파종기이동에 따른 두과작물의 생육특성 비교연구 제2보 콩, 팥, 녹두의 개화기 분포 및 결협율의 변이

김기준,김광호,김영희,Kim, K.J.,Kim, K.H.,Kim, Y.H. 한국작물학회 1981 Korean journal of crop science Vol.26 No.3

파종기이동에 따른 콩, 팥, 녹두의 개화기분포와 결협율의 변이를 알기 위하여 중부지방에서 널리 재배되고 있는 품종 하나씩을 공시, 5월 10일, 6월9일, 7월 9일 파종구 및 5월 10일 파종후 단일 처리한 구를 두어 시험한 결과를 요약하면 아래와 같다. 1. 각 처리별 개화까지의 일수, 개화기간 그리고 개화시에서 정엽출현까지의 일수를 비교한 결과 공시된 중 품종은 유한신육형에 그리고 팥과 녹두는 무한신육형에 속하는 것이었다. 2. 주당개화수 및 성숙협수는 3작물이 모두 7월9일 파종구 및 단일처리구에서 현저히 감소되었으나 결협율은 파종기에 따라서 일정한 경향 없이 콩 38\sim48%, 팥 23\sim34%, 그리고 녹두 46\sim60%였는데 콩과 녹두는 낙화 그리고 팥은 낙협이 각각의 결협률에 더 큰 영향을 주었다. 3. 콩은 어느 파종구에서든지 1회의 개화성기를 보인 반면 팥과 녹두는 극만파구민 7월9일 파종구를 제외하고는 2\sim3회의 개화성기를 보였고 개화최성기는 콩이 개화시로부터 10일 이내에 왔으나 팥과 녹두는 파종기에 따라서 개화시로부터 25\sim45일 사이에 왔다. 4. 개화기에 따른 성숙협수의 분포는 모든 처리구에서 개화분포와 비슷한 경향을 보였고 콩의 결협율은 개화최성기 직후에 핀 꽃들이 가장 낮았으며 그 이전 및 이후에 핀 꽃들이 점점 높은 값을 보였다. 팥과 녹두의 결협율은 각 개화성기 직전에 된 꽃들이 높았고 그 직후에 핀 꽃들이 낮은 값을 보였는데 7월 9일 파종구는 3작물에서 모두 시기적으로 늦게 핀 꽃일수록 결협률이 낮아졌다. 5. 중은 모든 파종구에서 정엽출현일을 전후로 한 5일 동안에 개화최성기를 보였으며 정엽전개 이전에 핀 꽃 및 여기서 생긴 성숙협수가 더 큰 비중을 차지한 반면 팥과 녹두는 정엽출현기와 개화 또는 결협간에 아무런 관계도 없었고 정엽전관 이후에 더 많은 꽃을 피웠다. Soybean, azuki-bean and mungbean were cultivated at different growing conditions, May 10, June 9, July 9 seeding, and May 10 seeding-short day treatment, to investigate the distribution of flowering date and the variation of pod/flower ratio. The growth habit type of the soybean variety used was determinate, but the azuki-bean and mungbean varieties used showed indeterminate growth habit. The pod/flower ratio ranged 38 to 48% for soybean, 23 to 34% for azuki-bean and 46 to 60% for mungbean along with growing conditions. Flower abscission for soybean and mungbean, and pod abscission for azuki-bean affected more on the number of matured pods. Soybean showed once full blooming period, but azuki-bean and mungbean showed two or three times full blooming period except July 9 seeding plot through the whole growing period. Flowers bloomed just after every full blooming period showed lower value of pod/flower ratio and higher pod/flower ratio was obtained from flowers bloomed before or far after full blooming at plots seeded May 10 and June 9 in three pulse crops. Most full blooming period of soybean coincided within 5 days near the terminal leaf appearance date, and number of flowers bloomed before terminal leaf expansion and matured pods from these flowers were major in every soybean plant at all growing codition plots. No relations were found between terminal leaf appearance and flowering or pod setting patterns of azuki-bean and mungbean.

지중케이블 활선검출기를 위한 자장 센서 개발

김기준,오용철,이경섭,정한석,김탁용,최미희,송민영,신철기,김진사,Kim, Ki-Joon,Oh, Yong-Cheul,Lee, Kyeong-Seob,Jung, Han-Seok,Kim, Tag-Yong,Choi, Mi-Hui,Soung, Min-Yeong,Shin, Cheol-Gi,Kim, Jin-Sa 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.2

We use the electrical energy and it is essential energy in modern life, but we lay cable underground due to the issue for environment and safety. Safety for worker is still insufficient for the development of safety equipment and related research has been focused on the cable lifetime diagnosis at underground cable work. I have to develop live line detector around the magnetic field were investigated at underground cable. In this paper, we were investigated by variation of coil turns and load due to detection of magnetic field at lines around. And detected value of developing products compared with measured value of milli-gauss meter. As a result, the value of the number of coil turns was found to be proportional to the measured value. But turn-numbers increase showed that the weak noise. I could be confirmed that sensor showed the optimum value from 4,000 to 5,0000.

