or experiment to confirmed content in curriculum or textbook. The use of technology has increased in the second Teaching Plan, but the technology was not used depending on the educational context. In the third lesson plan, all pre-service teachers were able to use technology in an educational context. Moreover, the teaching expertise of the pre-service teacher showed a statistically significant improvement in the lesson plan. This study founded that the programming-based TPACK education program was effective in enhancing the teaching expertise of the pre-service teacher.

나노인덴테이션을 이용한 Ti(C_0.7N_0.3)-NbC-Ni 써멧 구성상의 경도평가

김성원,김대민,강신후,류성수,김형태,Kim, Seong-Won,Kim, Dae-Min,Kang, Shin-Hoo,Ryu, Sung-Soo,Kim, Hyung-Tae 한국분말야금학회 2008 한국분말재료학회지 (KPMI) Vol.15 No.6

The indentation technique has been one of the most commonly used techniques for the measurement of the mechanical properties of materials due to its experimental ease and speed. Recently, the scope of indentation has been enlarged down to the nanometer range through the development of instrumentations capable of continuously measuring load and displacement. In addition to testing hardness, the elastic modulus of submicron area could be measured from an indentation load-displacement (P-h) curve. In this study, the hardness values of the constituent phases in Ti($C_{0.7}N_{0.3}$)-NbC-Ni cermets were evaluated by nanoindentation. SEM observation of the indented surface was indispensable in order to separate the hardness of each constituent phase since the Ti($C_{0.7}N_{0.3}$)-based cermets have relatively inhomogeneous microstructure. The measured values of hardness using nanoindentation were ${\sim}20$ GPa for hard phase and ${\sim}10$ GPa for binder phase. The effect of NbC addition on hardness was not obvious in this work.

실리콘 나노선/다중벽 탄소나노튜브 Core-Shell나노복합체의 합성

김성원,이현주,김준희,손창식,김동환,Kim, Sung-Won,Lee, Hyun-Ju,Kim, Jun-Hee,Son, Chang-Sik,Kim, Dong-Hwan 한국재료학회 2010 한국재료학회지 Vol.20 No.1

Si nanowire/multiwalled carbon nanotube nanocomposite arrays were synthesized. Vertically aligned Si nanowire arrays were fabricated by Ag nanodendrite-assisted wet chemical etching of n-type wafers using $HF/AgNO_3$ solution. The composite structure was synthesized by formation of a sheath of carbon multilayers on a Si nanowire template surface through a thermal CVD process under various conditions. The results of Raman spectroscopy, scanning electron microscopy, and high resolution transmission electron microcopy demonstrate that the obtained nanocomposite has a Si nanowire core/carbon nanotube shell structure. The remarkable feature of the proposed method is that the vertically aligned Si nanowire was encapsulated with a multiwalled carbon nanotube without metal catalysts, which is important for nanodevice fabrication. It can be expected that the introduction of Si nanowires into multiwalled carbon nanotubes may significantly alter their electronic and mechanical properties, and may even result in some unexpected material properties. The proposed method possesses great potential for fabricating other semiconductor/CNT nanocomposites.

나노인덴테이션으로 측정한 Ti(C_0.7N_0.3)-WC-Ni 써멧 구성상의 경도

김성원,김대민,강신후,김형준,김형태,Kim, Seong-Won,Kim, Dae-Min,Kang, Shin-Hoo,Kim, Hyeong-Jun,Kim, Hyung-Tae 한국세라믹학회 2009 한국세라믹학회지 Vol.46 No.1

The constituent phases in Ti($C_{0.7}N_{0.3}$)-xWC-20Ni (wt%, x=5, 15, 25) cermets were characterized using nanoindentation in conjunction with observation of microstructure. The microstructure of cermet is composed of hard phase and binder phase, which gave rise to a wide range of hardness distribution when nanoindentation was carried out on the polished surface of cermets. Because of the inhomogeneous nature of cermet microstructure, observation of indented surface was indispensable in order to separate the hardness of each constituent phase. The measured values of hardness using nanoindentation were ${\sim}14\;GPa$ for the binder phase and ${\sim}24$ to 28 GPa for the hard phase, of which nanoindentation hardness was decreased with the addition of WC into Ti($C_{0.7}N_{0.3}$)-Ni system. In addition, the nanoindentation hardness of Ni binder phase was much higher than reported Vickers hardness, which could result from confined deformation of binder phase due to the surrounding hard phase particles.

