http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김기채 대한전기학회 2002 전기의 세계 Vol.51 No.9
제작된 전기, 전자기기 및 시스템으로부터 발생되는 불요전자파(장해전자파)의 크기를 측정하기 위해서는 전자파장해 규제 규격에 명시된 측정기기 및 측정시설을 사용하여야 한다는 것을 이미 기술하였다. 이러한 측정기기 및 측정시설을 사용한 장해전자파의 측정법 또한 전자파장해 규제 규격에 명시된 측정방법을 따라야 한다. 본 장에서는 장해전자파의 시험법(측정법)에 관하여 간략히 설명하기로 한다.
김기채 한국전자파학회 2000 한국전자파학회논문지 Vol.11 No.8
본 논문에서는 전자계의 시간 변화 파형을 측정하기 위한 모노폴 안테나의 복소 안테나 인자 및 전달함수의 주파수 응답 특성 등을 논의하고 있다. 안테나에 흐르는 전류분포는 구분적 정현함수를 사용한 Galerkin의 모멘트법으로 계산하고 있으며 저주파수 대역에서는 반사를 줄이기 위해 칩저항을 접속한 경우의 복소 안테나 인자에 대하여 검토하고 있다. 이론 해석의 결과, 칩저항이 접속된 경우는 접속하지 않은 경우보다 복소 안테나 인자의 절대치는 5.6㏈정도 커진다는 것을 확인하였다. 또한, 주파수가 낮은 경우에 유용하게 사용할 수 있는 변형 복소 안테나 인자의 특성에 대해서도 논의하고 있다. 근역장 보정법으로 측정된 복소 안테나 인자와도 비교하여 이론 계산의 타당성을 확인하고 있다. This paper presents the characteristics of complex antenna factors of monopole antenna for the measuring time-domain fields above the ground plane. The method of moments with Galerkin's procedure is used to determine the current distribution of the antenna. The monopole antenna with chip resistor is discussed to reduce the reflection at low frequencies. Numerical results show that the magnitude of the complex antenna factor for the monopole with chip resistor is 5.6 dB as large as that of the conventional monopole antenna. The characteristics of the modified complex antenna factor to use the antenna factor are also treated at low frequencies. To verify the theoretical analysis, experimental results are compared with theoretical ones.
방사 전자파에 의한 미소 간극 방전원의 방전 전류파형 추정
김기채,이광식,이동인 한국전자파학회 2000 한국전자파학회논문지 Vol.11 No.2
본 논문에서는 미소 간극에서 방전이 일어날 때 발생하는 방사 전자파를 측정하여 이로부터 방전전류의 파형 을 추정하는 방법에 관하여 검토하고 있다. 시간영역 전자계 측정용 안테나를 사용하여 적절한 위치에서 관측한 측정 전계 또는 측정 자계로부터 방전전류를 추정하는 1 안테나 법(단일 전자계 법)과 2 안테나 법(복수 전자계 법)을 제시하고, 측정된 전계를 이용하여 1 안테나 법 및 2 안테나 법에 의한 방전전류의 파형을 추정(복원)하 고 였다. 추정된 방전 전류파형은 Wilson & Ma의 방전 전류 측정 결과와도 비교하여 본 논문에서 제시한 2가지 추정볍 이론의 타당성을 확인하고 있다. This paper presents the method for an estimation of discharge current waveshapes in short gap discharge by radiated electromagnetic fields. The method of current waveform estimation described is using the one antenna method(single field method) and two antennal method(complex field method) with a measured electric or magnetic fields at given field point by a time domain antenna. In order to verify the availability of the estimation theory, the discharge current waveshape estimation was performed by one and two antenna methods using the measured electric fields of Wilson & Ma and compared with experiments.
리액턴스 장하 강제 공진형 지향성 틸트 다이폴 안테나 소자
김기채,권익승,서영석,박용완 한국전자파학회 2000 한국전자파학회논문지 Vol.11 No.2
본 논문에서는 급전점에서의 입력 임피던스 정합을 위해 리액턴스 소자를 이용한 지향성 틸트 다이폴 안테나 소자의 기본 특성을 검토하고 있다. 방사 지향성의 틸트는 급전점의 위치를 적절히 선돼하여 설현시키고, 틸트각 을 크게 변화시키지 않으면서 안테나를 강제적으로 공진시킬 수 있도록 리액턴스 소자를 장하시키고 있다. 수치 계산 결과, 방사 지향성의 틸트각을 크게 변화시키지 않으면서 강제공진을 취할 수 있도록 하기 위해서는 리액턴 스 소자를 급전점 부판에 장하시켜야 한다는 것을 확인할 수 있었다. 제안한 안테나의 길이를 $0,8\lambda$, 급전점을 $0.2\lambda$로 선택하였을 경우, 주 지향성의 틸트각은 57.7도가 얻어졌으며 전력이득은 최대 8,6 dB를 얻을 수 있었다. This paper presents the basic characteristics of the beam tilting dipole antenna element in which one reactance element is used for the impedance matching at the feed point. The radiation pattern is tilted by the properly determined driving point position, and the loading reactance is used to obtain forced resonance without great changes in tilt angle. The numerical results demonstrate that the reactance element should be loaded in the region where the driving point is placed to obtain forced resonance of the antenna with little changes in beam tilt angle. In case the proposed forced resonant beam tilting antenna with $0.8\lambda$ length is driven at $0.2\lambda$ from the center, the main beam tilt angle o.5 57.7 degrees, the highest power gain of 8.6 dB are obtained.