전이성 척추 악성 종양의 진단 - 골스캔과 자기공명영상의 비교

김기준,손형선,박정미,정수교,이재문,김춘열,박용휘,신경섭 ( Ki Jun Kim,Hyung Sun Sohn,Jeong Mi Park,Soo Kyo Chung,Jae Moon Lee,Choon Yul Kim,Yong Whee Bahk,Kyung Sub Shinn ) 대한핵의학회 1994 핵의학 분자영상 Vol.28 No.3

Authors retrospectively compared the 99mTc MDP bone scans and corresponding MR imagings in 20 patients with histologically proven malignancy. Mean interval of the two studies was 16.6 days. Cancer diagnosis included 8 lung, 2 each of colon, breast, stomach, 1 each of prostate, thyroid, malignant lymphoma and 3 adenocarcinoma of unknown primary site. Of the 105 regions compared, 46 regions were positive for metast,ases in bone scans ar MR imagings. 30 regions(65.2%) were positive by bone scan and 44 regions(95. 7%) by MR imaging. 87 regions(82.9%) were concordantly positive or negative by bone scan and MR imaging, but 18 regions(17.1%) were discordant. In the discordant regions, 16 regions positive in MR imaging were negative in bone scan. The greatest number of discordant findings occurred in the cervica.l region and in the patient with stomach cancer. Our results suggest t.hat the sensitivity of MR imaging is great,er than that, of bone scan in det.ecting spinal metastases. And bone scan is useful screening test of metastasis for evaluting entire skeleton including spine.

Macroscopic 모형과 Microsimulation 모형의 연계

김기준,Kim, Gi-Jun 대한교통학회 2004 교통 기술과 정책 Vol.1 No.1

알레르기 비염에 대한 BOM건비소염탕(健脾消炎湯) 가미방의 치료효과 연구

김기준,이준석,Kim, Ki-Joon,Lee, Joon-Suk 대한한방안이비인후피부과학회 2009 한방안이비인후피부과학회지 Vol.22 No.1

Objective : We investigated the effects of BOM Gunbisoyeom-tang(Jianbixiaoyan-tang) Gamibang having prescribed clinically to patients with perennial allergic rhinitis. Methods : We prescribed BOM Gunbisoyeom-tang(Jianbixiaoyan-tang) Gamibang for 1 month to 77 patients visiting to KimKiJoon Orentalclinic BOM from January 1 to December 31, 2008 with perennial allergic rhinitis and analysised the questionnaire(symptom severity assessment) before and after treatment. Results : BOM Gunbisoyeom-tang(Jianbixiaoyan-tang) Gamibang improved significantly all nosal symptoms(sneezing, runny nose, congestion, itchy nose and postnasal drip), some non-nasal symptoms(eye and throat symptoms, headache and mental function) except chromic cough and ear symptoms and quality of life. Conclusion : BOM Gunbisoyeom-tang(Jianbixiaoyan-tang) Gamibang cured effectively patients with perennial allergic rhinitis by 1 month treatment but not perfectly. So further studies are needed for treatment duration and changes of pathological index before and after treatment.

N-propyl-N,N-dimethylethanolamine 반응에서 유동성 변화와 상전이에 관한 연구

김기준,성완모,이주엽,Kim, Ki-Jun,Sung, Wan-Mo,Lee, Joo-Youb 한국응용과학기술학회 2015 한국응용과학기술학회지 Vol.32 No.1

N-propyl-N,N-dimethylethanolamine의 용액을 만들기 위해 산성 조건 하에서 6분간 초음파처리하여 제조하였다. N-propyl-N,N-dimethylethanolamine 의 촉매 가수분해는 온도 $30{\sim}55^{\circ}C$에서 uni-lamellar vesicle과 uni-lamellar와 multi-lamellar가 뭉쳐진 혼합물에서 연구되었다. 이들의 차이는 촉매효과에 대해 multi-lamellar보다 uni-lamellar에서 영향이 크게 나타났다. Vesicle의 상전이 온도는 $37{\sim}44^{\circ}C$이며, multi-lamellar의 분자 입자의 크기는 uni-lamellar의 입자의 크기보다 크게 나타 났다. N-propyl-N,N-dimethylethanolamine was directly ultrasonicated in acidic water for 6 minute to give clear stock solutions. The catalytic hydrolysis of N-propyl-N,N-dimethylethanolamine was studied at $30{\sim}55^{\circ}C$ in the presence of uni-lamellar vesicle and mixture of uni- and multi-lamellar aggregates. The difference of rate between uni- and mixture was observed, where uni-lamellar reaction was more catalytic effect. The phase transition temperature of vesicle was $37{\sim}44^{\circ}C$. The particle size of multi-lamellar than that of uni-lamellar of biological membrane was measured more largely.

피복전선의 내부 열화 검출용 센서 개발

김기준,Kim, Ki-Joon 한국전기전자재료학회 2014 전기전자재료학회논문지 Vol.27 No.4

In this research, it have developed a sensor that could diagnose inner deterioration of covered wires. With this sensor it observed results from simulation, and the attribute required for realization. For simulation it have used FLUX, it have considered all of geometric and electromagnetic information from coil and base metal that influences eddy current sensor's property in order to predict the final result. It assumed there is no mutual inductance in the coil with N number of turns, because equivalent current flows in coil that is continuously connected in eddy current sensor. It assumed circular coil loop draws a circle, always have self inductance, and they are connected in series and overlapped according number of turns (N) in coil, and bobbin configuration. Actual sensor was produced with consideration of inductance and number of turns (N). In conclusion, it were able to test the dependency through results from simulation, actual measurement, and modeling of simulation. It is considered that attributes of respective base metal and structure can be predicted by simulating in advance.

자동차 배출가스 대책(III)

김기준,Kim, Gi-Jun 환경보전협회 1984 환경정보 Vol.6 No.4

자동차 배출가스 대책(II)

김기준,Kim, Gi-Jun 환경보전협회 1984 환경정보 Vol.6 No.3

지동차 배출가스 대책(IV)

김기준,Kim, Gi-Jun 환경보전협회 1984 환경정보 Vol.6 No.5