이갈이 진단 및 조절용 구내장치의 개발과 신뢰도 조사

김성원,김미은,김기석,Kim, Seung-Won,Kim, Mee-Eun,Kim, Ki-Suk 대한안면통증구강내과학회 2005 Journal of Oral Medicine and Pain Vol.30 No.1

The purposes of this study were to develop and introduce a novel intraoral appliance for bruxism composed of power switch and biofeedback device and further to examine inter- and intra-reliability of the appliance prior to clinical tests. The newly-developed appliance consisted of detection sensors, a central processing unit (CPU), a reactor and a storage unit and a displayer. Compact-sized, waterproof switches were selected as bruxism detection sensor and any sensor activation by clenching or grinding event was processed at the CPU and transmitted, by radio wave, to the reactor and storage unit and triggered auditory or vibratory signal, subsequently producing biofeedback to the patient with bruxism. The data on bruxing event in the storage unit can be displayed on the computer, making it possible analyzing frequency, duration and nature of bruxism. Cast models were obtained from ten volunteers with normal occlusion to evaluate reliability of the appliances. For inter-operator reliability on the intraoral appliances, each operator of the two fabricated the appliance for the same subject and compared the minimal contact forces provoking auditory biofeedback reaction in vertical, lateral and central directions. Intra-operator reliability was also investigated on the appliances made by a single operator at two separate times with an interval of two days. Conclusively, the newly-developed appliance is compact and safe to use in oral circumstance and easy to make. Furthermore, it had to be proven reliability excellent enough to apply in clinical settings. Thus, it is assumed that this appliance with the processor and the storage of data and auditory or vibratory biofeedback function is available and useful to analyze and control bruxism.

순환유동층내 loop - seal 을 갖는 고체재순환부의 특성

김성원,남궁원,김상돈 ( S . W . Kim,W . NamKung,S . D . Kim ) 한국화학공학회 1996 화학공학의이론과응용 Vol.2 No.2

예천전단대 북동부 명호지역 엽리상 화강암류와 압쇄 편마암류에 대한 지구화학 및 Nd-Sr 동위원소 연구

김성원,이창윤,유인창,Kim, Sung-Won,Lee, Chang-Yun,Ryu, In-Chang 대한자원환경지질학회 2008 자원환경지질 Vol.41 No.3

북동 방향의 호남전단대는 한국의 옥천대 남쪽 경계와 선캠브리아기 영남육괴 사이를 지나는 광역적인 우수향 주향 이동 단층대로 동아시아의 두드러진 지나 변형의 방향과 평행하다. 이 논문에서는 호남전단대의 한 지류인 예천전단대 명호지역의 선캠브리아기 압쇄 석영-백운모 편마암과 엽리상 각섬석-흑운모 화강암의 지화학 및 Nd-Sr 동위원소자료를 보고하고자 한다. 엽리상 각섬석-흑운모 화강암류를 $SiO_2$ 대 $Na_2O+K_2O$의 분별도에 도시하면 $SiO_2$의 함량은 61.9-67.lwt% 그리고 $Na_2O+K_2O$의 함량은 5.21-6.99wt%로 화강섬록암 영역에 대부분이 점시된다. 선캠브리아기 압쇄 석영-백운모 편마암은 화강암의 영역에 점시된다. $SiO_2$에 대한 수정된 알칼리-라임 지수 및 Fe#($FeO_{total}/(FeO_{total}+MgO)$)에 의한 관계도에서 엽리상 각섬석-흑운모 화강암류는 캘크-알카리 계열의 마크네슘 성분이 우세한 코딜러리안(Cordilleran)형 중생대 화강암류의 지화학 특징과 잘 부합된다. 또한 이들 암석들은 $Al_2O_3/(CaO+Na_2O+K_2O)$가 $0.89{\sim}1.10$로 중알루미나에서 약한 고알루미나질의 I형에 해당한다 하지만, 원남층의 압쇄 편마암은 $1.11{\sim}1.22$의 과알루미나질을 보여준다. 연구지역 엽리상 각섬석-흑운모 화강암류 및 압쇄 편마암류의 미량원소 성분을 초생맨틀(Primitive mantle) 값으로 규격화한 거미 성분도상에서는 저장력 원소(large ion lithophile element)이며 불호정성 원소인 Rb, Ba, Th 및 U이 부화되어 있고 Ta, Nb, P, Ti 가 상대적으로 다른 원소보다 결핍되어 있으며 이러한 지화학적 특징은 호상형(Arc-type) 화강암류와 전형적인 활동성 대륙연변부의 지각물질로부터 유래한 화강암류와 유사하다. ${\varepsilon}_{Nd}(T)$와 Sr 초생값은 엽리상 각섬석-흑운모 화강암류가 상부지각의 기원물질로부터 형성된 마그마로부터 생성되었음을 지시해 주고 있다. 연구지역을 포함한 영주저반의 엽리상 각섬석-흑운모 화강암류는 전단대에서 멀어지면서 변형에 의한 특정 원소들(Ti, P, Zr, V 및 Y)의 변화경향이 관찰되지 않는다. 이러한 원인으로, 많은 유체를 가지고 있는 엽리상 각섬석-흑운모 화강암류에서는 전단운동 변형동안 전단대 내와 외부의 유체의 흐름에 의한 질량 전달이 동일하게 일어나 암석 내의 부피변화 및 지화학 변질들을 야기 시키지 않았을 것으로 추정된다. The NE-trending Honam shear zone is a broad, dextral strike-slip fault zone between the southern margin of the Okcheon Belt and the Precambrian Yeongnam Massif in South Korea and is parallel to the trend of Sinian deformation that is conspicuous in Far East Asia. In this paper, we report geochemical and isotopic(Sr and Nd) data of mylonitic quartz-muscovite Precambrian gneisses and surrounding foliated hornblende-biotite granitoids near the Myeongho area in the Yecheon Shear Zone, a representative segment of the Honam Shear Zone. Foliated hornblende-biotite granitoids commonly plot in the granodiorite field($SiO_2=61.9-67.1\;wt%$ and $Na_2O+K_2O=5.21-6.99\;wt%$) on $SiO_2$ vs. $Na_2O+K_2O$ discrimination diagram, whereas quartz-muscovite Precambrian orthogneisses plot in the granite field. The foliated hornblende-biotite granitoids are mostly calcic and calc-alkalic and are dominantly magnesian in a modified alkali-lime index(MALI) and Fe# [$=FeO_{total}(FeO_{total}+MgO)$] versus $SiO_2$ diagrams, which correspond with geochemical characteristics of Cordilleran Mesozoic batholiths. The foliated hornblende-biotite granitoids have molar ratios of $Al_2O_3/(CaO+Na_2O+K_2O)$ ranging from 0.89 to 1.10 and are metaluminous to weakly peraluminous, indicating I type. In contrast, Paleoproterozoic orthogneisses have peraluminous compositions, with molar ratios of $Al_2O_3/(CaO+Na_2O+K_2O)$ ranging from 1.11 to 1.22. On trace element spider diagrams normalized to the primitive mantle, the large ion lithophile element(LILE) enrichments(Rb, Ba, Th and U) and negative Ta-Nb-P-Ti anomalies of foliated hornblende-biotite granitoids and mylonitized quartz-muscovite gneisses in the Yecheon Shear Zone are features common to subduction-related granitoids and are also found in granitoids from a crustal source derived from the arc crust of active continental margin. ${\varepsilon}_{Nd}(T)$ and initial Sr-ratio ratios of foliated hornblende-biotite granitoids with suggest the involvement of upper crust-derived melts in granitoid petrogenesis. Foliated hornblende-biotite granitoids in the study area, together with the Yeongju Batholith, show not changing contents of specific elements(Ti, P, Zr, V and Y) from shear zone to the area near the shear zone. These results suggest that no volume changes and geochemical alterations in fluid-rich foliated hornblende-biotite granitoids may occur during deformation, which mass transfer by fluid flow into the shear zone is equal to the mass transfer out of the shear zone.

국내 주요 검색 포털의 디렉터리 서비스 정보자원 선정 및 분류작업 개선방안

김성원,Kim, Sung-Won 한국과학기술정보연구원 과학기술정보센터 2005 Journal of Information Science Theory and Practice Vol.36 No.4

인터넷을 통한 정보의 유통량은 크게 증가하였으나 정보의 저장, 유통, 그리고 검색의 비효율성이 상존하고 있으며, 이를 보완하기 위한 방안으로 상당수의 검색 포털은 분류체계에 따라 정보자료를 조직화하여 제공하는 디렉터리 서비스를 제공하고 있다. 이 연구에서는 국내의 대표적 인터넷 검색 포털에서 제공되고 있는 디렉터리 서비스의 실제 분류작업을 살펴보고, 이를 기반으로 디렉터리 서비스의 개선안을 제시하였다. While the amount of information exchanged through internet has dramatically increased recently, certain inefficiencies still exist with regard to the storage, distribution, and retrieval of information. As a means of improving efficiency in accessing information, many search portals provide directory services to present organized guidance to information, based on the classification schemes. This study examines the classification activities practiced by the major search portals in Korea and makes some suggestions to improve the quality of directory services.

서브마이크론/나노 크기의 SiC 비율변화에 따른 ZrB₂-SiC 세라믹스의 열적, 기계적 특성

김성원,채정민,이성민,오윤석,김형태,Kim, Seongwon,Chae, Jung-Min,Lee, Sung-Min,Oh, Yoon-Suk,Kim, Hyung-Tae 한국세라믹학회 2013 한국세라믹학회지 Vol.50 No.6

$ZrB_2$-SiC ceramics are fabricated via hot pressing with different ratios of submicron or nano-sized SiC in a $ZrB_2$-20 vol%SiC system, in order to examine the effect of the SiC size ratio on the microstructures and physical properties, such as thermal conductivity, hardness, and flexural strength, of $ZrB_2$-SiC ceramics. Five different $ZrB_2$-SiC ceramics ($ZrB_2$-20 vol%[(1-x)SiC + xnanoSiC] where x = 0.0, 0.2, 0.5, 0.8, 1.0) are prepared in this study. The mean SiC particle sizes in the sintered bodies are highly dependent on the ratio of nano-sized SiC. The thermal conductivities of the $ZrB_2$-SiC ceramics increase with the ratio of nano-sized SiC, which is consistent with the percolation behavior. In addition, the $ZrB_2$-SiC ceramics with smaller mean SiC particle sizes exhibit enhanced mechanical properties, such as hardness and flexural strength, which can be explained using the Hall-Petch relation.

비선형 증발량 및 증발산량 시계열의 모형화를 위한 신경망-유전자 알고리즘 모형 2. 불확실성 분석에 의한 최적모형의 구축

김성원,김형수,Kim, Sung-Won,Kim, Hung-Soo 한국수자원학회 2007 한국수자원학회논문집 Vol.40 No.1

본 논문에서는 본 연구논제(2007)에서 개발된 COMBINE-GRNNM-GA(Type-1)으로부터 최적형태의 구조를 가진 모형을 구성하고, 입력층노드의 기상인자를 제거하기 위하여 불확실성 분석을 실시하였다. 훈련과정중에 가장 최소의 평활인자를 가진 입력층변수는 COMBINE-GRNNM-GA(Type-1)에서 제거되었으며, 변형된 COMBINE-GRNNM-GA(Type-1)은 기상학적 변수의 새로운 최소 평활인자를 구하기 위하여 재훈련된다. 최소 평활인자를 가지는 입력층 노드는 모형결과치에 대하여 가장 유용하지 않는 기상인자인 것을 암시하고 있다. 게다가, 민감하거나 민감하지 않은 기상인자들이 불확실성 분석을 통하여 선택되어진다. 최적 COMBINE-GRNNM-GA(Type-1)은 최소 비용과 노력으로 결측 혹은 미계측 증발접시 증발량과 계측되고 있지 않은 알팔파 기준증발산량을 산정하기 위하여 개발되었다 마지막으로 치적 COMBINE-GRNNM-GA(TyPe-1)을 이용하여 우리나라에서 전반적인 가뭄해석 및 관개배수 시스템 구축을 위한 참고자료를 제공할 수 있는 증발접시 증발량 지도 및 알팔파 기준증발산량 지도도 구축되어질 수 있다. Uncertainty analysis is used to eliminate the climatic variables of input nodes and construct the model of an optimal type from COMBINE-GRNNM-GA(Type-1), which have been developed in this issue(2007). The input variable which has the lowest smoothing factor during the training performance, is eliminated from the original COMBINE-GRNNM-GA (Type-1). And, the modified COMBINE-GRNNM-GA(Type-1) is retrained to find the new and lowest smoothing factor of the each climatic variable. The input variable which has the lowest smoothing factor, implies the least useful climatic variable for the model output. Furthermore, The sensitive and insensitive climatic variables are chosen from the uncertainty analysis of the input nodes. The optimal COMBINE-GRNNM-GA(Type-1) is developed to estimate and calculate the PE which is missed or ungaged and the $ET_r$ which is not measured with the least cost and endeavor Finally, the PE and $ET_r$. maps can be constructed to give the reference data for drought and irrigation and drainage networks system analysis using the optimal COMBINE-GRNNM-GA(Type-1) in South Korea.